References
- 1. V. Chitturi, S.R. Pedapati, M. Awang, Challenges in dissimilar friction stir welding of aluminum 5052 and 304 stainless steel alloys, Materialwissenschaft Und Werkstofftechnik. 51 (2020) 811–816. https://doi.org/10.1002/mawe.201900234.10.1002/mawe.201900234
- 2. R. Rai, A. De, H.K.D.H. Bhadeshia, T. DebRoy, Review: friction stir welding tools, Science and Technology of Welding and Joining. 16 (2011) 325–342. https://doi.org/10.1179/1362171811Y.0000000023.10.1179/1362171811Y.0000000023
- 3. M.K. Bilici, Application of Taguchi approach to optimize friction stir spot welding parameters of polypropylene, Materials & Design. 35 (2012) 113–119. https://doi.org/10.1016/j.matdes.2011.08.033.10.1016/j.matdes.2011.08.033
- 4. M. Tutar, H. Aydin, C. Yuce, N. Yavuz, A. Bayram, The optimisation of process parameters for friction stir spot-welded AA3003-H12 aluminium alloy using a Taguchi orthogonal array, Materials & Design. 63 (2014) 789–797. https://doi.org/10.1016/j.matdes.2014.07.003.10.1016/j.matdes.2014.07.003
- 5. S. Singh, G. Singh, C. Prakash, R. Kumar, On the mechanical characteristics of friction stir welded dissimilar polymers: statistical analysis of the processing parameters and morphological investigations of the weld joint, The Journal of the Brazilian Society of Mechanical Sciences and Engineering. 42 (2020) 154. https://doi.org/10.1007/s40430-020-2227-4.10.1007/s40430-020-2227-4
- 6. N. Muhammad, Y.H.P. Manurung, M. Hafidzi, S.K. Abas, G. Tham, E. Haruman, Optimization and modeling of spot welding parameters with simultaneous multiple response consideration using multi-objective Taguchi method and RSM, Journal of Mechanical Science and Technology. 26 (2012) 2365–2370. https://doi.org/10.1007/s12206-012-0618-x.10.1007/s12206-012-0618-x
- 7. R.K. Roy, A primer on the Taguchi method, 2nd ed, Society of Manufacturing Engineers, Dearborn, MI, 2010.
- 8. Y. Javadi, S. Sadeghi, M.A. Najafabadi, Taguchi optimization and ultrasonic measurement of residual stresses in the friction stir welding, Materials & Design. 55 (2014) 27–34. https://doi.org/10.1016/j.matdes.2013.10.021.10.1016/j.matdes.2013.10.021
- 9. D.G. Mohan, J. Tomków, S. Gopi, Induction assisted hybrid friction stir welding of dissimilar materials AA5052 aluminium alloy and X12Cr13 stainless steel, Advances in Materials Science. 21 (2021) 17–30. https://doi.org/10.2478/adms-2021-0015.10.2478/adms-2021-0015
- 10. S. Rajakumar, C. Muralidharan, V. Balasubramanian, Optimization of the friction-stir-welding process and tool parameters to attain a maximum tensile strength of AA7075–T 6 aluminium alloy, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 224 (2010) 1175–1191. https://doi.org/10.1243/09544054JEM1802.10.1243/09544054JEM1802
- 11. Q. Wen, W.Y. Li, W.B. Wang, F.F. Wang, Y.J. Gao, V. Patel, Experimental and numerical investigations of bonding interface behavior in stationary shoulder friction stir lap welding, Journal of Materials Science & Technology. 35 (2019) 192–200. https://doi.org/10.1016/j.jmst.2018.09.028.10.1016/j.jmst.2018.09.028
- 12. I. Sabry, A.M. El-Kassas, A.-H.I. Mourad, D.T. Thekkuden, J. Abu Qudeiri, Friction Stir Welding of T-Joints: Experimental and Statistical Analysis, Journal of Manufacturing and Materials Processing. 3 (2019) 38. https://doi.org/10.3390/jmmp3020038.10.3390/jmmp3020038
