References
- 1. Abrao AM., Faria PE., Campos Rubio JC., Reis P., Paulo Davim J., (2007), Drilling of fiber reinforced plastics: a review. International Journal of Manufacturing Technology, 186: 1–7.
- 2. Arroyoa J.M, Diniz A.E., Fernandes de Lima M.S., (2010), Wear performance of laser precoating treated cemented carbide milling tools, Wear 268, 1329–1336.
- 3. Atanasov P. A., Baeva M. G., (1997), CW CO2 laser cutting of plastics, Proceedings SPIE 3092, 772–775.
- 4. Bohdal L., (2016), The application of the smoothed particle hydrodynamics (SPH) method to the simulation and analysis of blanking process, Mechanika, 22 (5), 380–387.
- 5. Caiazzo F., Ciurcio F., Daurelio G., Memola Capece Minutolo F., (2005), Laser cutting of different polymeric plastics (PE, PP and PC) by CO2 laser beam, Journal of Materials Processing Technology, 159, 279–285.
- 6. Cuong T.V., Pham V.H., Tran Q.T., Hahn S.H., Chung J.S., Shin E.W., Kim E.J., (2010), Photoluminescence and Raman studies of graphene thin films prepared by reduction of graphene oxide, Materials Letters 64, 399–40.
- 7. Deng J., Li S., Xing Y., Li Y., (2014), Studies on thermal shock resistance of TiN and TiAlN coatings under pulsed laser irradiation, Surface Engineering 30 (3), 195–203.
- 8. Eltawahni H. A., Olabi A. G., Benyounis K. Y., (2010), Effect of process parameters and optimization of CO2 laser cutting of ultra high performance polyethylene, Materials and Design 31 (8), 4029-4038.
- 9. Huang Y.J., Huang Y.P., Chiang P.Y., Liang H.C., Su K.W., Chen Y.-F. (2012), High-power passively Q-switched Nd:YVO4 UV laser at 355 nm, Applied Physics B., 106, 893–898.
- 10. Karnakis D., Fieret J., Rumsby P., Gower M. (2010), Microhole drilling using reshaped pulsed Gaussian beams (private correspondence).
- 11. Kiselev A. M., Ponomarev Yu. N., Stepanov A. N., Tikhomirov A. B., Tikhomirov B. A., (2011), Nonlinear absorption of femtosecond laser pulses (800 nm) by atmospheric air and water vapour, Quantum Electronics 41 (11), 976–980.
- 12. Kurt M., Kaynak Y., Bagei E., Demirer H., Kurt M., (2009), Dimensional analyses and surface quality of laser cutting process for engineering plastics, International Journal of Manufacturing Technology, 41, 259–267.
- 13. Langer M., Rechner R., Thieme M., Jansen I., Beyer E., (2012), Surface analytical characterisation of Nd:YAG-laser pre-treated Al Mg3 as a preparation for bonding, Solid State Sciences 14(7):926–35.
- 14. Leone C., Papa I., Tagliaferri F., Lopresto V., (2013), Investigation of CFRP laser milling using a 30W Q-switched Yb:YAG fiber laser: Effect of process parameters on removal mechanisms and HAZ formation. Composites Part A: Applied Science and Manufacturing 55, 129–42.
- 15. Li Z.L., Zheng H.Y., Lim G.C., Chu P.L., Li L., (2010), Study on UV laser machining quality of carbon fiber reinforced composites. Composites: Part A 41, 1403–1408.
- 16. Miraouri I., Boujelbene M., Bayraktar E. (2014), Analysis of roughness and heat affected zone of steel plates obtained by laser cutting, Advanced Materials Research, 974, 169–173.
- 17. Perry T.L., Werschmoeller D., Li X.C., Pfefferkorn F.E., Duffie N.A., (2009), Pulsed laser polishing of micro-milled Ti6Al4V samples. Journal of Manufacturing Processes 11(2):74–81.
- 18. Ragusich A., Taillon G., Meunier M., Martinu L., Klemberg-Sapieha J.E., (2013), Selective pulsed laser stripping of TiAlN erosion-resistant coatings: effect of wavelength and pulse duration, Surface Coating Technology 232, 758–766.
- 19. Sotnikov A., Laux H., Stritzker B., (2010), Experimental and Numerical Optimization of Beam Shapes for Short-Pulse Ultraviolet Laser Cutting Processing, Physics Procedia 5, 137–146.
- 20. Uebel M., Bliedtner J., (2014), Laser precision cutting of high-melting metal foils, Procedia Engineering 69, 99–103.
- 21. Wan D.P., Liang X.C., Meng F.M., Hu D.J., Wang Y.M., Chen N.K, Shao T.M., (2009), Automatic compensation of laser beam focusing parameters for flying optics. Optics and Laser Technology 41(4):499–503.
- 22. Wang X.C., Li Z.L., Chen T., Lok B.K., Low D.K.Y. (2008), 355nm DPSS UV laser cutting of FR4 and BT/epoxy-based PCB substrates, Opt. Lasers Eng. 46, 404-409.
- 23. Zhang Y., Faghri A., (1999) Int. J. Heat Mass Transfer 42, 1775.
- 24. Zhang Y.-L., Guo L., Wei S., He Y., Xia H., Chen Q., Sun H.-B., Xiao F.-S., (2010), Direct imprinting of microcircuits on graphene oxides film by femtosecond laser reduction, Nano Today 5, 15–20.