References
- Bigaj M., Boczkal S., Żelechowski J., Gawlik M., Mitka M.: Heat treated AZ61 magnesium alloy obtained by direct extrusion and continuous rotary extrusion process. Arch. Metall. Mater. 2016, 61, 1, 405–410.
- Kumar, P., Ghosh, S. K., Barma, J. D., Saravanan, S., Kumar, J.: The joining of magnesium and aluminium alloys by inclined arrangement of explosive welding. Mater. Today Proc. 2023, 76, 536-541.
- Förster W., Binotsch, C., Awiszus, B.: Process Chain for the Production of a Bimetal Component from Mg with a Complete Al Cladding. Metals. 2018, 8(2), 97.
- Osakada, K., Limb, M., Mellor, P.B.: Hydrostatic extrusion of composite rods with hard cores. Int. J. Mech. Sci. 1973, 15, 291–307.
- Story, J.M., Avitzur, B., Hahn, W.C.: The effect of receiver pressure on the observed flow pattern in the hydrostatic extrusion of bimetal rods. ASME J. Eng. Ind. 1976, 98, 909–913.
- Avitzur, B., Wu, R., Talbert, S., Chou, Y.T.: An analytical approach to the problem of core fracture during extrusion of bimetal rods. ASME J. Eng. Ind. 1985, 107, 247–253.
- Kleiner, M., Schomäcker, M., Schikorra, M., Klaus, A.: Manufacture of extruded and continuously reinforced aluminum profiles for ultra-lightweight constructions. Mater. Werkst. 2004, 35, 431–439.
- Jang, D.H., Hwang, B.B.: Deformation Analysis of Co-Extrusion Process of Aluminum Alloy and Copper Alloy. Key Eng. Mater. 2007, 340, 645–648.
- Wang W., Politis N., Wang Y., Zhou X., Balint D., Jiang J.: Solid-state hot forge bonding of aluminium-steel bimetallic gears: Deformation mechanisms, microstructure and mechanical properties. Int. J. Mach. Tools Manuf. 2022, 180, 103930.
- Politis D.J., Lin J., Dean T.A.: Investigation of Material Flow in Forging Bi-metal Components. Steel Res. Inter. 2012, 231-234.
- Engelhardt, M., Grittner, N., Haverkamp, H., Reimche, W., Bormann, D., Bach, F.-W.: Extrusion of hybrid sheet metals. J. Mater. Process. Technol. 2012, 212, 1030–1038.
- Mondal M., Basak S., Das H., Hong S-T., Choi H., Park J-W, Han H.N.: Manufacturing of magnesium/aluminum bimetallic ring components by friction stir assisted simultaneous forging and solid-state joining. Int. J. Precis. Eng. Manuf. - Green Technol. 2021, 8, 1429–1438.
- Szota P., Mroz S., Gontarz A., Stefanik A.: Theoretical and Experimental Analysis of Mg/Al Bimetallic Handle Forging Process. Arch. Metall. Mater. 2019, 64.
- Feuerhack, A., Binotsch, C., Awiszus, A.: Formability of hybrid aluminum-magnesium compounds. Key Eng. Mater. 2013, 554, 21–28.
- Barati F., Barat E.: Determining of Flow Curve of Magnesium AZ61 Alloy Using Ring Test. Int. J. Mech. Prod.Eng. 2015, 5(3), 40-43.
- Negendank M., Mueller S., Reimers W.: Coextrusion of Mg–Al macro composites. J. Mater. Process. Technol. 2012, 212, 1954–1962.
- Priel E., Ungarish Z., Navi N.U.: Co-extrusion of a Mg/Al composite billet: A computational study validated by experiments. J. Mater. Process. Technol. 2016, 236, 103–113.
- Paramsothy M., Srikanth N., Gupta M.: Solidification processed Mg/Al bimetal macrocomposite: Microstructure and mechanical properties. J. Alloys Compd. 2008, 461, 200–208.
- Kong T.F., Chan L.C., Lee T.C.: Experimental Study of Effects of Process Parameters in Forge-Welding Bimetallic Materials: AISI 316L Stainless Steel and 6063 Aluminium Alloy. Strain. 45, 4, 2009.
- Skubisz P., Sinczak J., Bednarek S.: Forgeability of Mg–Al–Zn magnesium alloys in hot and warm closed die forging. J. Mater. Process. Technol. 177, 2006, 210–213.
- Bajor T., Krakowiak M., Szota P.: Numerical Analysis of AZ61 Magnesium Alloy Extrusion Process by Modified Equal Channel Angular Extrusion (Ecae) Method, Metalurgija 53(4), 485-488, 2014.
- Bressan J.D., Martins M.M., Button S.T.: Aluminium Extrusion Analysis By The Finite Volume Method, XII International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS 2013), Barcelona, 3-5 September, 2013.
- Feuerhack A., Binotsch C., Awiszus B., Wolff A., Brämer C., Stockmann M.: Materialeigenschaften und Formänderungsvermögen von stranggepressten Al-Mg-Verbunden in Abhängigkeit der Temperatur. Materwiss Werksttech. 43, 2012, 601-608
- Politis D.J., Lin J., Dean T.A., Balint D.S.: An investigation into the forging of Bi-metal gears, J. Mater. Proc. Technol. 2014, 214, 2248-2260
- Kittner K.: Integrativer Modellansatz bei der Co-Extrusion von Aluminium-Magnesium Verbunden, PhD thesis, TU Chemnitz, Germany, 2012.
- Hu C., Wang K., Liu Q.: Study on a new technological scheme for cold forging of spur gears. J. Mater. Proc. Technol. 2007, 187, 600–603.
- Osakada K., Wang X., Hanami S.: Precision forging of spline by flashless die forging with axially driven die. CIRP Ann. - Manuf. Technol. 1997, 46(1), 209–212.