Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Results of Bonferroni's post-hoc test for OF content in MMWSF during biological stabilisation (p < 0_05); results important in statistical terms are marked in red
| week | 0 | 1 | 2 | 3 | 4 |
|---|---|---|---|---|---|
| 1 | 1.000 | ||||
| 2 | 0.0006 | 0.0001 | |||
| 3 | 0.0002 | 0.00006 | 1.000 | ||
| 4 | 0.000008 | 0.000003 | 0.01 | 0.165 |
Results of Bonferroni's post-hoc test for AT4 value of MMWSF during biological stabilisation (p < 0_05); results important in statistical terms are marked in red
| week | 0 | 1 | 2 | 3 | 4 |
|---|---|---|---|---|---|
| 1 | 0.0001 | ||||
| 2 | 0.004 | 0.14 | |||
| 3 | 0.000001 | 0.004 | 0.0001 | ||
| 4 | 0.00000 | 0.0000 | 0.0000 | 0.00001 |
Results of Pearson's correlation (p < 0_05) for individual parameters of feed to bioreactor and conditions present in the bioreactor; results important in statistical terms are marked in red
| organic fraction [%] | AT4 [mgO2/gDM] | loss on ignition [% DM] | waste humidity [%] | humidity in the bioreactor [%] | |
|---|---|---|---|---|---|
| AT4 [mgO2/g DM] | 0.73 | ||||
| loss on ignition [% DM] | 0.63 | 0.7 | |||
| waste humidity [%] | 0.5 | 0.83 | 0.44 | ||
| humidity in the bioreactor [%] | 0.16 | 0.24 | −0.43 | 0.34 | |
| temperature in the bioreactor [°C] | 0.3 | 0.2 | −0.4 | 0.25 | 0.95 |
Results of Bonferroni's post-hoc test for LOI of MMWSF during biological stabilisation (p < 0_05); results important in statistical terms are marked in red
| week | 0 | 1 | 2 | 3 | 4 |
|---|---|---|---|---|---|
| 1 | 0.0001 | ||||
| 2 | 0.00005 | 1.00 | |||
| 3 | 0.00004 | 1.00 | 1.00 | ||
| 4 | 0.00001 | 0.67 | 1.00 | 1.00 |