References
- 1. Tsuji N., Tanaka S., Takasugi T.: Effects of combined plasma – carburizing and shot – peening on fatigue and wear properties of Ti-6Al-4V alloy. Surface & Coatings Technology, 203 (2009) 1400-1405.
- 2. Lindemann J., Buque C., Appel F.: Effect of shot peening on fatigue performance of a lamellar titanium aluminide alloy. Acta Materialia, 54 (2006) 1155-1164.
- 3. Altenberger I.: Deep rolling – the past, the present and the future. [In:] Schulze V., Niku-Lari A.: Shot peening and other mechanical surface treatments. Proceedings of the 9th International Conference on Shot Peening, Paris: 6-9 September (2005) 144-155.
- 4. Łabanowski J., Ossowska A.: Properties of duplex stainless steel surface after burnishing process. Solid State Phenomena, 165 (2010) 118-123.
- 5. Zaleski R., Zaleski K., Gorgol M., Wiertel M.: Positron annihilation study of aluminum, titanium, and iron alloys surface after shot peening. Applied Physics A. Materials Science & processing, 120 (2015) 551-559.
- 6. Wiertel M., Zaleski K., Gorgol M., Skoczylas A., Zaleski R.: Impact of impulse shot peening parameters on properties of stainless steel surface. Acta Physica Polonica A, 132(5) (2017) 1611-1615.
- 7. Zaleski K.: The effect of shot peening on fatigue life of parts made of titanium alloy Ti-6Al-4V. Eksploatacja i Niezawodność – Maintenance and Reliability, 4 (2009) 65-71.
- 8. Ivanova S.G., Biederman R.R., Sisson R.D.: Investigation of fatigue crack initiation in Ti-6Al-4V during tensil – tensil fatigue. Journal of Materials Engineering and Performance, 11(2) (2002) 226-231.
- 9. Jiang X.P., Man C-S., Shepard M.J., Zhai T.: Effects of shot – peening and re – shot – peening on four – point bend behavior of Ti-6Al-4V. Materials Science and Engineering A, 468-470 (2007) 137-143.
- 10. Yang Q., Zhou W., Niu Z., Zhang X., Wang Q., Fu X., Chen G., Li Z.: Effect of different surface asperities and surface hardness induced by shot – peening on the fretting wear behavior of Ti-6Al-4V. Surface & Coatings Technology, 349 (2018) 1098-1106.
- 11. Zhang X., Liu D.: Effect of shot peening on fretting fatigue of Ti811 alloy at elevated temperature. International Journal of Fatigue, 31 (2009) 881-893.
- 12. Zebrowski R., Walczak M., Klepka T., Pasierbiewicz K.: Effect of the shot peening on surface properties of Ti-6Al-4V alloy produced by means of DMLS technology. Eksploatacja i Niezawodność – Maintenance and Reliability, 21(1) (2019) 46-53.
- 13. Maawad E., Bromeier H.-G., Wagner L., Sano Y., Genzel Ch.: Investigation on the surface snd near – surface characteristics of Ti-2.5Cu after various mechanical surface treatments. Surface & Coatings Technology, 205 (2011) 3644-3650.
- 14. Schuh A., Zeller C., Holmarth U., Kachler W., Wilcke G., Zeiler G., Eigenmann B., Bigoney J.: Deep rolling of titanium rods for application in modular total hip arthroplasty. Journal of Biomedical Materials Research Part B – Applied Biomaterials, 81(2) (2007) 330-335.
- 15. Rotella G., Rinaldi S., Filice L.: Roller burnishing of Ti6Al4V under different cooling/lubrication conditions and tool design: effects on surface integrity. The International Journal of Advanced Manufacturing Technology, (2019) 1-10 https://doi.org/10.1007/s00170-019-04631-z.
- 16. Pohrelyuk I.M., Sheykin S.E., Padgurskas J., Lavrys S.M.: Wear resistance of two-phase titanium alloy after deformation-diffusion treatment. Tribology International, 127 (2018) 404-411.
- 17. Maheshwari A.S., Gawande R.R.: Influence of specially designed high-stiffness ball burnishing tool on surface quality of titanium alloy. Materials Today: Proceedings, 4 (2017) 1405-1413.
- 18. Revankar G.D., Shetty R., Rao S.S., Gaitonde V.N.: Wear resistance enhancement of titanium alloy (Ti-6Al-4V) by burnishing process. Journal of Materials Research and Technology, 6(1) (2017) 13-32.
- 19. Kulakowska A., Kukielka L., Kukielka K., Malag L., Patyk R., Bohdal L.: Possibility of steering of products surface layer properties in burnishing rolling process. Applied Mechanics and Materials, 474 (2014) 442-447.
- 20. Maximov J.T., Duncheva G.V., Anchev A.P., Ichkova M.D.: Slide burnishing – review and prospects. The International Journal of Advanced Manufacturing Technology, 104 (2019) 785-801.
- 21. Dzionk S., Scibiorski B., Przybylski W.: Surface texture analysis of hardened shafts after ceramic ball burnishing. Materials, 12(2) 204 (2019).
- 22. Tobola D., Brostow W., Czechowski K., Rusek P.: Improvement of wear resistance of some cold working tool steel. Wear 382-383 (2017) 29-39.
- 23. Konefal K., Korzynski M., Byczkowska Z., Korzynska K.: Improved corrosion resistance of stainless steel X6CrNiMoTi17-12-2 by sidle diamond burnishing. Journal of Materials Processing Technology, 213 (2013) 1997-2004.
- 24. Korzynski M., Zarski T.: Slide diamond burnishing influence on of surface stereometric structure of an AZ91 alloy. Surface & Coatings Technology, 307 (2016) 590-595.
- 25. Zaleski K.: A study on the properties of surface-active fluids used in burnishing and shot peening processes. Advances in Science and Technology Research Journal, 10(31) (2016) 235-239.
- 26. Shchukin E.D., The influence of surface-active media on the mechanical properties of materials. Advances in Colloid an Interface Science, 123(126) (2006) 33-47.