References
- 1. Wang K., Lu Q., Yi Y., Yi J., Niu B., Jiang Z., Ma J.: Effects of welding heat input on microstructure and electrochemical behavior of flux-cored arc-welded Q690 HSLA steel. Advances in Materials Science and Engineering (2018) 7484025.10.1155/2018/7484025
- 2. Ferreira M.L.R., Silva C.A.F.D., Pardal J.M., Tavares S.S.M.: Influence of shielding gas in FCAW process welding of UNS S31803 with E2209-T1/4 wire. Soldagem & Inspeção 23(3) (2018) 309-325.10.1590/0104-9224/si2303.02
- 3. Rodrigues L.A., Borges D.J., Baia P.E., Freitas E.N., Braga E.M.: Welding procedures influence analysis on the residual stress distribution and distortion of stiffened panels welded via robotized FCAW. Thin-Walled Structures 141 (2019) 175-183.10.1016/j.tws.2019.03.055
- 4. Urbański T., Graczyk T., Taraska M., Iwańkowicz R.: Assessment of technological usefulness of panel production line in shipbuilding process. Polish Maritime Research 25(s1) (2018) 134-144.10.2478/pomr-2018-0034
- 5. de Sousa Lins A., de Souza L.F.G., Fonseca M.C.: Characterization of mechanical properties and residual stress in API 5L X80 steel welded joints. Journal of Materials Engineering and Performance 27(1) (2018) 124-137.10.1007/s11665-017-3090-z
- 6. Mu W., Li Y., Cai Y., Wang M., Hua X.: The cryogenic low-cycle fatigue performance of 9% Ni steel joint made by flux cored arc welding. Materials Characterization 151 (2019) 27-37.10.1016/j.matchar.2019.02.039
- 7. Arun D., Ramkumar K.D., Vimala R.: Multi-pass arc welding techniques of 12 mm thick super-duplex stainless steel. Journal of Materials Processing Technology 271 (2019) 126-143.10.1016/j.jmatprotec.2019.03.031
- 8. Winczek J., Gucwa M., Mičian M., Koňár R., Parzych S.: The evaluation of the wear mechanism of high-carbon hardfacing layers. Archives of Metallurgy and Materials 64(3) (2019) 1111-1115.10.24425/amm.2019.129502
- 9. Świerczyńska A., Fydrych D., Rogalski G.: Diffusible hydrogen management in underwater wet self-shielded flux cored arc welding. International Journal of Hydrogen Energy 42(38) (2017) 24532-24540.10.1016/j.ijhydene.2017.07.225
- 10. Yang Q., Han Y., Jia C., Wu J., Dong S., Wu C.: Impeding effect of bubbles on metal transfer in underwater wet FCAW. Journal of Manufacturing Processes 45 (2019) 682-689.10.1016/j.jmapro.2019.08.013
- 11. Wang J., Sun Q., Pan Z., Yang J., Feng J.: Effects of welding speed on bubble dynamics and process stability in mechanical constraint-assisted underwater wet welding of steel sheets. Journal of Materials Processing Technology 264 (2019) 389-401.10.1016/j.jmatprotec.2018.09.022
- 12. Guo N., Zhang X., Xu C., Chen H., Fu Y., Cheng Q.: Effect of parameters change on the weld appearance in stainless steel underwater wet welding with flux-cored wire. Metals 9(9) (2019) 951.10.3390/met9090951
- 13. Pitrun M., Nolan D.U., Dunne D.: Diffusible hydrogen content in rutile flux-cored arc welds as a function of the welding parameters. Welding in the World 48(1-2) (2004) 2-13.10.1007/BF03266408
- 14. Schaupp T., Rhode M., Kannengiesser T.: Influence of welding parameters on diffusible hydrogen content in high-strength steel welds using modified spray arc process. Welding in the World 62(1) (2018) 9-18.10.1007/s40194-017-0535-9
- 15. Bracarense A.Q., Souza R., Costa M.C.M., Faria P.E., Liu S.: Welding current effect on diffusible hydrogen content in flux cored arc weld metal. Journal of the Brazilian Society of Mechanical Sciences 24(4) (2002) 278-285.10.1590/S0100-73862002000400005
- 16. Lee M., Cho K., Kim Y., Kang N.: Effect of martensite on cold cracking in 600-MPa grade flux-cored arc weld metals using the Y-groove test. Welding in the World 59(5) (2015) 647-654.10.1007/s40194-015-0240-5
- 17. Alipooramirabad H., Paradowska A., Ghomashchi R., Reid M.: Investigating the effects of welding process on residual stresses, microstructure and mechanical properties in HSLA steel welds. Journal of Manufacturing Processes 28 (2017) 70-81.10.1016/j.jmapro.2017.04.030
- 18. Harwig D.D., Longenecker D.P., Cruz J.H.: Effects of welding parameters and electrode atmospheric exposure on the diffusible hydrogen content of gas shielded flux cored arc welds. Welding Journal 78 (1999) 314-321.
