References
- 1. Mehta, K.P.; Badheka, V.J. A review on dissimilar friction stir welding of copper to aluminum: Process, properties, and variants. Materials and Manufacturing Processes 2016, 31, 233-254.10.1080/10426914.2015.1025971
- 2. Sharma, N.; SIDDIQUEE, A.N. Friction stir welding of aluminum to copper—an overview. Transactions of Nonferrous Metals Society of China 2017, 27, 2113-2136.10.1016/S1003-6326(17)60238-3
- 3. Fonda, R.; Knipling, K. Texture development in friction stir welds. Science and Technology of Welding and Joining 2011, 16, 288-294.10.1179/1362171811Y.0000000010
- 4. Xue, P.; Ni, D.; Wang, D.; Xiao, B.; Ma, Z. Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar al–cu joints. Materials Science and Engineering: A 2011, 528, 4683-4689.10.1016/j.msea.2011.02.067
- 5. Threadgill, P.; Leonard, A.; Shercliff, H.; Withers, P. Friction stir welding of aluminium alloys. International Materials Reviews 2009, 54, 49-93.10.1179/174328009X411136
- 6. Thomas, W.; Nicholas, E.; Needham, J.; Murch, M.; Temple-Smith, P.; Dawes, C. Friction stir butt welding, international patent application no. PCT/GB92 Patent application 1991.
- 7. Thomas, W.; Nicholas, E. Friction stir welding for the transportation industries. Materials & Design 1997, 18, 269-273.10.1016/S0261-3069(97)00062-9
- 8. Fuse, K.; Badheka, V. Bobbin tool friction stir welding: A review. Science and Technology of Welding and Joining 2019, 24, 277-304.10.1080/13621718.2018.1553655
- 9. Wang, G.-Q.; Zhao, Y.-H.; Tang, Y.-Y. Research progress of bobbin tool friction stir welding of aluminum alloys: A review. Acta Metallurgica Sinica (English Letters), 1-17.
- 10. Tamadon, A.; Pons, D.J.; Clucas, D.; Sued, K. Internal material flow layers in AA6082-T6 butt-joints during bobbin friction stir welding. Metals 2019, 9, 1059.10.3390/met9101059
- 11. Tamadon, A.; Pons, D.; Sued, K.; Clucas, D. Thermomechanical grain refinement in AA6082-T6 thin plates under bobbin friction stir welding. Metals 2018, 8, 375.10.3390/met8060375
- 12. Tamadon, A.; Pons, D.J.; Clucas, D.; Sued, K. Texture evolution in aa6082-t6 BFSW welds: Optical microscopy and ebsd characterisation. Materials 2019, 12, 3215.10.3390/ma12193215680405131581446
- 13. Sued, M.; Tamadon, A.; Pons, D. Material flow visualization in bobbin friction stir welding by analogue model. Proceedings of Mechanical Engineering Research Day 2017, 2017, 1-2.
- 14. Tamadon, A.; Pons, D.; Sued, K.; Clucas, D. Development of metallographic etchants for the microstructure evolution of AA6082-T6 BFSW welds. Metals 2017, 7, 423.10.3390/met7100423
- 15. Tamadon, A.; Pons, D.; Sued, K.; Clucas, D. Formation mechanisms for entry and exit defects in bobbin friction stir welding. Metals 2018, 8, 33.10.3390/met8010033
- 16. Sued, M.K. Fixed bobbin friction stir welding of marine grade aluminium. Ph.D. Thesis, University of Canterbury, Christchurch, New Zealand, 2015.
- 17. Thomas, W.; Wiesner, C.; Marks, D.; Staines, D. Conventional and bobbin friction stir welding of 12% chromium alloy steel using composite refractory tool materials. Science and Technology of Welding and Joining 2009, 14, 247-253.10.1179/136217109X415893
- 18. Cui, L.; Yang, X.; Zhou, G.; Xu, X.; Shen, Z. Characteristics of defects and tensile behaviors on friction stir welded AA6061-T4 T-joints. Materials Science and Engineering: A 2012, 543, 58-68.10.1016/j.msea.2012.02.045
- 19. Pal, S.; Phaniraj, M.P. Determination of heat partition between tool and workpiece during FSW of SS 304 using 3D CFD modeling. Journal of Materials Processing Technology 2015, 222, 280-286.10.1016/j.jmatprotec.2015.03.015
- 20. Hilgert, J.; Dos Santos, J.; Huber, N. Shear layer modelling for bobbin tool friction stir welding. Science and Technology of Welding and Joining 2012, 17, 454-459.10.1179/1362171812Y.0000000034
- 21. Hilgert, J.; Schmidt, H.; Dos Santos, J.; Huber, N. Thermal models for bobbin tool friction stir welding. Journal of Materials Processing Technology 2011, 211, 197-204.10.1016/j.jmatprotec.2010.09.006
- 22. Tamadon, A.; Pons, D.; Sued, M.; Clucas, D.; Wong, E. In Analogue modelling of bobbin tool friction stir welding, Proceedings of the International Conference on Innovative Design and Manufacturing (ICIDM2016), Auckland, New Zealand, 24-26 January 2016, 2016; Auckland, New Zealand.
