References
- 1. Adamczak S., Janecki D, Makieła W., Stępień K. (2010), Quantitative comparison of cylindricity profiles measured with different methods using Legendre-Fourier coefficients, Metrology and Measurement Systems XVII, 233-244.
- 2. Al-Ahmari A.M.A., Aalam J. (2015), Optimizing parameters of freeform surface reconstruction using CMM, Measurement, 64, 17-28.
- 3. Barini E. M., Tosello G., De Chifre L. (2010) Uncertainty analysis of point-by-point sampling complex surfaces using touch probe CMMs. DOE for complex surfaces verification with CMM, Precision Engineering, 34, 16-21.
- 4. Chen Y., Tang H., Tang Q.,, Zhang A., Chen D., Li K., (2018), Machining error decomposition and compensation of complicated surfaces by EMD method, Measurement, 116, 341-349.
- 5. Chena Y., Gaoa J.,, Deng H., Zhenga D., Chena X., Kelly R. (2013), Spatial statistical analysis and compensation of machining errors for complex surfaces, Precision Engineering 37, 203–212.
- 6. Dietrich E., Schulze A. (2000), Statistical methods in qualification of measuring devices of machines and processes, Notika System, Warsaw (in Polish).
- 7. Feng C-X, Saal A. L., Salsbury J. G., Ness A. R., Lin G. C. S. (2007) Precision Engineering, 31, 94-101.
- 8. ISO 14253-1:2014, Geometrical product specifications (GPS) – Inspection by measurement of workpieces and measuring equipment – Part 1: Decision rules for proving conformity or nonconformity with specification.
- 9. ISO 14253-2:2011, Geometrical product specifications (GPS) – Inspection by measurement of workpieces and measuring equipment – Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification.
- 10. ISO/IEC Guide 98-3:2008, Uncertainty of measurement – Part 3: Guide to the expression of uncertainty in measurement (GUM:1995).
- 11. Jakubiec W., Płowucha W., Starczak M. (2012), Analytical estimation of coordinate measurement uncertainty, Measurement, 45, 2299-2308.
- 12. Karaszewski R., Skrzypczyńska K. (2013), Quality management, TNOiK, Toruń (in Polish).
- 13. Kowalczyk J. (1995), Quality management –Taguchi Method, Bellona, Warsaw (in Polish).
- 14. Mehrad V., Xue D., Gu P. (2013), Prediction of surface reconstruction uncertainties for freeform surface inspection, Measurement 2013, 46, 2682-2694.
- 15. Moroni G., Petrò S. (2014), Optimal inspection strategy planning for geometric tolerance verification, Precision Engineering, 38, 71-81
- 16. Obeidat S.M., Raman S.: An intelligent sampling method for inspecting free-form surfaces. International Journal Advanced Manufacturing Technology 2009, 40, 1125-1136.
- 17. Poniatowska M. (2012), Deviation model based method of planning accuracy inspection of free-form surfaces using CMMs, Measurement, 45, 927-937.
- 18. Rajamohan G., Shunmugam M. S., Samuel G. L. (2011a), Effect of probe size and measurement strategies on assessment of freeform profile deviations using coordinate measuring machine, Measurement, 44, 832-841.
- 19. Rajamohan G., Shunmugam M.S., Samuel G.L. (2011b), Practical measurement strategies for verification of freeform surfaces using coordinate measuring machines, Metrology and Measurement Systems, XVIII, 209-222.
- 20. Savio E., De Chiffre L, Schmitt R. (2007), Metrology of freeform shaped parts, Annals of the CIRP, 56, 810-835.
- 21. Sladek J. A. (2016), Coordinate Metrology: Accuracy of Systems and Measurements. Springer, Berlin Heidelberg.
- 22. Weckenmann A, Estler T., Peggs G., Mc Murtry D. (2004), Probing Systems in Dimensional Metrology, CIRP Ann., 53, 657-684.