Have a personal or library account? Click to login
Reliable Tilt of Objects Subjected to Rectification and Located in Mining Areas Cover

Reliable Tilt of Objects Subjected to Rectification and Located in Mining Areas

Architecture, Civil Engineering, Environment
Volume 16 (2023): Issue 4 (December 2023)
By: Krzysztof Gromysz  
Open Access
|Dec 2023

Figures & Tables

Figure 1.

A single-storey building of a church: a) plan, b) section view, c) building during rectification, d) view of east side after rectification; based on [19]
A single-storey building of a church: a) plan, b) section view, c) building during rectification, d) view of east side after rectification; based on [19]

Figure 2.

Plan and cross-section of a single-storey building with a usable attic and a garage, 1 – axis of rotation, 2 – “zero” point, 3 – tearing plane
Plan and cross-section of a single-storey building with a usable attic and a garage, 1 – axis of rotation, 2 – “zero” point, 3 – tearing plane

Figure 3.

Rectified building with a usable attic and a garage: a) view of the southern side, b) western wall
Rectified building with a usable attic and a garage: a) view of the southern side, b) western wall

Figure 4.

Two-storey building, 1 – the level of building tearing
Two-storey building, 1 – the level of building tearing

Figure 5.

North-western corner of the two-storey building: a) prior to rectification, b) during rectification, c) after rectification with noticeable displacement uobj = 1312 mm
North-western corner of the two-storey building: a) prior to rectification, b) during rectification, c) after rectification with noticeable displacement uobj = 1312 mm

Figure 6.

11-storey building: a) ground floor plan, b) northern elevation; 1 – axis of rotation, 2 – fixed point, 3 – incision plane
11-storey building: a) ground floor plan, b) northern elevation; 1 – axis of rotation, 2 – fixed point, 3 – incision plane

Figure 7.

11-storey building during rectification: a) jacks installed in the wall, b) strengthening of the elevator shaft, whose deflection was regarded as reliable
11-storey building during rectification: a) jacks installed in the wall, b) strengthening of the elevator shaft, whose deflection was regarded as reliable

Figure 8.

A complex of buildings connected functionally with a patio
A complex of buildings connected functionally with a patio

Figure 9.

Rectified complex of buildings: a) view from the southeastern side, b) temporary supports during rectification
Rectified complex of buildings: a) view from the southeastern side, b) temporary supports during rectification

Figure 10.

Rectified historic timber building of museum: a) ground floor plan with determined values uobj, b) cross-section, c) works related to the new foundation; based on [20]
Rectified historic timber building of museum: a) ground floor plan with determined values uobj, b) cross-section, c) works related to the new foundation; based on [20]

Figure 11.

Rectified bell tower: a) vertical section, b) floor plan with determined values uobj, c) reinforced concrete ring beam supported on piles, based on [21]
Rectified bell tower: a) vertical section, b) floor plan with determined values uobj, c) reinforced concrete ring beam supported on piles, based on [21]

Figure 12.

Tower during works of a) rectification, b) replacement of roof sheathing
Tower during works of a) rectification, b) replacement of roof sheathing

Figure 13.

Rectified tank with avolume of 950 m3: a) facility plan with determined values uobj, b) cross-section, c) void between the foundation and the ground; based on [22]
Rectified tank with avolume of 950 m3: a) facility plan with determined values uobj, b) cross-section, c) void between the foundation and the ground; based on [22]
DOI: https://doi.org/10.2478/acee-2023-0052 | Journal eISSN: 2720-6947 | Journal ISSN: 1899-0142
Journal RSS Feed
Language: English
Page range: 79 - 92
Submitted on: Apr 28, 2023
Accepted on: Jun 8, 2023
Published on: Dec 31, 2023
Published by: Silesian University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Vertical deflection of a building,
Rectification,
Non-uniform elevation,
Slope of mining area,
Non-uniform depression of mining area
Related subjects:
Architecture and design,
Architecture,
Architects, buildings

© 2023 Krzysztof Gromysz, published by Silesian University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Previous articleVolume 16 (2023): Issue 4 (December 2023)Next article