- 23. Tamadon, A.; Pons, D.; Sued, M.; Clucas, D.; Wong, E. In Preparation of plasticine material for analogue modelling, Proceedings of the International Conference on Innovative Design and Manufacturing (ICIDM2016), Auckland, New Zealand, 24-26 January 2016, 2016; Auckland, New Zealand.
- 24. Colligan, K. Material flow behavior during friction welding of aluminum. Welding Journal 1999, 75, 229-237.
- 25. Fonda, R.; Reynolds, A.; Feng, C.; Knipling, K.; Rowenhorst, D. Material flow in friction stir welds. Metallurgical and Materials Transactions A 2013, 44, 337-344.10.1007/s11661-012-1460-6
- 26. Hilgert, J.; Hütsch, L.L.; dos Santos, J.; Huber, N. In Material flow around a bobbin tool for friction stir welding, Excerpt from the Proceedings of the COMSOL Conference, 2010.
- 27. Liechty, B.; Webb, B. Modeling the frictional boundary condition in friction stir welding. International Journal of Machine Tools and Manufacture 2008, 48, 1474-1485.10.1016/j.ijmachtools.2008.04.005
- 28. He, X.; Gu, F.; Ball, A. A review of numerical analysis of friction stir welding. Progress in Materials Science 2014, 65, 1-66.10.1016/j.pmatsci.2014.03.003
- 29. Trueba, L.; Torres, M.A.; Johannes, L.B.; Rybicki, D. Process optimization in the self-reacting friction stir welding of aluminum 6061-T6. International Journal of Material Forming 2018, 11, 559-570.10.1007/s12289-017-1365-4
- 30. Shrivastava, A.; Pfefferkorn, F.E.; Duffie, N.A.; Ferrier, N.J.; Smith, C.B.; Malukhin, K.; Zinn, M. Physics-based process model approach for detecting discontinuity during friction stir welding. The International Journal of Advanced Manufacturing Technology 2015, 79, 605-614.10.1007/s00170-015-6868-x
- 31. Argesi, F.B.; Shamsipur, A.; Mirsalehi, S.E. Dissimilar joining of pure copper to aluminum alloy via friction stir welding. Acta Metallurgica Sinica (English Letters) 2018, 31, 1183-1196.10.1007/s40195-018-0741-5
- 32. Wahid, M.A.; Siddiquee, A.N.; Khan, Z.A.; Asjad, M. Friction stir welds of al alloy-cu: An investigation on effect of plunge depth. Archive of Mechanical Engineering 2016, 63, 619-634.10.1515/meceng-2016-0035
- 33. Moradi, M.M.; Aval, H.J.; Jamaati, R. Effect of tool pin geometry and weld pass number on microstructural, natural aging and mechanical behaviour of sic-incorporated dissimilar friction-stir-welded aluminium alloys. Sādhanā 2019, 44, 9.10.1007/s12046-018-0997-5
- 34. Gharavi, F.; Ebrahimzadeh, I.; Amini, K.; Sadeghi, B.; Dariya, P. Effect of welding heat input on the microstructure and mechanical properties of dissimilar friction stir-welded copper/brass lap joint. Materials Research 2019, 22.10.1590/1980-5373-mr-2018-0599
- 35. Ting, P.L.; Tsai, C.Y.; Chiu, L.H.; Cheng, C.P. In Tensile strength and metallurgical analysis in anodized al/cu joint using friction stir welding, Key Engineering Materials, 2015; Trans Tech Publ: pp 490-495.10.4028/www.scientific.net/KEM.656-657.490
- 36. Tamadon, A.; Pons, D.J.; Clucas, D. AFM characterization of stir-induced micro-flow features within the AA6082-t6 BFSW welds. Technologies 2019, 7, 80.10.3390/technologies7040080
- 37. Barcellona, A.; Buffa, G.; Fratini, L.; Palmeri, D. On microstructural phenomena occurring in friction stir welding of aluminium alloys. Journal of Materials Processing Technology 2006, 177, 340-343.10.1016/j.jmatprotec.2006.03.192
- 38. Fonda, R.; Bingert, J. Texture variations in an aluminum friction stir weld. Scripta Materialia 2007, 57, 1052-1055.10.1016/j.scriptamat.2007.06.068
- 39. Fonda, R.; Bingert, J.; Colligan, K. Development of grain structure during friction stir welding. Scripta Materialia 2004, 51, 243-248.10.1016/j.scriptamat.2004.04.017
- 40. Tamadon, A.; Pons, D.J.; Clucas, D. Structural anatomy of tunnel void defect in bobbin friction stir welding, elucidated by the analogue modelling. Applied System Innovation 2020, 3, 2.10.3390/asi3010002
- 41. Garg, A.; Raturi, M.; Bhattacharya, A. Influence of additional heating in friction stir welding of dissimilar aluminum alloys with different tool pin profiles. The International Journal of Advanced Manufacturing Technology, 1-21.
