References
- Zhou, H., et al. (2014). An overview of characteristics of municipal solid waste fuel in China: physical, chemical composition and heating value. Renewable and sustainable energy reviews. 36, 107–122.
- Pan, A., L. Yu, and Q. Yang (2019). Characteristics and forecasting of municipal solid waste generation in China. Sustainability, 11(5), 1433.
- Mian, M.M., et al. (2017). Municipal solid waste management in China: a comparative analysis. Journal of material cycles and waste management, 19(3), 1127–1135.
- Ji, G., et al. (2017). Enhanced hydrogen production from sawdust decomposition using hybrid-functional Ni-CaO-Ca2SiO4 materials. Environmental Science & Technology, 51(19), 11484–11492.
- Raheem, A., et al. (2018). Catalytic gasification of algal biomass for hydrogen-rich gas production: parametric optimization via central composite design. Energy Conversion and Management, 158, 235–245.
- Rada, E.C., et al. (2018). Dioxin contamination after a hypothetical accidental fire in baled municipal solid waste storage. environment, 17, 21.
- Khandelwal, H., et al. (2019). Application of life cycle assessment in municipal solid waste management: A worldwide critical review. Journal of Cleaner Production, 209, 630–654.
- Cocarta, D., et al. (2009). A contribution for a correct vision of health impact from municipal solid waste treatments. Environmental technology, 30(9), 963–968.
- Giusti, L. (2009). A review of waste management practices and their impact on human health. Waste management, 29(8), 2227–2239.
- Kanchanabhan, T., et al. (2011). Application of geographical information system (GIS) in optimisation of waste collection for Alandur Municipality in South Chennai, India. International Journal of Environment and Waste Management, 7(3–4), 395–410.
- Young, G.C. (2010). Municipal solid waste to energy conversion processes: economic, technical, and renewable comparisons. John Wiley & Sons.
- McGowan, T. (2010). Municipal Solid Waste to Energy Conversion Processes: Economic, Technical and Renewable Comparisons. Chemical Engineering. 117(12), 8–10.
- Chen, L., et al. (2018). Co-pyrolysis kinetics and behaviors of kitchen waste and chlorella vulgaris using thermogravimetric analyzer and fixed bed reactor. Energy Conversion and Management, 165, 45–52.
- Van Nguyen, Q., et al. (2021). Co-pyrolysis of coffee-grounds and waste polystyrene foam: Synergistic effect and product characteristics analysis. 292, 120375.
- Lopez, G., et al. (2017). Thermochemical routes for the valorization of waste polyolefinic plastics to produce fuels and chemicals. A review. Renewable and Sustainable Energy Reviews. 73, 346–368.
- Lopez, G., et al. (2018). Recent advances in the gasification of waste plastics. A critical overview. Renewable and Sustainable Energy Reviews, 82, 576–596.
- Plastics. Plastics – the Facts 2016: An Analysis of European Plastics Production, demand and waste data. Brussels – Belgium. 2021 [cited 2020 August 17]; Available from:
https://plasticseurope.org/wp-content/uploads/2021/10/2016-Plastic-the-facts.pdf . - Kai, X., et al. (2019). TG-FTIR-MS study of synergistic effects during co-pyrolysis of corn stalk and high-density polyethylene (HDPE). Energy Conversion and Management, 181, 202–213.
- Sharuddin, S.D.A., et al. (2016). A review on pyrolysis of plastic wastes. Energy conversion and management, 115, 308–326.
- Kunwar, B., et al. (2016). Plastics to fuel: a review. Renewable and Sustainable Energy Reviews. 54, 421–428.
- Abnisa, F., et al. (2013). Co-pyrolysis of palm shell and polystyrene waste mixtures to synthesis liquid fuel. Fuel. 108, 311–318.
- Brebu, M., et al. (2010). Co-pyrolysis of pine cone with synthetic polymers. Fuel. 89(8), 1911–1918.
