References
- 1. Kondej A., Baranowski M.: Eddy current method in the study of welds - assessment of the depth of dents weld face. [in Polish]. Przegląd Spawalnictwa 3 (2014), 51-54.
- 2. Kondej A., Baranowski M.: Examination of the welded joints of martensitic steel with the use of eddy current method. [in Polish]. Przegląd Spawalnictwa 6 (2014), 12-16.
- 3. Babul T., Jończyk S., Samborski T., Włodarczyk S.: The use of virotest method for gears inspection. [in Polish]. 40 National Conference, PTBNiDT SIMP, Warsaw, 2011, 41.
- 4. Kondej A., Baranowski M., Niedźwiedzki K., Jończyk. S., Szczepański A.: Automatic stand for NDT inspection using eddy current method. [in Polish]. Inżynieria Powierzchni 1 (2014), 57-62.
- 5. Babul T., Jończyk S., Samborski T., Włodarczyk S.: Detection of local inhomogeneity of the material and microstructure changes using eddy current method. [in Polish]. Przegląd Spawalnictwa 12 (2013), 25-28.
- 6. Babul T., Jończyk S., Samborski T.: Assessment of local defects in the microstructure - correlation measurements of eddy current and microhardness methods. [in Polish]. Przegląd Spawalnictwa 3 (2014), 11-17.
- 7. Dybiec M., Nakonieczny A., Włodarczyk S.: Practical application of eddy current method for estimation of value and direction of stresses. NDT in antiquity and nowadays skills - applications - innovations, Hellenic Society of NDT, Chania - Crete, Greece, 2003, 109-113.
- 8. Babul T., Dybiec Cz., Jończyk S., Włodarczyk S.: Eddy current assessment of the stress caused by the penetration of hydrogen. [in Polish]. Inżynieria Powierzchni 2 (2013), 59-65.
- 9. Trojanowski J., Nakonieczny A., Babul T., Wierzchoń T.: Nitriding and carbonitriding processes glow in the automotive industry - examples of applications. [in Polish]. Inżynieria Powierzchni 4 (2007), 3-8.
- 10. Jończyk S., Samborski T., Włodarczyk S.: The applicability of the eddy current method for quality control of nitrided layers. [in Polish]. Inżynieria Powierzchni 2 (2014), 52-58.