Composition-Driven Indirect Structural Defect Engineering in Near-Eutectic Sn-Zn and Sn-Cu-Zn-Sb-Pb Alloys: Structural Complexity and Electrical Functionality
References
- Tripathy SR, Baral SS. Defect Engineering in Semiconductor Photocatalysts: Enhancing Photocatalytic Activity for Green Energy Production. Adv Energy Sustain Res. 2025 Nov;6(11):2500110. doi:10.1002/aesr.202500110
- Luo Y, Wu Y. Defect Engineering of Nanomaterials for Catalysis. Nanomaterials. 2023 Mar 21;13(6):1116. doi:10.3390/nano13061116
- Benton JL, Libertino S, Kringho/j P, Eaglesham DJ, Poate JM, Coffa S. Evolution from point to extended defects in ion implanted silicon. J Appl Phys. 1997 Jul 1;82(1):120–5. doi:10.1063/1.365583
- Luo Y, Wu Y, Huang C, Menon C, Feng S, Chu PK. Plasma modified and tailored defective electrocatalysts for water electrolysis and hydrogen fuel cells. EcoMat. 2022 Jul;4(4):e12197. doi:10.1002/eom2.12197
- Song G, Cong S, Zhao Z. Defect engineering in semiconductor-based SERS. Chem Sci. 2022;13(5):1210–24. doi:10.1039/D1SC05940H
- Ma J, Long R, Liu D, Low J, Xiong Y. Defect Engineering in Photocatalytic Methane Conversion. Small Struct. 2022 Jan;3(1):2100147. doi:10.1002/sstr.202100147
- Liu J, Wei Z, Shangguan W. Defects Engineering in Photocatalytic Water Splitting Materials. ChemCatChem. 2019 Dec 18;11(24):6177–89. doi:10.1002/cctc.201901579
- Liu J, Wei Z, Shangguan W. Defects Engineering in Photocatalytic Water Splitting Materials. ChemCatChem. 2019 Dec 18;11(24):6177–89. doi:10.1002/cctc.201901579
- Nowotny J, Alim MA, Bak T, Idris MA, Ionescu M, Prince K, et al. Defect chemistry and defect engineering of TiO2 -based semiconductors for solar energy conversion. Chem Soc Rev. 2015;44(23):8424–42. doi:10.1039/C4CS00469H
- Schuler B, Lee JH, Kastl C, Cochrane KA, Chen CT, Refaely-Abramson S, et al. How Substitutional Point Defects in Two-Dimensional WS2 Induce Charge Localization, Spin–Orbit Splitting, and Strain. ACS Nano. 2019 Sep 24;13(9):10520–34. doi:10.1021/acsnano.9b04611
- Gajaria TK, Roondhe B, Dabhi SD, Śpiewak P, Kurzydłowski KJ, Jha PK. Hydrogen evolution reaction electrocatalysis trends of confined gallium phosphide with substitutional defects. Int J Hydrog Energy. 2020 Sep;45(44):23928–36. doi:10.1016/j.ijhydene.2019.09.032
- Chen Q, Yang C, Xing T, Xi J, Zhang W, Yang J, et al. Defect engineering and alloying strategies for tailoring thermoelectric behavior in GeTe and its alloys. J Materiomics. 2025 Jan;11(1):100832. doi:10.1016/j.jmat.2024.01.007
- Zheng Y, Slade TJ, Hu L, Tan XY, Luo Y, Luo ZZ, et al. Defect engineering in thermoelectric materials: what have we learned? Chem Soc Rev. 2021;50(16):9022–54. doi:10.1039/D1CS00347J
- Zhang L, Xue S bai, Gao L li, Sheng Z, Ye H, Xiao Z xiang, et al. Development of Sn–Zn lead-free solders bearing alloying elements. J Mater Sci Mater Electron. 2010 Jan;21(1):1–15. doi:10.1007/s10854-009-0014-1
