References
- Plastics Europe Market Research Group (PEMRG), Conversio Market & Strategy GmbH, Plastics Europe Market Data. Dostęp online: https://plasticseurope.org/pl/resources/market-data/, dostęp: 15.08.2024.
- European Parliament, Ecodesign Regulation: European Parliament legislative resolution of 23 April 2024 on the proposal for a regulation establishing a framework for setting eco-design requirements for sustainable products and repealing Directive 2009/125/EC. COM(2022)0142 – C9-0132/2022 – 2022/0095(COD).
- T. Zink, R. Geyer, R. Startz, A market-based framework for quantifying displaced production from recycling or reuse. J. Ind. Ecol. 20 (2024) 719–729.
- European Parliament and Council of the European Union, Directive 94/62/EC of 20 December 1994 on packaging and packaging waste. Official Journal of the European Union, L 365 (1994) 10–23. Access online: https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:31994L0062.
- Plastics Europe, Plastics – the Fast Facts 2023. Plastics Europe (2023).
- Plastics Europe, The Circular Economy for Plastics – A European Analysis. Plastics Europe (2024).
- D.H. Meadows, D.L. Meadows, J. Randers, W.W. Behrens III, The limits to growth: A report for the Club of Rome's project on the predicament of mankind. Universe Books (1972).
- M. Lewandowski, Designing the Business Models for Circular Economy—Towards the Conceptual Framework. Sustainability 8(1) (2016) 43. https://doi.org/10.3390/su8010043.
- J. Hopewell, R. Dvorak, E. Kosior, Plastics recycling: challenges and opportunities. Phil. Trans. R. Soc. B 364 (2009) 2115–2126.
- E.N. Kalali, S. Lotfian, M.E. Shabestari, S. Khayatzadeh, C. Zhao, H.Y. Nezhad, A critical review of the current progress of plastic waste recycling technology in structural materials. Curr. Opin. Green Sustain. Chem. 40 (2023) 100763.
- K. Hamad, M. Kaseem, F. Deri, Recycling of waste from polymer materials: An overview of the recent works. Polym. Degrad. Stabil. 98(12) (2013) 2801–2812.
- M.Y. Khalid, Z.U. Arif, W. Ahmed, H. Arshad, Recent trends in recycling and reusing techniques of different plastic polymers and their composite materials. Sustain. Mater. Technol. 31 (2022) e00382.
- V. Shanmugam, O. Das, R.E. Neisiany et al., Polymer Recycling in Additive Manufacturing: an Opportunity for the Circular Economy. Mater. Circ. Econ. 2 (2020) 11.
- J.N. Hahladakis, E. Iacovidou, S. Gerassimidou, Plastic waste in a circular economy. Environ. Mater. Waste (Second Edition), Elsevier (2024) Chapter 4.
- X. Zhao, M. Korey, K. Li, K. Copenhaver, H. Tekinalp, S. Celik, K. Kalaitzidou, R. Ruan, A.J. Ragauskas, S. Ozcan, Plastic waste upcycling toward a circular economy. Chem. Eng. J. 428 (2022) 131928.
- R. Meys, F. Frick, S. Westhues, A. Sternberg, J. Klankermayer, A. Bardow, Towards a circular economy for plastic packaging wastes – the environmental potential of chemical recycling. Resour. Conserv. Recycl. 162 (2020) 105010.
- N. Aurisano, R. Weber, P. Fantke, Enabling a circular economy for chemicals in plastics. Curr. Opin. Green Sustain. Chem. 31 (2021) 100513.
- J. Schmidt, L. Grau, M. Auer, R. Maletz, J. Woidasky, Multilayer Packaging in a Circular Economy. Polymers 14 (2022) 1825.
- E.C. Boz Noyan, A. Boldizar, Blow molding of mechanically recycled post-consumer rigid polyethylene packaging waste. Polym. Eng. Sci. 64 (2024) 5968–5983.
- J. Sanetuntikul, K. Ketpang, P. Naknaen, B. Narupai, N. Petchwattana, A circular economy use of waste metalized plastic film as a reinforcing filler in recycled polypropylene packaging for injection molding applications. Cleaner Eng. Technol. 17 (2023) 100683.
- D. Matykiewicz, T. Olszewski, J. Andrzejewski, Waste Management after the Injection Process by Manufacturing Polyamide Products Based on Regranulate. Chem. Eng. 7 (2023) 51.
- Ž. Simon, F. Stojcevski, B. Dharmasiri, L.C. Henderson, N. Amini, Circular economy-driven additive manufacturing: A model for recycling PLA/copper composites through multi-extrusion processing. J. Ind. Eng. Chem. 130(9) (2024).
- J.R. Wagner Jr., Multilayer Flexible Packaging. 2nd Edition, Elsevier (2016).
- M. Bilewicz, T. Tański, T. Gliński, J. Viana, Structure of N-Layer Film Obtained by Developed Blow Molding Process. Solid State Phenom. 326 (2021) 1662–9779.
- T. Gliński, T. Tański, M. Bilewicz, Przemysłowe technologie rozdmuchu materiałów polimerowych. LAB Laboratoria, Aparatura, Badania (2021).
- B. Bamps, M. Buntinx, R. Peeters, Seal materials in flexible plastic food packaging: A review. Packag. Technol. Sci. 36 (2023) 507–532.
- B. Bamps, K. D'huys, I. Schreib, B. Stephan, B.D. Ketelaere, R. Peeters, Evaluation and optimization of seal behaviour through solid contamination of heat-sealed films. Packag. Technol. Sci. (2019) 1–10.
- I. Ilhan, R. ten Klooster, I. Gibson, Observing the effect of pressure and temperature on the seal integrity of critical seal regions of various flexible bag designs. Food Packag. Shelf Life 37 (2023) 101088.