Application of the 3D Digital Image Correlation to the Analysis of Deformation of Joints Welded With the FSW Method After Shot Peening

Kubit, A.; Bucior, M.; Kluz, R.; Święch, Ł.; Ochał, K.

doi:10.2478/adms-2019-0022

Abstract

The three dimensional Digital Image Correlation (3D DIC) method is used for measurements of deformations and displacement in plane elements exposed to loading. The paper presents the experimental tests of an application of the ARAMIS system to the analysis of deformation of joints welded with the FSW method after shot peening treatment. The butt joints were made of 2024-T3 aluminum alloy sheets with the thickness of 1 mm, which next were peened with glass beads about granulation in range 500 ÷ 900 µm. Tests of residual stresses by X-ray diffraction were also carried out. The aim of the study was to analyze the impact of shot peening on the value of stresses and the location of deformations in butt joints.

References

1. Hatamleh O., Mishra R. S., Oliveras O.: Peening effects on mechanical properties in friction stir welded AA 2195 at elevated and cryogenic temperatures. Materials and Design, 30 (2009) 3165-3173.10.1016/j.matdes.2008.11.010
Search in Google Scholar Back to article
2. Xu Y., Bao R.: Residual stress determination in friction stir butt welded joints using a digital image correlation-aided slitting technique. Chinese Journal of Aeronautics, 30 (2017) 1258-1269.10.1016/j.cja.2016.11.003
Search in Google Scholar Back to article
3. Padhy, G. K., Wu, C. S., Gao, S.: Friction stir based welding and processing technologies-processes, parameters, microstructures and applications: A review. Journal of Materials Science & Technology, 34 (2018) 1-38.10.1016/j.jmst.2017.11.029
Search in Google Scholar Back to article
4. Tashkandi M. A., Al-Jarrah J. A.: Ibrahim M. Increasing of the mechanical properties of friction stir welded joints of 6061 aluminum alloy by introducing alumina particles. Advances in Materials Science, 17 (2017) 29-40.10.1515/adms-2017-0009
Search in Google Scholar Back to article
5. Guan W., Shen Y., Yan Y., Guo R., Zhang W.: Fabrication of ultra-thin copper foil pressure welding using FSW equipment. Journal of Materials Processing Tech., 251 (2018) 343-349.10.1016/j.jmatprotec.2017.08.022
Search in Google Scholar Back to article
6. Tuz L., Kołodziejczak P., Kolasa A.: Friction stir welding of AZ91 and AM-Lite magnesium alloys. Welding International, 27 (4) (2011) 265-267.10.1080/09507116.2011.600036
Search in Google Scholar Back to article
7. Iwaszko, J., Kudła, K., Fila, K., Strzelecka, M.: The Effect of Friction Stir Processing (FSP) on the Microstructure and Properties of AM60 Magnesium Alloy. Archives of Metallurgy and Materials, 61(3) (2016) 1555-1560.10.1515/amm-2016-0254
Search in Google Scholar Back to article
8. Emami S., Saeid T., Abdollah-zadeh A.: Effect of friction stir welding parameters on the microstructure and microtexture evolution of SAF 2205 stainless steel. Journal of Alloys and Compounds, 810 (2019) 1-7.10.1016/j.jallcom.2019.151797
Search in Google Scholar Back to article
9. Kasai H., Morisada Y., H. Fujii.: Dissimilar FSW of immiscible materials: Steel/magnesium. Materials Science & Engineering A, 624 (2015) 250-255.10.1016/j.msea.2014.11.060
Search in Google Scholar Back to article
10. Gao Y., Morisada Y., Fujii H., Liao J.: Dissimilar friction stir lap welding of magnesium to aluminum using plasma electrolytic oxidation interlayer. Material Science and Engineering A, 711(10) (2018) 109–118.10.1016/j.msea.2017.11.034
Search in Google Scholar Back to article
11. Sánchez Egea A.J., Rodríguez A., Celentano D., Calleja A., López de Lacalle L.N.: Joining metrics enhancement when combining FSW and ball-burnishing in a 2050 aluminium alloy. Surface & Coatings Technology, 367 (2019) 327-335.10.1016/j.surfcoat.2019.04.010
Search in Google Scholar Back to article
12. Mira-Aguiar T., Verdera D., Leitao C., Rodrigues D. M.: Tool assisted friction welding: A FSW related technique for the linear lap welding of very thin steel plates. Journal of Materials Processing Technology, 238 (2016) 73-80.10.1016/j.jmatprotec.2016.07.006
Search in Google Scholar Back to article
13. Xu W., Luo Y., Zhang W., Fu M.: Comparative study on local and global mechanical properties of bobbin tool and conventional friction stir welded 7085-T7452 aluminum thick plate. Journal of Materials Science & Technology, 34 (2018) 173-184.10.1016/j.jmst.2017.05.015
Search in Google Scholar Back to article
14. Wang Z. B., He Z. B., Fan X. B., Zhou L., Lin Y. L., Yuan S. J.: High temperature deformation behavior of friction stir welded 2024-T4 aluminum alloy sheets. Journal of Materials Processing Tech., 247 (2017) 184-191.10.1016/j.jmatprotec.2017.04.015
Search in Google Scholar Back to article
15. Saranath K. M., Ramji M.: Local zone wise elastic and plastic properties of electron beam welded Ti–6Al–4V alloy using digital image correlation technique: A comparative study between uniform stress and virtual fields method. Optics and Lasers in Engineering, 68 (2015) 222-234.10.1016/j.optlaseng.2015.01.005
Search in Google Scholar Back to article
16. Lusiak T., Knec M.: Use of ARAMIS for fatigue process control in the accelerated test for composites. Transportation Research Procedia, 35 (2018) 250-258.10.1016/j.trpro.2018.12.023
Search in Google Scholar Back to article
17. Zielecki W., Kubit A., Święch Ł.: Experimental analysis of strain field of adherent in adhesive joint subjected to peel. Measurements Automation Robotics, 2 (2013) 71-78.
Search in Google Scholar Back to article
18. Leităo C., Galvăo I., Leal R.M., Rodrigues D.M.: Determination of local constitutive properties of aluminium friction stir welds using digital image correlation. Materials and Design, 33 (2012) 69-74.10.1016/j.matdes.2011.07.009
Search in Google Scholar Back to article
19. Bonarski J. T.: Pomiar i wykorzystanie teksturowo – naprężeniowej charakterystyki mikrostruktury w diagnostyce materiałów. Instytut Metalurgii i Inżynierii Materiałowej. Kraków. (2013).
Search in Google Scholar Back to article
20. Skrzypek S. J.: Nowe możliwości pomiaru makronaprężeń własnych materiałów przy zastosowaniu dyfrakcji promieniowania X w geometrii stałego kąta padania. Wydawnictwo AGH. Kraków. (2002).
Search in Google Scholar Back to article
21. Kluz R., Kubit A.: Effect of friction stir welding on the load capacity of the joint 2016, Assembly Techniques and Technologies, 2 (2016) 31-34.
Search in Google Scholar Back to article
22. Kubit A., Kluz R., Ochałek K., Wydrzyński D., Trzepieciński T.: Friction stir welding of 2024-T3 Aluminium alloy sheet with sheet pre-heating. Materials and Technology, 52(3) (2018) 283–288.10.17222/mit.2017.084
Search in Google Scholar Back to article

Application of the 3D Digital Image Correlation to the Analysis of Deformation of Joints Welded With the FSW Method After Shot Peening

Abstract

Paradigm

My account