- Özsin, G. and A.E. Pütün (2017). Insights into pyrolysis and co-pyrolysis of biomass and polystyrene: Thermochemical behaviors, kinetics and evolved gas analysis. Energy Conversion and Management, 149, 675–685.
- Liu, Y., J. Qian, and J. Wang (2000). Pyrolysis of polystyrene waste in a fluidized-bed reactor to obtain styrene monomer and gasoline fraction. Fuel Processing Technology, 63(1), 45–55.
- Jin, Y. (2002). Study on MSW combustion characteristics and a new CFB incineration technology. Hangzhou: Zhejiang University.
- Luo, S., et al. (2010). Effect of particle size on pyrolysis of single-component municipal solid waste in fixed bed reactor. International journal of hydrogen energy. 35(1), 93–97.
- Zhang, Q., et al. (2012). Gasification of municipal solid waste in the Plasma Gasification Melting process. Applied Energy. 90(1), 106–112.
- Lopez-Velazquez, M., et al. (2013). Pyrolysis of orange waste: a thermo-kinetic study. Journal of Analytical and Applied Pyrolysis, 99, 170–177.
- Chen, S., et al. (2015). TGA pyrolysis and gasification of combustible municipal solid waste. Journal of the energy institute, 88(3), 332–343.
- Meng, A., et al. (2015). Pyrolysis and gasification of typical components in wastes with macro-TGA. Waste management, 46, 247–256.
- Zheng, J., et al. (2009). Pyrolysis characteristics of organic components of municipal solid waste at high heating rates. Waste Management, 29(3), 1089–1094.
- Dawei, A., et al. (2006). Low temperature pyrolysis of municipal solid waste: influence of pyrolysis temperature on the characteristics of solid fuel. International journal of energy research, 30(5), 349–357.
- Singh, S., C. Wu, and P.T. Williams (2012). Pyrolysis of waste materials using TGA-MS and TGA-FTIR as complementary characterisation techniques. Journal of Analytical and Applied Pyrolysis, 94, 99–107.
- Zhao, M., et al. (2019). Iso-conversional kinetics of low-lipid micro-algae gasification by air. Journal of Cleaner Production, 207, 618–629.
- De Caprariis, B., et al. (2012). Double-Gaussian distributed activation energy model for coal devolatilization. Energy & Fuels. 26(10), 6153–6159.
- Sørum, L., M. Grønli, and J. Hustad (2001). Pyrolysis characteristics and kinetics of municipal solid wastes. Fuel. 80(9), 1217–1227.
- Gunasee, S.D., et al. (2016). Pyrolysis and combustion of municipal solid wastes: Evaluation of synergistic effects using TGA-MS. Journal of Analytical and Applied Pyrolysis, 121, 50–61.
- CE. Research helps Europe advance towards circular economy. 2021 [cited 2021 August 12]; Available from:
https://ec.europa.eu/jrc/en/news/research-helps-europe-advance-towards-circular-economy . - Yong, Z.J., et al. (2019). Sustainable waste-to-energy development in Malaysia: Appraisal of environmental, financial, and public issues related with energy recovery from municipal solid waste. Processes, 7(10), 676.
- UN. United Nations Economic and Social Commissions (UNESCAP) (2016). Visualization of Interlinkages for SDG 7; UNESCAP: New York, NY, USA. (accessed on 20 December 2021). Available. 2021; Available from:
https://www.unescap.org/sites/default/files/Visualisation%20of%20interlinkages%20for%20SDG%207.pdf . - UN. GOAL 7: Affordable ad Clean Energy; UN Environment: Nairobi, Kenyan, 2019. 2021 [cited 2021 December 25]; Available from:
https://www.unep.org/explore-topics/sustainable-development-goals/why-do-sustainable-development-goals-matter/goal-7 . - Zhao, M., N.H. Florin, and A.T. Harris (2009). The influence of supported Ni catalysts on the product gas distribution and H2 yield during cellulose pyrolysis. Applied Catalysis B: Environmental. 92(1–2), 185–193.
