References
- M.K. Habibi, S.P. Joshi, M. Gupta, Hierarchical magnesium nano-composites for enhanced mechanical response. Acta Mater. 58 (2010) 6104-6114.
- S. Tekumalla, Y. Nandigam, N. Bibhanshu, S. Rajashekara, C. Yang, S. Suwas, M. Gupta, A strong and deformable in-situ magnesium nanocomposite igniting above 1000°C. Sci. Rep. 8 (2018) 1-10.
- S.C. Tjong, Z.Y. Ma, Microstructural and mechanical characteristics of in situ metal matrix composites. Mater. Sci. Eng. R Rep. 29 (2000) 49-113.
- M.O. Lai, Y. Su, H.L. Teo, C.F. Feng, In situ TiB2 reinforced Al alloy composites. Scr. Mater. 45 (2001) 1017-1023.
- M.S. Asl, B. Nayebi, A. Motallebzadeh, M. Shokouhimehr, Nanoindentation and nanostructural characterization of ZrB2–SiC composite doped with graphite nanoflakes. Compos. Part B (2019).
- F.J. Haussonne, Review of the synthesis methods for AIN. Mater. Manuf. Process. 10 (1998) 717–755.
- H. Karako, Influence of B4C particle reinforcement on mechanical and machining properties of Al6061/B4C composites. Compos. Part B Eng. 101 (2016) 87–98.
- M. Hadian, H. Shahrajabian, M. Ra, Mechanical properties and microstructure of Al/(TiC+TiB2) composite fabricated by spark plasma sintering. Ceram. Int. 45 (2019) 12088-12092.
- S.K. Soni, D. Ganatra, P. Mendiratta, C.S.K.A. Reddy, B. Thomas, microstructure and mechanical characterization of Al2O3/graphene reinforced Al6061 based hybrid nanocomposites. Met. Mater. Int. 28 (2022) 545–555.
- K. Hu, D. Yuan, S. Lu, S. Wu, Effects of nano-SiCp content on microstructure and mechanical properties of SiCp/A356 composites assisted with ultrasonic treatment. Trans. Nonferrous Met. Soc. China English Ed. 28 (2018) 2173–2180.
- P. Madhukar, N. Selvaraj, R. Gujjala, C.S.P. Rao, Production of high performance AA7150-1% SiC nanocomposite by novel fabrication process of ultrasonication assisted stir casting. Ultrason. Sonochem. 58 (2019) 104665.
- A. Çanakçı, A.H. Karabacak, M. Çelebi, S. Özkaya, K.A. Arpacı, A Study on the Optimization of Nano-B4C Content for the Best Wear and Corrosion Properties of the Al-Based Hybrid Nanocomposites. Arab. J. Sci. Eng. 49 (2024) 14625–1464.
- X. Kai, K. Tian, C. Wang, L. Jiao, G. Chen, Y. Zhao, Effects of ultrasonic vibration on the microstructure and tensile properties of the nano ZrB2/2024Al composites synthesized by direct melt reaction. J. Alloys Compd. 668 (2016) 121–127.
- S.K. Soni, D. Manimaran, S.B. Thomas, B. Thomas, Microstructure and mechanical characterization of Al6061 based composite and nanocomposites prepared via conventional and ultrasonic-assisted melt stirring techniques. Mater. Today Commun. 34 (2023) 105222.
- R. Yang, Z. Zhang, Y. Zhao, G. Chen, M. Liu, L. Jiao, L. Chen, Microstructure-property analysis of ZrB2/6061Al hierarchical nanocomposites fabricated by direct melt reaction. Mater. Char. 112 (2016) 51-59.
- P.K. Dinesh Kumar, D.G. Solomon, Investigations on microstructure and mechanical properties on LM30-B4C nanocomposites, fabricated through ultrasonic-squeeze assisted stir-casting. Mater Today Commun. 37 (2023).
- M. Shayan, B. Eghbali, B. Niroumand, Fabrication of AA2024−TiO2 nanocomposites through stir casting process. Trans. Nonferrous Met. Soc. China English Ed. 30 (2020) 2891–2903.
- R. Harichandran, N. Selvakumar, Microstructure and mechanical characterization of (B4C+ h-BN)/Al hybrid nanocomposites processed by ultrasound assisted casting. Int. J. Mech. Sci. 144 (2018) 814–826.
- M. Shayan, B. Eghbali, B. Niroumand, Synthesis of AA2024-(SiO2np+TiO2np) hybrid nanocomposite via stir casting process. Mater. Sci. Eng. A 756 (2019) 484–491.
- P. Lakshmanan, Abrasive wear behaviour of aluminium hybrid nanocomposites produced by ultrasonication assisted casting method. Int. J. Automot. Eng. 14(3) (2017) 4561-4573.
- V. Kumar, S. Singh, Dry sliding wear characteristics of hybrid aluminum alloy with nano-fly ash and nano-yttrium oxide. P. I. Mech. Eng. E-J. Pro, J. (2024) 1-10.
- E. Özer, M. Ayvaz, M. Übeyli, İ. Sarpkaya, Effect of Heat Treatment and Reinforcement Content on the Wear Behavior of Al–4Cu/Al2O3–CNT Nanocomposites. Arab. J. Sci. Eng. 49 (2024) 14911–14926.
- R. Venkatesh, K. Logesh, S. Singh, P.K. Singh, I. Hossain, V. Mohanavel, M.E.M. Soudagar, S.A. Alharbi, S. Al Obaid, Aluminium alloy nanocomposite made with SiC via ultrasonic stir casting: behaviour study. J. Mech. Sci. Technol. 38 (2024) 4145-4151.
- M. Alipour, R. Eslami-Farsani, Synthesis and characterization of graphene nanoplatelets reinforced AA7068 matrix nanocomposites produced by liquid metallurgy route. Mater. Sci. Eng. A, 706 (2017) 71-82.
- S.P. Singh, K.A.V. Geethan, D. Elilraja, T. Prabhuram, J.I. Durairaj, Optimization of dry sliding wear performance of functionally graded Al6061 /20% SiC metal matrix composite using Taguchi method. Mater. Today Proc. 22(4) (2020) 2824-2831.
- A. Prasad Reddy, P. Vamsi Krishna, R.N. Rao, Tribological Behaviour of Al6061–2SiC-xGr Hybrid Metal Matrix Nanocomposites Fabricated through Ultrasonically Assisted Stir Casting Technique. Silicon, 11 (2019) 2853–2871.
- P.S. Tile, B. Thomas, Effect of load, sliding velocity, and reinforcements on wear characteristics of Al7075-based composite and nanocomposites fabricated by ultrasonic-assisted stir-casting technique, Inter. Metalcast 18 (2024) 180–195.
- T.K. Braide, C.C. Nwobi-Okoye, V.C. Ezechukwu, Taguchi–Grey multi-response optimization of wear parameter of new nanocomposite formulation of Al–Si–Mg alloy reinforced with synthesis carbon nanotube and periwinkle shell nanoparticles. Int. J. Adv. Manuf. Technol. 120 (2022) 8363–8375.
- A. Bhowmik, S. Dey, D. Dey, A. Biswas, Dry Sliding Wear Performance of Al7075/SiC Composites by Applying Grey-Fuzzy Approach. Silicon 13 (2021) 3665–3680.