- 13. S. Rajakumar, C. Muralidharan, V. Balasubramanian, Statistical analysis to predict grain size and hardness of the weld nugget of friction-stir-welded AA6061-T6 aluminium alloy joints, The International Journal of Advanced Manufacturing Technology. 57 (2011) 151–165. https://doi.org/10.1007/s00170-011-3279-5.10.1007/s00170-011-3279-5
- 14. K. Elangovan, V. Balasubramanian, S. Babu, Predicting tensile strength of friction stir welded AA6061 aluminium alloy joints by a mathematical model, Materials & Design. 30 (2009) 188–193. https://doi.org/10.1016/j.matdes.2008.04.037.10.1016/j.matdes.2008.04.037
- 15. R. Seetharaman, M. Seeman, D. Kanagarajan, P. Sivaraj, I. Saravanan, A statistical evaluation of the corrosion behaviour of friction stir welded AA2024 aluminium alloy, Materials Today: Proceedings. 22 (2020) 673–680. https://doi.org/10.1016/j.matpr.2019.09.066.10.1016/j.matpr.2019.09.066
- 16. A. Goyal, R. Garg, Modeling and optimization of friction stir welding parameters in joining 5086 H32 aluminium alloy, Scientia Iranica Transaction B, Mechanical Engineering. 26 (2018) 2407-2417. https://doi.org/10.24200/sci.2018.5525.1325.10.24200/sci.2018.5525.1325
- 17. G.H. Li, L. Zhou, F.Y. Shu, Y.C. Liu, Statistical and metallurgical analysis of dissimilar friction stir spot welded aluminum/copper metals, The Journal of Materials Engineering and Performance. 29 (2020) 1830–1840. https://doi.org/10.1007/s11665-020-04729-6.10.1007/s11665-020-04729-6
- 18. F. Sarsılmaz, U. Çaydaş, Statistical analysis on mechanical properties of friction-stir-welded AA 1050/AA 5083 couples, The International Journal of Advanced Manufacturing Technology. 43 (2009) 248–255. https://doi.org/10.1007/s00170-008-1716-x.10.1007/s00170-008-1716-x
- 19. C. Bitondo, U. Prisco, A. Squilace, P. Buonadonna, G. Dionoro, Friction-stir welding of AA 2198 butt joints: mechanical characterization of the process and of the welds through DOE analysis, The International Journal of Advanced Manufacturing Technology. 53 (2011) 505–516. https://doi.org/10.1007/s00170-010-2879-9.10.1007/s00170-010-2879-9
- 20. T. Babu Rao, Stochastic Tensile Failure Analysis on Dissimilar AA6061-T6 with AA7075-T6 Friction Stir Welded Joints and Predictive Modeling, Journal of Failure Analysis and Prevention. 20 (2020) 1333–1350. https://doi.org/10.1007/s11668-020-00937-3.10.1007/s11668-020-00937-3
- 21. C.-W. Yang, S.-J. Jiang, Weibull Statistical Analysis of Strength Fluctuation for Failure Prediction and Structural Durability of Friction Stir Welded Al–Cu Dissimilar Joints Correlated to Metallurgical Bonded Characteristics, Materials. 12 (2019) 205. https://doi.org/10.3390/ma12020205.10.3390/ma12020205635642430634455
- 22. H.-J. Sohn, G.D. Haryadi, S.-J. Kim, Statistical aspects of fatigue crack growth life of base metal, weld metal and heat affected zone in FSWed 7075-T651 aluminium alloy, Journal of Mechanical Science and Technology. 28 (2014) 3957–3962. https://doi.org/10.1007/s12206-014-0906-8.10.1007/s12206-014-0906-8
- 23. R. Taghiabadi, N. Aria, Statistical Strength Analysis of Dissimilar AA2024-T6 and AA6061-T6 Friction Stir Welded Joints, The Journal of Materials Engineering and Performance. 28 (2019) 1822–1832. https://doi.org/10.1007/s11665-019-03907-5.10.1007/s11665-019-03907-5
- 24. M.P. de la Parte, J.C. Azofra, H.D.C. Fals, A.S. Roca, M.C.S. Orozco, E.J. Macías, A new way to predict the mechanical properties of friction stir spot welding for Al-Cu joints by energy analysis of the vibration signals, The International Journal of Advanced Manufacturing Technology. 105 (2019) 1823–1834. https://doi.org/10.1007/s00170-019-04396-5.10.1007/s00170-019-04396-5
