Magnetorheological Fluids Behaviour in Oscillatory Compression Squeeze: Experimental Testing and Analysis

Horak, Wojciech; Szczęch, Marcin; Sapiński, Bogdan

doi:10.2478/ama-2019-0029

Abstract

This article deals with experimental testing of magnetorheological fluid (MRF) behaviour in the oscillatory squeeze mode. The authors investigate and analyse the influence of excitation frequency and magnetic field density level on axial force in MRFs that differ in particle volume fraction. The results show that, under certain conditions, the phenomenon of self-sealing can occur as a result of the magnetic field gradient and a vacuum in the working gap of the system.

References

1. Chengye L., Fengyan Y., Kejun J. (2011), Design and finite element analysis of magnetic circuit for disk MRF brake, Advanced Materials Research, 181-182, 22–527.10.4028/www.scientific.net/AMR.181-182.522
Search in Google Scholar Back to article
2. Farjoud A., Vahdati N., Fah Y. (2008), MR-fluid yield surface determination in disc-type MR rotary brakes, Smart Materials and Structures, 17(3), 1–8.10.1088/0964-1726/17/3/035021
Search in Google Scholar Back to article
3. Farjoud A., Craft M., Burke W., Ahmadian M. (2011), Experimental investigation of MR squeeze mounts, Journal of Intelligent Material Systems and Structures, 22, 1645–1652.10.1177/1045389X11411225
Search in Google Scholar Back to article
4. Guo C, Gong X, Xuan S, Zong L and Peng C. (2012), Normal forces of magnetorheological fluids under oscillatory shear, J. Magn. Magn. Mater, 324, 1218.
Search in Google Scholar Back to article
Guo C., Gong X., Xuan S., Yan Q. and Ruan X. (2013), Squeeze Squeeze behavior of magnetorheological fluids under constant volume and uniform magnetic field, Smart Materials and Structures, 22(4), 045020.10.1088/0964-1726/22/4/045020
Search in Google Scholar Back to article
6. Gstöttenbauer N., Kainz A, Manhartsgruber B. (2008), Experimental and numerical studies of squeeze mode behaviour of magnetic fluid, Proc. IMechE Part C, J. Mechanical Engineering Science, 222(12), 2395-240710.1243/09544062JMES1129
Search in Google Scholar Back to article
7. Guldbakke J. M., Hesselbach, J. (2006), Development of bearings and a damper based on magnetically controllable fluids, J. Phys., Condens. Matter, 18(38), 2959–2972.10.1088/0953-8984/18/38/S29
Search in Google Scholar Back to article
8. Gołdasz J., Sapiński B. (2011), Model of a squeeze mode magnetorheological mount, Solid State Phenomena, 177, 116–124.10.4028/www.scientific.net/SSP.177.116
Search in Google Scholar Back to article
9. Goncalves F.D., Carlson J.D. (2009) An alternate operation mode for MR fluids – magnetic gradient pinch, Journal of Physics, Conference Series, 149(1), 012050.10.1088/1742-6596/149/1/012050
Search in Google Scholar Back to article
10. Horak W. Sapiński B., Szczęch M. (2017), Analysis of force in MR fluids during oscillatory compression squeeze, Acta Mechanica et Automatica, 11 (1), 64–68.10.1515/ama-2017-0010
Search in Google Scholar Back to article
11. Horak W. (2018) Modeling of magnetorheological fluid in quasi-static squeeze flow mod, Smart Materials and Structures, 27 (6), 065022.10.1088/1361-665X/aab7c7
Search in Google Scholar Back to article
12. Kubík M., Macháček O., Strecker Z., Roupec, J, Mazůrek I. (2017), Design and testing of magnetorheological valve with fast force response time and great dynamic force range, Smart Material and Structures, 26(4), 047002.10.1088/1361-665X/aa6066
Search in Google Scholar Back to article
13. Kuzhir P., López-López M. T., Vertelov G., Pradille C., Bossis G. (2008), Oscillatory squeeze flow of suspensions of magnetic polymerized chains, J. Phys., Condens. Matter, 20204132.10.1088/0953-8984/20/20/20413221694261
Search in Google Scholar Back to article
14. Laun H.M., Gabriel C., Schmidt G. (2008), Primary and secondary normal stress differences of a magnetorheological fluid (MRF) up to magnetic flux densities of 1 T, Journal of Non-Newtonian Fluid Mechanic, 148(1), 47-56.10.1016/j.jnnfm.2007.04.019
Search in Google Scholar Back to article
15. Liu W., Luo Y., Yang B., Lu W. (2019), Design and Mechanical Model Analysis of Magnetorheological Fluid Damper, American Journal of Mechanics and Applications, 4(1), 15-19.10.11648/j.ajma.20160401.13
Search in Google Scholar Back to article
16. Mazlan S. (2007), The performance of magnetorheological fluid in squeeze mode, Smart Materials and Structures, 16(5), 1678-1682.10.1088/0964-1726/16/5/021
Search in Google Scholar Back to article
17. Szczęch M., Horak W. (2018), Analysis of the magnetic field distribution in the parallel plate rheometer measuring system, Tribologia, 49(2),117-122.10.5604/01.3001.0012.6984
Search in Google Scholar Back to article
18. Tao R. (2011), Super-strong magnetorheological fluids, Journal of Physics: Condensed Matter, 13(50), 979–999.10.1088/0953-8984/13/50/202
Search in Google Scholar Back to article
19. Wang N., Liu X., Zhang X., (2019), Squeeze-Strengthening Effect of Silicone Oil-Based Magnetorheological Fluid with Nanometer Fe3O4 Addition in High-Torque Magnetorheological Brake, Journal of Nanoscience and Nanotechnology, 1, 19(5), 2633-2639.
Search in Google Scholar Back to article
20. Zhang X. J., Farjud A., Ahmadian M., Guo K. H., Craft M. (2011), Dynamic Testing and Modelling of an MR Squeeze Mount, Journal of Intelligent Material Systems and Structures, 22, 1717-1728.10.1177/1045389X11424217
Search in Google Scholar Back to article

Magnetorheological Fluids Behaviour in Oscillatory Compression Squeeze: Experimental Testing and Analysis

Abstract

Paradigm

My account