- Suganuma Katsuaki, Kim KSoo. Sn-Zn low temperature solder. In: Lead-Free Electronic Solders [Internet]. Boston, MA: Springer US; 2007 [cited 2026 May 26]. p. 121–7. Available from: http://link.springer.com/10.1007/978-0-387-48433-4_7 doi:10.1007/978-0-387-48433-4_7
- Zhao M, Zhang L, Liu ZQ, Xiong MY, Sun L. Structure and properties of Sn-Cu lead-free solders in electronics packaging. Sci Technol Adv Mater. 2019 Dec 31;20(1):421–44. doi:10.1080/14686996.2019.1591168
- Yu DQ, Xie HP, Wang L. Investigation of interfacial microstructure and wetting property of newly developed Sn–Zn–Cu solders with Cu substrate. J Alloys Compd. 2004 Dec;385(1–2):119–25. doi:10.1016/j.jallcom.2004.04.129
- Yu DQ, Xie HP, Wang L. Investigation of interfacial microstructure and wetting property of newly developed Sn–Zn–Cu solders with Cu substrate. J Alloys Compd. 2004 Dec;385(1–2):119–25. doi:10.1016/j.jallcom.2004.04.129
- Mohamed HS, Mostafa MM, Mahmoud NM. Crystallographic, microstructure, electrical, and hardness characterization of advanced Sn-9Zn-0.5ZrO2 and Sn-9Zn-xNi lead-free solder alloys. J Mater Sci Mater Electron. 2025 May;36(13):784. doi:10.1007/s10854-025-14760-9
- Xiao J, Tong X, Liang J, Chen Q, Tang Q. Microstructure and morphology of the soldering interface of Sn–2.0Ag–1.5Zn low Ag content lead-free solder ball and different substrates. Heliyon. 2023 Feb;9(2):e12952. doi:10.1016/j.heliyon.2023.e12952
- Al-Ezzi AS, Kader Ekhlas, Alazzawi S. Effect of alloying elements on microstructural and electrical property in Sn–Cu–Bi lead-free solder alloys. Weld Int. 2024 Mar 3;38(3):211–24. doi:10.1080/09507116.2024.2317322
- Arı M, Aksöz S, Ata Esener P, Öztürk E. Thermal, electrical, and mechanical properties of Sn-Ag-Zn solder alloys for BGA packaging. Phys B Condens Matter. 2025 Feb;699:416868. doi:10.1016/j.physb.2024.416868
- Villarreal-Loya RE, Garay-Reyes CG, Mendoza-Duarte JM, Hernández-Rivera JL, Cruz-Rivera JJ, Estrada-Guel I, et al. Ultra-low-temperature lead-free multicomponent alloy solder for application in heat-sensitive electronic components. Mater Lett. 2023 Jul;343:134342. doi:10.1016/j.matlet.2023.134342
- Sun Q, Liao X, Dai J, Feng W, Zhang L, Yin L. Recent Advances in Sn-Based Lead-Free Solders for Electronic Packaging: A Review [Internet]. In Review; 2025 [cited 2026 Jul 1]. Available from: https://www.researchsquare.com/article/rs-8100930/v1 doi:10.21203/rs.3.rs-8100930/v1
- Fima P, Gancarz T, Pstruś J, Sypień A. Wetting of Sn-Zn-xIn (x = 0.5, 1.0, 1.5 wt%) Alloys on Cu and Ni Substrates. J Mater Eng Perform. 2012 May;21(5):595–8. doi:10.1007/s11665-012-0124-4
- Xie X, Lin P, Lian B, Xu S, Wang Y, Shi S, et al. Microstructure and Mechanical Properties of In-Doped Low-Temperature SnPb Solders. Materials. 2025 Feb 18;18(4):886. doi:10.3390/ma18040886
- Xu KK, Zhang L, Gao LL, Jiang N, Zhang L, Zhong SJ. Review of microstructure and properties of low temperature lead-free solder in electronic packaging. Sci Technol Adv Mater. 2020 Jan 31;21(1):689–711. doi:10.1080/14686996.2020.1824255