- 25. T. Medhi, Selection of best process parameters for friction stir welded dissimilar Al-Cu alloy: a novel MCDM amalgamated MORSM approach, Journal of the Brazilian Society of Mechanical Sciences and Engineering. (2020) 22.10.1007/s40430-020-02631-9
- 26. B. Venu, L. Suvarna Raju, K. Venkata Rao, Multiobjective optimization of friction stir weldments of AA2014-T651 by teaching–learning-based optimization, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 234 (2020) 1146–1155. https://doi.org/10.1177/0954406219891755.10.1177/0954406219891755
- 27. U. Kumar, I. Yadav, S. Kumari, K. Kumari, N. Ranjan, R.K. Kesharwani, R. Jain, S. Kumar, S. Pal, D. Chakravarty, S.K. Pal, Defect identification in friction stir welding using discrete wavelet analysis, Advances in Engineering Software. 85 (2015) 43–50. https://doi.org/10.1016/j.advengsoft.2015.02.001.10.1016/j.advengsoft.2015.02.001
- 28. M.D. Sameer, A.K. Birru, Optimization and characterization of dissimilar friction stir welded DP600 dual phase steel and AA6082-T6 aluminium alloy sheets using TOPSIS and grey relational analysis, Materials Research Express. 6 (2019) 056542. https://doi.org/10.1088/2053-1591/aafba4.10.1088/2053-1591/aafba4
- 29. M. Yunus, M.S. Alsoufi, Mathematical Modelling of a Friction Stir Welding Process to Predict the Joint Strength of Two Dissimilar Aluminium Alloys Using Experimental Data and Genetic Programming, Modelling and Simulation in Engineering. 2018 (2018) e4183816. https://doi.org/10.1155/2018/4183816.10.1155/2018/4183816
- 30. X. He, F. Gu, A. Ball, A review of numerical analysis of friction stir welding, Progress in Materials Science. 65 (2014) 1–66. https://doi.org/10.1016/j.pmatsci.2014.03.003.10.1016/j.pmatsci.2014.03.003
- 31. R. Hartl, F. Vieltorf, M.F. Zaeh, Correlations between the surface topography and mechanical properties of friction stir welds, Metals. 10 (2020) 890. https://doi.org/10.3390/met10070890.10.3390/met10070890
- 32. V. Chitturi, S.R. Pedapati, M. Awang, Effect of tilt angle and pin depth on dissimilar friction stir lap welded joints of aluminum and steel alloys, Materials. 12 (2019) 3901. https://doi.org/10.3390/ma12233901.10.3390/ma12233901692658431779107
- 33. L. Wan, Y. Huang, Microstructure and Mechanical Properties of Al/Steel Friction Stir Lap Weld, Metals. 7 (2017) 542. https://doi.org/10.3390/met7120542.10.3390/met7120542
- 34. P.J. Ross, Taguchi Techniques For Quality Engineering: Loss Function, Orthogonal Experiments, Parameter And Tolerance Design, Undefined. (1988). /paper/Taguchi-Techniques-For-Quality-Engineering%3A-Loss-Ross/bfc850abde17ffd7ffdf37bcaed67e44c9867c84 (accessed October 20, 2020).
- 35. A.M. Hassan, M. Almomani, T. Qasim, A. Ghaithan, Statistical analysis of some mechanical properties of friction stir welded aluminium matrix composite, International Journal of Experimental Design and Process Optimisation. 3 (2012) 91. https://doi.org/10.1504/IJEDPO.2012.045616.10.1504/IJEDPO.2012.045616
- 36. V. Chitturi, S.R. Pedapati, M. Awang, Investigation of Weld Zone and Fracture Surface of Friction Stir Lap Welded 5052 Aluminum Alloy and 304 Stainless Steel Joints, Coatings. 10 (2020) 1062. https://doi.org/10.3390/coatings10111062.10.3390/coatings10111062