References
- S.M. Walley, Historical origins of indentation hardness testing, Mater. Sci. Technol. (United Kingdom). 28 (2012) 1028–1044. https://doi.org/10.1179/1743284711Y.0000000127.
- S. Arunkumar, A Review of Indentation Theory, Mater. Today Proc. 5 (2018) 23664–23673. https://doi.org/10.1016/j.matpr.2018.10.156.
- G.D. Quinn, R.C. Bradt, On the Vickers Indentation Fracture Toughness Test, 680 (2007) 673–680. https://doi.org/10.1111/j.1551-2916.2006.01482.x.
- N. Ogasawara, N. Chiba, X. Chen, Measuring the plastic properties of bulk materials by single indentation test, 54 (2006) 65–70. https://doi.org/10.1016/j.scriptamat.2005.09.009.
- J. Hay, Introduction to instrumented indentation testing, Exp. Tech. 33 (2009) 66–72.
- T. Nakamura, T. Wang, S. Sampath, Determination of properties of graded materials by inverse analysis and instrumented indentation, Acta Mater. 48 (2000) 4293–4306. https://doi.org/10.1016/S1359-6454(00)00217-2.
- H. Wang, L. Zhu, B. Xu, Residual Stresses and Nanoindentation Testing of Films and Coatings, Residual Stress. Nanoindentation Test. Film. Coatings. (2018) 21–36. https://doi.org/10.1007/978-981-10-7841-5.
- J. Fu, S. Kamali-Bernard, F. Bernard, M. Cornen, Comparison of mechanical properties of C-S-H and portlandite between nano-indentation experiments and a modeling approach using various simulation techniques, Compos. Part B Eng. 151 (2018) 127–138. https://doi.org/10.1016/j.compositesb.2018.05.043.
- A. Alhasanyah, T.K. Vaidyanathan, R.J. Flinton, Effect of core thickness differences on post-fatigue indentation fracture resistance of veneered zirconia crowns, J. Prosthodont. 22 (2013) 383–390. https://doi.org/10.1111/jopr.12016.
- W.K. Lim, J.H. Song, B. V. Sankar, Effect of ring indentation on fatigue crack growth in an aluminum plate, Int. J. Fatigue. 25 (2003) 1271–1277. https://doi.org/10.1016/j.ijfatigue.2003.08.011.
- T.W. Clyne, J.E. Campbell, M. Burley, J. Dean, Profilometry-Based Inverse Finite Element Method Indentation Plastometry, Adv. Eng. Mater. 23 (2021). https://doi.org/10.1002/adem.202100437.
- N. Razavi, M.R. Ayatollahi, A. Amouzadi, F. Berto, Effects of different indentation methods on fatigue life extension of cracked specimens, Fatigue Fract. Eng. Mater. Struct. 41 (2018) 287–299. https://doi.org/10.1111/ffe.12678.
- R. Růžek, J. Pavlas, R. Doubrava, Application of indentation as a retardation mechanism for fatigue crack growth, Int. J. Fatigue. 37 (2012) 92–99. https://doi.org/10.1016/j.ijfatigue.2011.09.012.
- X.D. Hou, N.M. Jennett, A method to separate and quantify the effects of indentation size, residual stress and plastic damage when mapping properties using instrumented indentation, J. Phys. D. Appl. Phys. 50 (2017). https://doi.org/10.1088/1361-6463/aa8a22.
- S. Syngellakis, H. Habbab, B.G. Mellor, Finite element simulation of spherical indentation experiments, Comput. Exp. Stud. (2018) 129.
- M. Aldarwish, A. Grbović, G. Kastratović, A. Sedmak, M. Lazić, Stress intensity factors evaluation at tips of multi-site cracks in unstiffened 2024-t3 aluminium panel using XFEM, Teh. Vjesn. 25 (2018) 1616–1622. https://doi.org/10.17559/TV-20170309133824.
- Y.A. Fageehi, A.M. Alshoaibi, Nonplanar Crack Growth Simulation of Multiple Cracks Using Finite Element Method, Adv. Mater. Sci. Eng. 2020 (2020). https://doi.org/10.1155/2020/8379695.
- B. Seyfi, N. Fatouraee, M. Imeni, Mechanical modeling and characterization of meniscus tissue using flat punch indentation and inverse finite element method, J. Mech. Behav. Biomed. Mater. 77 (2018) 337–346. https://doi.org/10.1016/j.jmbbm.2017.09.023.
- S. Carlsson, P.-L. Larsson, On the determination of residual stress and strain fields by sharp indentation testing.: Part II: experimental investigation, Acta Mater. 49 (2001) 2193–2203.
- N. Huber, J. Heerens, On the effect of a general residual stress state on indentation and hardness testing, Acta Mater. 56 (2008) 6205–6213.
- N. Razavi, M.R. Ayatollahi, F. Berto, Assessment of fatigue crack growth behavior of cracked specimens repaired by indentation, Procedia Struct. Integr. 13 (2018) 69–73.
- L. Deng, J. Zhao, Z. Wang, Estimation of residual stress of metal material with yield plateau by continuous spherical indentation method, Mater. Res. Express. 7 (2020). https://doi.org/10.1088/2053-1591/ab7069.
- P. Chantikul, G.R. Anstis, B.R. Lawn, D.B. Marshall, A critical evaluation of indentation techniques for measuring fracture toughness: II, strength method, J. Am. Ceram. Soc. 64 (1981) 539–543.
- N.H. Faisal, R. Ahmed, R.L. Reuben, Indentation testing and its acoustic emission response: applications and emerging trends, Int. Mater. Rev. 56 (2011) 98-142.
- T.N. Chakherlou, J. Vogwell, The effect of cold expansion on improving the fatigue life of fastener holes, Eng. Fail. Anal. 10 (2003) 13–24.
- A. Djebli, A. Baltach, M. Lallam, M. Bendouba, Numerical Analysis of Plate Thickness Effect on Residual Stress Distribution around a Cold Expanded Hole, Trans. FAMENA. 47 (2023) 47–59.
- A. Baltach, A. Djebli, M. Bendouba, A. Aid, others, Numerical analysis and optimization of the residual stresses distribution induced by cold expansion technique, Frat. Ed Integrità Strutt. 12 (2018) 252–265.
- H. Hosseini-Toudeshky, B. Mohammadi, H.R. Daghyani, Mixed-mode fracture analysis of aluminium repaired panels using composite patches, Compos. Sci. Technol. 66 (2006) 188–198.
- M. Bendouba, A. Djebli, A. Aid, N. Benseddiq, M. Benguediab, Time-dependent J-integral solution for semi-elliptical surface crack in HDPE, C. Mater. Con. 45 (2015) 163–186.
- Harter JA. AFGROW users guide and technical manual, AFRL-VA-WP-TR-2008, Air Force Research Laboratory, Ohio, USA; 2008
- B. Farahmand, G. Bockrath, J. Glassco, Fatigue and fracture mechanics of high risk parts: application of LEFM \& FMDM theory, Springer Science \& Business Media, 2012.