Investigation of Mechanochemical Leaching of Non-Ferrous Metals

Vladimir Golik; Vladimir Morkun; Natalia Morkun; Vitaliy Tron

doi:10.2478/ama-2019-0016

.blurhash-client-img { display: none !important; }

Investigation of Mechanochemical Leaching of Non-Ferrous Metals

Acta Mechanica et Automatica

Volume 13 (2019): Issue 2 (June 2019)

By: Vladimir Golik, Vladimir Morkun, Natalia Morkun and Vitaliy Tron

Open Access

|Jul 2019

Abstract

The research deals with metal extraction from off-grade ores and concentration tailings. There are provided results of simulating parameters of reagent leaching of metals in the disintegrator according to the metal recovery ratio. The research substantiates the method of waste-free processing of chemically recovered ores. Recovery of metals into solution is the same both under multiple leaching of tailings or ore in the disintegrator and agitation leaching of tailings or ore previously activated in the disintegrator with leaching solutions. The time of agitation leaching is more by two orders of magnitude than that of the disintegrator processing. Recovery of metals into solution is most affected by the content of sodium chloride in the solution. Then, in decreasing order, go the content of sulfuric acid in the solution, the disintegrator rotor rpm and L:S ratio.

References

1. Cetintas, S., Yildiz, U., Bingol, D. (2018), A novel reagent-assisted mechanochemical method for nickel recovery from lateritic ore, Journal of Cleaner Production, 199, 616–632.10.1016/j.jclepro.2018.07.212
Search in Google Scholar Back to article
2. De Oliveira D.M., Sobral L.G.S., Olson G.J., Olson S.B. (2014), Acid leaching of a copper ore by sulphur-oxidizing microorganisms, Hydrometallurgy, 147-148, 223–227.10.1016/j.hydromet.2014.05.019
Search in Google Scholar Back to article
3. Dmitrak Yu.V., Kamnev Ye.N. (2016), The leading design and scientific-research institute of industrial technology – the way 65 years long (in Russian), Mining Journal, 3, 6–12.10.17580/gzh.2016.03.01
Search in Google Scholar Back to article
4. Fan, E., Li, L., Zhang, X., Bian, Y., Xue, Q., Wu, J., Wu, F., Chen, R. (2018), Selective Recovery of Li and Fe from Spent Lithium-Ion Batteries by an Environmentally Friendly Mechanochemical Approach, ACS Sustainable Chemistry & Engineering. 6 (8), 11029–110315.10.1021/acssuschemeng.8b02503
Search in Google Scholar Back to article
5. Gazaleyeva G.I., Mamonov S.B., Bratygin Ye.V., Klyushnikov A.M. (2017), Problems and innovative solutions in technogenic materials concentration (in Russian), GIAB, 1, 257–272.
Search in Google Scholar Back to article
6. Ghorbani Y., Franzidis J.P., Petersen J. (2016), Heap leaching technology – current State, innovations, and future directions: a review, Mineral Processing and Extractive Metallurgy Review, 37(2), 73–119.10.1080/08827508.2015.1115990
Search in Google Scholar Back to article
7. Golik V., Komaschenko V., Morkun V., Khasheva Z. (2015d), The effectiveness of combining the stages of ore fields development, Metallurgical and Mining Industry, 5, 401–405.
Search in Google Scholar Back to article
8. Golik V., Komashchenko V., Morkun V. (2015b), Innovative technologies of metal extraction from the ore processing mill tailings and their integrated use, Metallurgical and Mining Industry, 3, 49–52.
Search in Google Scholar Back to article
9. Golik V., Komashchenko V., Morkun V. (2015c), Feasibility of using the mill tailings for preparation of self-hardening mixtures, Metallurgical and Mining Industry, 3, 38–41.
Search in Google Scholar Back to article
10. Golik V., Komashchenko V., Morkun V. (2015a), Geomechanical terms of use of the mill tailings for preparation, Metallurgical and Mining Industry, 4, 321–324.
Search in Google Scholar Back to article
11. Golik V.I. (2013), Conceptual approaches to creating low- and non-waste mining based on combination of physical-technical and physical-chemical geotechnologies (in Russian), Mining Journal, 5, 93–97.
Search in Google Scholar Back to article
12. Golik, V.I., Stradanchenko, S.G., Maslennikov, S.A. (2015e), Experimental study of non-waste recycling tailings of ferruginous quartzites, International Journal of Applied Engineering Research, 10 (15), 35410–35416.
Search in Google Scholar Back to article
13. Granata, G., Takahashi, K., Kato, T., Tokoro, C. (2018), Mechanochemical activation of chalcopyrite: Relationship between activation mechanism and leaching enhancement, Minerals Engineering. 131, 280–285.10.1016/j.mineng.2018.11.027
Search in Google Scholar Back to article
14. Jarvie-Eggart M.E. (2015), Responsible Mining: Case Studies in Managing Social and Environmental Risks in the Developed World. Englewood, Colorado: Society for Mining, Metallurgy and Exploration.