- Gancarz T, Fima P, Pstruś J. Thermal Expansion, Electrical Resistivity, and Spreading Area of Sn-Zn-In Alloys. J Mater Eng Perform. 2014 May;23(5):1524–9. doi:10.1007/s11665-013-0825-3
- Wang X, Cui H, Xiong Y, Li Q, Wang X, Cai S, et al. In-depth investigation of multi-element alloying on the microstructure and mechanical properties of Sn7Sb/Cu joints. J Mater Res Technol. 2025 May;36:7318–29. doi:10.1016/j.jmrt.2025.05.012
- Gerhátová Ž, Babincová P, Drienovský M, Pašák M, Černičková I, Ďuriška L, et al. Microstructure and Corrosion Behavior of Sn–Zn Alloys. Materials. 2022 Oct 16;15(20):7210. doi:10.3390/ma15207210
- Han S, Han SE, Lee TY, Han DG, Park YB, Yoo S. Brittle Fracture Behavior of Sn-Ag-Cu Solder Joints with Ni-Less Surface Finish via Laser-Assisted Bonding. Materials. 2024 Jul 22;17(14):3619. doi:10.3390/ma17143619
- Wang X, Zhang L, Li M lan. Microstructure and properties of Sn-Ag and Sn-Sb lead-free solders in electronics packaging: a review. J Mater Sci Mater Electron. 2022 Feb;33(5):2259–92. doi:10.1007/s10854-021-07437-6
- Xavier MGC, Silva BL, Spinelli JE. Advancing the Solidification of Sn–Bi Alloys for Electronic Packaging: Challenges, Progress, and Future Directions. MetalMat. 2025 Dec;2(4):e70015. doi:10.1002/metm.70015
- El-Taher AM, Fadel MM, Eladly SA, Abd Elrahman AS, Algarni H, Ali HE, et al. Microstructural and mechanical enhancements in Sn–Ag–Cu solder alloys via nickel and bismuth additions. J Mater Sci Mater Electron. 2025 Sep;36(27):1752. doi:10.1007/s10854-025-15640-y
- Kang Y, Choi JJ, Kim DG, Shim HW. The Effect of Bi and Zn Additives on Sn-Ag-Cu Lead-Free Solder Alloys for Ag Reduction. Metals. 2022 Jul 25;12(8):1245. doi:10.3390/met12081245
- Xu P, Zheng X, Li L, Wang Z. Progress and Challenges in Joining for Precision Endoscope Fabrication. Sensors. 2026 May 1;26(9):2828. doi:10.3390/s26092828
- Sayyadi R, Naffakh-Moosavy H. The Role of Intermetallic Compounds in Controlling the Microstructural, Physical and Mechanical Properties of Cu-[Sn-Ag-Cu-Bi]-Cu Solder Joints. Sci Rep. 2019 Jun 10;9(1):8389. doi:10.1038/s41598-019-44758-3
- Wu G, Shen J, Muhammad KF, Zhou D, Wong YH, Si Z. Microstructure and mechanical properties of Cu/In–Zn–Sn–Bi/Cu joints bonded with high-entropy alloy solder at ultra-low temperature. J Mater Sci Mater Electron. 2025 Jun;36(16):926. doi:10.1007/s10854-025-14903-y
- Ramli MII, Mohd Salleh MAA, Yasuda H, Chaiprapa J, Nogita K. The effect of Bi on the microstructure, electrical, wettability and mechanical properties of Sn-0.7Cu-0.05Ni alloys for high strength soldering. Mater Des. 2020 Jan;186:108281. doi:10.1016/j.matdes.2019.108281
- Zhong X, Chen L, Medgyes B, Zhang Z, Gao S, Jakab L. Electrochemical migration of Sn and Sn solder alloys: a review. RSC Adv. 2017;7(45):28186–206. doi:10.1039/C7RA04368F
- Zhou Z, Zhou K, Hou X, Luo H. Arc/Spark Optical Emission Spectrometry: Principles, Instrumentation, and Recent Applications. Appl Spectrosc Rev. 2005 May;40(2):165–85. doi:10.1081/ASR-200052001