- 42. Wiedenhoft, A.G.; Amorim, H.J.d.; Rosendo, T.d.S.; Tier, M.A.D.; Reguly, A. Effect of heat input on the mechanical behaviour of Al-Cu FSW lap joints. Materials Research 2018, 21.10.1590/1980-5373-mr-2017-0983
- 43. Schneider, J.; Cobb, J.; Carpenter, J.S.; Mara, N.A. Maintaining nano-lamellar microstructure in friction stir welding (FSW) of accumulative roll bonded (arb) cu-nb nano-lamellar composites (nlc). Journal of Materials Science & Technology 2018, 34, 92-101.10.1016/j.jmst.2017.10.016
- 44. Saeid, T.; Abdollah-Zadeh, A.; Sazgari, B. Weldability and mechanical properties of dissimilar aluminum–copper lap joints made by friction stir welding. Journal of Alloys and Compounds 2010, 490, 652-655.10.1016/j.jallcom.2009.10.127
- 45. Muthu, M.F.X.; Jayabalan, V. Tool travel speed effects on the microstructure of friction stir welded aluminum–copper joints. Journal of Materials Processing Technology 2015, 217, 105-113.10.1016/j.jmatprotec.2014.11.007
- 46. Shah, L.; Othman, N.; Gerlich, A. Review of research progress on aluminium–magnesium dissimilar friction stir welding. Science and Technology of Welding and Joining 2018, 23, 256-270.10.1080/13621718.2017.1370193
- 47. Tamadon, A.; Baghestani, A.; Bajgholi, M.E. Influence of wc-based pin tool profile on microstructure and mechanical properties of AA1100 FSW welds. Technologies 2020, 8, 34.10.3390/technologies8020034
- 48. Sharma, N.; Siddiquee, A.N.; Khan, Z.A.; Mohammed, M.T. Material stirring during FSW of Al– Cu: Effect of pin profile. Materials and Manufacturing Processes 2018, 33, 786-794.10.1080/10426914.2017.1388526
- 49. Carlone, P.; Astarita, A.; Palazzo, G.S.; Paradiso, V.; Squillace, A. Microstructural aspects in Al– Cu dissimilar joining by FSW. The International Journal of Advanced Manufacturing Technology 2015, 79, 1109-1116.10.1007/s00170-015-6874-z
- 50. Xue, P.; Xiao, B.; Ni, D.; Ma, Z. Enhanced mechanical properties of friction stir welded dissimilar Al–Cu joint by intermetallic compounds. Materials Science and Engineering: A 2010, 527, 5723-5727.10.1016/j.msea.2010.05.061
- 51. Tamadon, A.; Pons, D.J.; Clucas, D. Microstructural study on thermomechanical behaviour of 6082-T6 aluminium BFSW weld plates. In Materials@UC 2018, Christchurch, New Zealand, 2018.
- 52. Tamadon, A.; Pons, D.J.; Clucas, D. Thermomechanical performance of bobbin tool design as an innovative variant for friction stir welding. In Manufacturing and Design Conference (MaD 2019) Auckland, New Zealand, 2019.
- 53. Tamadon, A. Characterization of flow-based bobbin friction stir welding process. Ph.D. Thesis, University of Canterbury, Christchurch, New Zealand, 2019.
- 54. Tamadon, A.; Pons, D.; Clucas, D. Analogue modelling of flow patterns in bobbin friction stir welding by the dark-field/bright-field illumination method. Advances in Materials Science 2020, 20, 56-70.10.2478/adms-2020-0003
- 55. Tamadon, A.; Pons, D.J.; Clucas, D. Flow-based anatomy of bobbin friction-stirred weld; AA6082-T6 aluminium plate and analogue plasticine model. Applied Mechanics 2020, 1, 3-19.10.3390/applmech1010002
- 56. Silva, B.H.; Zepon, G.; Bolfarini, C.; dos Santos, J.F. Refill friction stir spot welding of aa6082-t6 alloy: Hook defect formation and its influence on the mechanical properties and fracture behavior. Materials Science and Engineering: A 2020, 773, 138724.10.1016/j.msea.2019.138724