Search in Google Scholar Back to article
15. Jordens A., Cheng Y.P., Waters K.E. (2013), A review of the beneficiation of rare earth element bearing minerals, Minerals Engineering, 41, 97–114.10.1016/j.mineng.2012.10.017
Search in Google Scholar Back to article
16. Khint Y. (1981), Uda-technology. Special design-technological bureau Disintegrator (in Russian), Tallinn: Valgus.
Search in Google Scholar Back to article
17. Komashchenko V.I., Vasilyev P.V., Maslennikov S.A. (2016), Reliable raw material base of underground mining of KMA deposits (in Russian), Izvestiya TulGU. Earth Sciences, 2, 95–101.
Search in Google Scholar Back to article
18. Liu J., Han Y., Li Y., Zhang S. (2012), Study on mechanism and technology of deep reduction for iron ore leaching, The 26th International Mineral Processing Congress, IMPC 2012: Innovative Processing for Sustainable Growth, New Delhi, India. 2335–2343.
Search in Google Scholar Back to article
19. Lyashenko V.I., Franchuk V.P., Kislyi B.P. (2015), Modernization of the technical and technological complex of uranium mining (in Russian), Mining Journal, 1, 26–32.10.17580/gzh.2015.01.05
Search in Google Scholar Back to article
20. Minagawa, M., Hisatomi, S., Kato, T., Granata, G., Tokoro, C. (2018), Enhancement of copper dissolution by mechanochemical activation of copper ores: Correlation between leaching experiments and DEM simulations, Advanced Powder Technology, 29 (3), 471–478.10.1016/j.apt.2017.11.031
Search in Google Scholar Back to article
21. Morkun, V., Tron, V. (2014), Ore preparation energy-efficient automated control multi-criteria formation with considering of ecological and economic factors, Metallurgical and Mining Industry, 5, 8–10.
Search in Google Scholar Back to article
22. Morozov, A.A, Yakovlev, M.V. (2016), Processing of off-balance uranium ores formed in mining Streltsovo ore deposit (in Russian), GIAB, 12, 174–181.
Search in Google Scholar Back to article
23. Sekisov A.G., Shevchenko Yu.S., Lavrov A.Yu. (2016), Prospects of mine leaching in mining gold ore deposits (in Russian), FTPRRMPI, 1, 110–116.
Search in Google Scholar Back to article
24. Sinclair L., Thompson J. (2015), In situ leaching of copper: Challenges and future prospects, Hydrometallurgy, 157, 306–324.10.1016/j.hydromet.2015.08.022
Search in Google Scholar Back to article
25. Wang H., He Y., Duan C., Zhao Y., Tao Y., Ye C. (2015), Development of Mineral Processing Engineering Education in China University of Mining and Technology, Advances in Computer Science and Engineering, 141, 77–83.10.1007/978-3-642-27948-5_11
Search in Google Scholar Back to article
26. Wang, M., Tan, Q., Li, J. (2018), Unveiling the role and mechanism of mechanochemical activation on lithium cobalt oxide powders from spent lithium-ion batteries, Environmental Science & Technology, 52(22), 13136–13143.10.1021/acs.est.8b0346930207705
Search in Google Scholar Back to article
27. Xie, H., Zhang, L., Li, H., Koppala, S., Yin, S., Li, S., Yang, K., Zhu, F. (2019), Efficient recycling of Pb from zinc leaching residues by using the hydrometallurgical method, Materials research express, 6(7), DOI: 10.1088/2053-1591/ab11b9.10.1088/2053-1591/ab11b9
Open DOI Search in Google Scholar Back to article
28. Yang, Y., Zheng, X., Cao, H., Zhao, C., Lin, X., Ning, P., Zhang, Y., Jin, W., Sun, Z. (2017), A Closed-Loop Process for Selective Metal Recovery from Spent Lithium Iron Phosphate Batteries through Mechanochemical Activation, ACS Sustainable Chemistry & Engineering, 5 (11). 9972–9980.10.1021/acssuschemeng.7b01914
Search in Google Scholar Back to article
29. Zhang, D., Ling, H.; Yang, T., Liu, W.; Chen, L. (2019), Selective leaching of zinc from electric arc furnace dust by a hydrothermal reduction method in a sodium hydroxide system, Journal of Cleaner Production, 224, 536–544.10.1016/j.jclepro.2019.03.149
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/ama-2019-0016 | Journal eISSN: 2300-5319 | Journal ISSN: 1898-4088

Journal RSS Feed

Language: English

Page range: 113 - 123

Submitted on: Dec 17, 2018

Accepted on: Jun 25, 2019

Published on: Jul 25, 2019

Published by: Bialystok University of Technology

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

Experiment,

simulation,

activation,

concentration tailings,

disintegrator,

leaching

Related subjects:

Engineering,

Electrical engineering,

Electronics,

Mechanical engineering,

Mechanics,

Bioengineering and biomedical engineering,

Biomechanics,

Civil engineering,

Environmental engineering

© 2019 Vladimir Golik, Vladimir Morkun, Natalia Morkun, Vitaliy Tron, published by Bialystok University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 13 (2019): Issue 2 (June 2019)