- Seidel P, Ebert D, Schinke R, Möckel R, Raatz S, Chao M, et al. Comparison of Elemental Analysis Techniques for the Characterization of Commercial Alloys. Metals. 2021 Apr 29;11(5):736. doi:10.3390/met11050736
- Bengtson A. Laser Induced Breakdown Spectroscopy compared with conventional plasma optical emission techniques for the analysis of metals – A review of applications and analytical performance. Spectrochim Acta Part B At Spectrosc. 2017 Aug;134:123–32. doi:10.1016/j.sab.2017.05.006
- Li L, Mao L, Yang J. A Review of Principles, Analytical Methods, and Applications of SEM‐EDS in Cementitious Materials Characterization. Adv Mater Technol. 2025 Apr;10(7):2401175. doi:10.1002/admt.202401175
- Li L, Yang J, Li H, Du Y. Comparative Study on Backscattered Electron Image of Cement Paste Quantified by Frequency Histogram, Overflow and Gaussian Distribution Fitting Method. J Mater Civ Eng. 2022 Jul;34(7):04022124. doi:10.1061/(ASCE)MT.1943-5533.0004272
- Smart LE, Moore EA. Solid State Chemistry [Internet]. 0 ed. CRC Press; 2016 [cited 2026 May 26]. Available from: https://www.taylorfrancis.com/books/9781439847923 doi:10.1201/b12047
- Martin J. Measuring resistance/impedance with the four-wire Kelvin method. Watts Curr Tech Bull. 2014;1:1–11.
- Achternbosch M, Kupsch C, Sardemann G, Bräutigam K. Cadmium Flows Caused by the Worldwide Production of Primary Zinc Metal. J Ind Ecol. 2009 Jun;13(3):438–54. doi:10.1111/j.1530-9290.2009.00128.x
- Fosu AY, Bartier D, Diot F, Kanari N. Insight into the Extractive Metallurgy of Tin from Cassiterite. Materials. 2024 Jul 4;17(13):3312. doi:10.3390/ma17133312
- Huang J, Li M, Chen J, Cheng Y, Lai Z, Hu J, et al. Electronic structure and atomic migration of the fourth, fifth, and sixth period atoms in aluminum alloys: First principles calculation. Vacuum. 2023 Apr;210:111823. doi:10.1016/j.vacuum.2023.111823
- Schwartz MO. Cadmium in Zinc Deposits: Economic Geology of a Polluting Element. Int Geol Rev. 2000 May;42(5):445–69. doi:10.1080/00206810009465091
- Ata Esener P, Demirel B, Aksöz S. Effect of Sb and In additives on thermal and electrical properties of Sn–9Zn–4Bi alternative lead-free solder alloy. Mater Chem Phys. 2023 Feb;296:127223. doi:10.1016/j.matchemphys.2022.127223
- Plevachuk Yu, Sklyarchuk V, Hoyer W, Kaban I. Electrical conductivity, thermoelectric power and viscosity of liquid Sn-based alloys. J Mater Sci. 2006 Jul;41(14):4632–5. doi:10.1007/s10853-006-0053-4
- Tan XF, Hao Q, Zhou J, McDonald SD, Sweatman K, Nogita K. The Effect of Temperature on the Electrical Resistivity of Sn-Bi Alloys. J Electron Mater. 2024 Mar;53(3):1183–91. doi:10.1007/s11664-023-10849-1
Language: English
Page range: 5 - 25
Submitted on: May 15, 2026
Accepted on: Jul 27, 2026
Published online: Oct 8, 2026
Published in print: Sep 1, 2026
Published by: Gdansk University of Technology
In partnership with: Paradigm Publishing Services
Related subjects:
© 2026 Mostafa M. Basheir, Ruchi Nair, Mukesh P. Chaudhari, Biplob Sen, Meki K. Bedasa, Rania Hasan, Hitesh D. Patel, published by Gdansk University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.