- Zhao, M., N.H. Florin, and A.T. Harris (2010). Mesoporous supported cobalt catalysts for enhanced hydrogen production during cellulose decomposition. Applied Catalysis B: Environmental, 97(1–2), 142–150.
- Abd Aziz, M.F.S. and Z.A. Zakaria (2018). Oil Palm Biomass and Its Kinetic Transformation Properties, in Biosynthetic Technology and Environmental Challenges. Springer, 73–87.
- Mishra, R.K. and K. Mohanty (2018). Pyrolysis kinetics and thermal behavior of waste sawdust biomass using thermogravimetric analysis. Bioresource technology, 251, 63–74.
- Zhang, Q., et al. (2017). Experimental study on copyrolysis and gasification of biomass with deoiled asphalt. Energy, 134, 301–310.
- Özsin, G. and A.E. Pütün (2019). TGA/MS/FT-IR study for kinetic evaluation and evolved gas analysis of a biomass/PVC co-pyrolysis process. Energy conversion and management, 182, 143–153.
- Huang, Z., Q.-q. Ye, and L.-j. Teng (2015). A comparison study on thermal decomposition behavior of poly (l-lactide) with different kinetic models. Journal of Thermal Analysis and Calorimetry, 119(3).
- Jain, A.A., A. Mehra, and V.V. Ranade (2016). Processing of TGA data: Analysis of isoconversional and model fitting methods. Fuel, 165, 490–498.
- Ali, M., et al. (2018). The effect of hydrolysis on combustion characteristics of sewage sludge and leaching behavior of heavy metals. Environmental technology, 39(20), 2632–2640.
- Zhou, H., et al. (2015). Thermogravimetric characteristics of typical municipal solid waste fractions during co-pyrolysis. Waste management, 38, 194–200.
- Figueira, C.E., P.F. Moreira Jr, and R. (2015). Giudici, Thermogravimetric analysis of the gasification of microalgae Chlorella vulgaris. Bio resource technology, 198, 717–724.
- López-González, D., et al. (2014). Comparison of the steam gasification performance of three species of microalgae by thermogravimetric–mass spectrometric analysis. Fuel, 134, 1–10.
- Ridout, A.J., M. Carrier, and J. Görgens (2015). Fast pyrolysis of low and high ash paper waste sludge: Influence of reactor temperature and pellet size. Journal of analytical and applied pyrolysis, 111, 64–75.
- Garcia-Maraver, A., et al. (2015). Determination and comparison of combustion kinetics parameters of agricultural biomass from olive trees. Renewable Energy, 83, 897–904.
- Cheng, K., W.T. Winter, and A.J. Stipanovic (2012). A modulated-TGA approach to the kinetics of lignocellulosic biomass pyrolysis/combustion. Polymer degradation and stability, 97(9), 1606–1615.
- Khoso, S., Ansari, A. A., Wagan, F. H., (2014). Investigative constrution of buildings using baked clay post reinforced beam panels. Journal of Architecture Civil Engineering Environment ACEE, 7(4), 57–66. ISSN: 1899-0142
- Khoso, S., Naqash, M. T., Sher, S., & Saeed, Z. (2018). An experimental study on fiberly reinforced concrete using polypropylene fibre with virgin and recycled road aggregate. Journal of Architecture Civil Engineering Environment, 11, 73–80.
- Khoso, S., Raad, J., & Parvin, A. (2019). Experimental investigation on the properties of recycled concrete using hybrid fibers. Open Journal of Composite Materials, 9(02), 183.
- A Soltani, S Khoso, MA Keerio, A Formisano, (2019) “Assessment of Physical and Mechanical Properties of Concrete Produced from Various Portland Cement Brands” Open Journal of Composite Materials 9(04), 327.