- 19. Fydrych D., Świerczyńska A., Tomków J.: Diffusible hydrogen control in flux cored arc welding process. Key Engineering Materials 597 (2014) 171-178.10.4028/www.scientific.net/KEM.597.171
- 20. Świerczyńska A., Fydrych D., Landowski M., Rogalski G., Łabanowski J.: Hydrogen embrittlement of X2CrNiMoCuN25-6-3 super duplex stainless steel welded joints under cathodic protection. Construction and Building Materials 238 (2020) 117697.10.1016/j.conbuildmat.2019.117697
- 21. Świerczyńska A., Fydrych D., Łabanowski J.: The effect of welding conditions on diffusible hydrogen content in deposited metal. Solid State Phenomena 183 (2012) 193-200.10.4028/www.scientific.net/SSP.183.193
- 22. Fydrych D., Łabanowski J.: An experimental study of high-hydrogen welding processes. Revista de Metalurgia 51(4) (2015) 10-3989.10.3989/revmetalm.055
- 23. Reisgen U., Willms K., Wieland S.: Influence of storage conditions on aluminum 4043A welding wires. Welding Journal 96(6) (2017) 220-227.
- 24. Tomków J., Fydrych D., Rogalski G., Łabanowski J.: Effect of the welding environment and storage time of electrodes on the diffusible hydrogen content in deposited metal. Revista de Metalurgia 55 (2019) e140.
- 25. Barrera O., Bombac D., Chen Y., Daff T.D., Galindo-Nava E., Gong P., Liverani C.: Understanding and mitigating hydrogen embrittlement of steels: a review of experimental, modelling and design progress from atomistic to continuum. Journal of Materials Science 53(9) (2018) 6251-6290.10.1007/s10853-017-1978-5
- 26. Wasim M., Djukic M.B.: Hydrogen embrittlement of low carbon structural steel at macro-, micro-and nano-levels. International Journal of Hydrogen Energy (2020) (In press).10.1016/j.ijhydene.2019.11.070
- 27. Fu H., Wang W., Chen X., Pia G., Li J.: Fractal and multifractal analysis of fracture surfaces caused by hydrogen embrittlement in high-Mn twinning/transformation-induced plasticity steels. Applied Surface Science 470 (2019) 870-881.10.1016/j.apsusc.2018.11.179
- 28. Li L., Song B., Cai Z., Liu Z., Cui X.: Effect of vanadium content on hydrogen diffusion behaviors and hydrogen induced ductility loss of X80 pipeline steel. Materials Science and Engineering: A 742 (2019) 712-721.10.1016/j.msea.2018.09.048
- 29. Xia D.H., Song S., Qin Z., Hu W., Behnamian Y.: Electrochemical probes and sensors designed for time-dependent atmospheric corrosion monitoring: fundamentals, progress, and challenges. Journal of The Electrochemical Society 167(3) (2020) 037513.10.1149/2.0132003JES
- 30. Morcillo M., Díaz I., Cano H., Chico B., De la Fuente D.: Atmospheric corrosion of weathering steels. Overview for engineers. Part I: Basic concepts. Construction and Building Materials 213 (2019) 723-737.10.1016/j.conbuildmat.2019.03.334
- 31. Li X., Wang X., Wang L., Sun Y., Zhang B., Li H., ..., Hou B.: Corrosion behavior of Q235 steel in atmospheres containing SO2 and NaCl. Journal of Materials Engineering and Performance 28(4) (2019) 2327-2334.10.1007/s11665-019-03984-6
- 32. Łatka L., Chicot D., Cattini A., Pawłowski L., Ambroziak A.: Modeling of elastic modulus and hardness determination by indentation of porous yttria stabilized zirconia coatings. Surface and Coatings Technology 220 (2013) 131-139.10.1016/j.surfcoat.2012.07.025
- 33. Chmielewski T., Siwek P., Chmielewski M., Piątkowska A., Grabias A., Golański D.: Structure and selected properties of arc sprayed coatings containing in-situ fabricated Fe-Al intermetallic phases. Metals 8(12) (2018) 1059.10.3390/met8121059
- 34. Szala M., Walczak, M., Pasierbiewicz K., Kamiński, M.: Cavitation erosion and sliding wear mechanisms of AlTiN and TiAlN films deposited on stainless steel Substrate. Coatings 9(5) (2019) 340.10.3390/coatings9050340
- 35. Winnicki M., Piwowarczyk T., Małachowska A.: General description of cold sprayed coatings formation and of their properties. Bulletin of the Polish Academy of Sciences. Technical Sciences 66(3) (2018) 301-310.
- 36. Deilami K., Kamruzzaman M., Liu Y.: Urban heat island effect: A systematic review of spatio-temporal factors, data, methods, and mitigation measures. International Journal of Applied Earth Observation and Geoinformation 67 (2018) 30-42.10.1016/j.jag.2017.12.009
- 37. Zhao C., Jensen J., Weng Q., Weaver R.: A geographically weighted regression analysis of the underlying factors related to the surface urban heat island phenomenon. Remote Sensing 10(9) (2018) 1428.10.3390/rs10091428
- 38. Theeuwes N.E., Steeneveld G.J., Ronda R.J., Holtslag A.A.: A diagnostic equation for the daily maximum urban heat island effect for cities in northwestern Europe. International Journal of Climatology 37(1) (2017) 443-454.10.1002/joc.4717
- 39. Guo N., Xu C., Du Y., Chen H., Fu Y., Feng J.: Influence of calcium fluoride on underwater wet welding process stability. Welding in the World 63(1) (2019) 107-116.10.1007/s40194-018-0642-2
- 40. Ma C., Wang Z., Behnamian Y., Gao Z., Wu Z., Qin Z., Xia D.H.: Measuring atmospheric corrosion with electrochemical noise: A review of contemporary methods. Measurement 138 (2019) 54-79.10.1016/j.measurement.2019.02.027