The influence of iron powder content on the fresh and hardened properties of mortar
References
- Association Française de Normalisation [AFNOR] (1999). Méthodes d’essai des mortiers pour maçonnerie. Partie 7: détermination de la teneur en air du mortier frais (NF EN 1015-7) [Methods of test for mortar for masonry. Part 7: determination of air content of fresh mortar]. AFNOR.
- Association Française de Normalisation [AFNOR] (2007). Méthodes d’essai des mortiers pour maçonnerie. Partie 6: détermination de la masse volumique apparente du mortier frais (NF EN 1015-6/A1) [Methods of test for mortar for masonry. Part 6: determination of bulk density of fresh mortar]. AFNOR.
- Association Française de Normalisation [AFNOR] (2012a). Ciment. Partie 1: Compostition, spécifications et critères de conformité des ciments courants (NF EN 197-1) [Cement. Part 1: composition, specifications and conformity criteria for common cements]. AFNOR.
- Association Française de Normalisation [AFNOR] (2012b). Essais pour béton durci. Partie 3: résistance à la compression des éprouvettes (NF EN 12390-3) [Tests for hardened concrete. Part 3: compressive strength of the specimens]. AFNOR.
- Association Française de Normalisation [AFNOR] (2012c). Essais pour déterminer les caractéristiques géométriques des granulats. Partie 1: détermination de la granularité. Analyse granulométrique par tamisage (NF EN 933-1) [Tests for geometrical properties of aggregates. Part 1: determination of particle size distribution. Sieving method]. AFNOR.
- Association Française de Normalisation [AFNOR] (2015). Essais pour déterminer les caractéristiques géométriques des granulats. Partie 8: évaluation des fines. Équivalent de sable (NF EN 933-8+A1) [Tests for geometrical properties of aggregates. Part 8: assessment of fines. Sand equivalent test]. AFNOR.
- Association Française de Normalisation [AFNOR] (2017a). Bétons. Mesure du temps d’écoulement des bétons et des mortiers au maniabilimètre (NF P 18-452) [Concretes. Measuring the flow time of concretes and mortars using a workabilitymeter]. AFNOR.
- Association Française de Normalisation [AFNOR] (2017b). Essais pour béton durci. Partie 1: Forme, dimensions et autres exigences aux éprouvettes et aux moules (NF EN 12390-1) [Testing hardened concrete. Part 1: shape, dimensions and other requirements for specimens and moulds]. AFNOR.
- Association Française de Normalisation [AFNOR] (2022a). Béton. Spécification, performance, production et conformité. Complément national à la norme (NF EN 206+A2) [Concrete. Specification, performance, production and conformity. National addition to the standard]. AFNOR.
- Association Française de Normalisation [AFNOR] (2022b). Essais pour déterminer les caractéristiques mécaniques et physiques des granulats. Partie 7: détermination de la masse volumique réelle du filler. Méthode au picnomètre (NF EN 1097-7) [Tests for mechanical and physical properties of aggregates. Part 7: determination of the particle density of filler. Pyknometer method]. AFNOR.
- Belebchouche, C., Temami, O., Khouadjia, M. L. K., Hamlaoui, S., Berkouche, A., & Chouadra, T. (2024). Recycling of brick and road demolition waste in the production of concrete. Science, Engineering and Technology, 4(2), 14‒23.
https://doi.org/10.54327/set2024/v4.i2.154 - Bogue, R. H. (1947). Chemistry of Portland cement. Reinhold.
- Cui, L., Chen, P., Wang, L., Xu, Y., & Wang, H. (2022). Reutilizing waste iron tailing powders as filler in mortar to realize cement reduction and strength enhancement. Materials, 15(2), 541.
https://doi.org/10.3390/ma15020541 - Cui, L., Xu, Y., Wang, L., Ying, P., & Wang, H. (2024). Investigating the hydration characteristics of iron tailings powder cement mortar produced by the mortar substitution method. Journal of Building Engineering, 81, 108100.
https://doi.org/10.1016/j.jobe.2023.108100 - Dias, R., Bigotto, S., Benjamim, D. U., Chotolli, D. L., & de Souza, M. V. (2020). Concrete mixture with the use of iron powder waste for coarse aggregate doping. International Journal of Multidisciplinary Sciences and Engineering, 11(2), 18‒24.
https://www.ijmse.org/Volume11/Issue2/paper3_11_2.pdf - European Committee for Standardization [CEN] (2016). Methods of testing cement. Part 3: Determination of setting times and soundness (EN 196-3).
- Fahad, B. M., & Jassim, K. S. (2020). Behaviour of cement mortar containing iron waste powder as a substitute for sand. IOP Conference Series: Materials Science and Engineering, 737(1), 012064.
https://doi.org/10.1088/1757-899X/737/1/012064 - Giovanni, D., Rumbyarso, Y. P. A., & Siagian, B. (2024). Analysis of concrete compressive strength with partial substitution of iron powder waste as fine aggregate. International Journal of Multi Science, 4(02), 122‒129.
- Han, F., Zhang, H., Liu, J., & Song, S. (2022). Influence of iron tailing powder on properties of concrete with fly ash. Powder Technology, 398, 117132.
https://doi.org/10.1016/j.powtec.2022.117132 - Harabi, H., Khouadjia, M. L. K., Bensalem, S., Isleem, H. F., & Khishe, M. (2024). Effect of waste paper aggregate and polyethylene terephthalate on mortar performance. Scientific Reports, 14(1), 29588.
https://doi.org/10.1038/s41598-024-80914-0 - Harrison, R. M. (Ed.). (2023). Pollution: causes, effects, and control. Royal Society of Chemistry.
- Khouadjia, M. L. K., Bensalem, S., Belebchouche, C., Boumaza, A., Hamlaoui, S., & Czarnecki, S. (2025). Sustainable geopolymer tuff composites utilizing iron powder waste: rheological and mechanical performance evaluation. Sustainability, 17(3), 1240.
https://doi.org/10.3390/su17031240 - Khouadjia, M. L. K., Bensalem, S., Belkadi, A. A., Kessal, O., & Sebti, M. A. (2023). Influence of the shape and content of steel and aluminum fibers from industrial lathe wastes on the physico-mechanical and rheological behavior of concrete. Journal of Applied Engineering Sciences, 13(26), 207‒214.
https://doi.org/10.2478/jaes-2023-0026 - Kong, L., Xie, S., Wang, C., & Wang, L. (2023). Effect of iron tailings as fine aggregate and mineral admixture on strength and microstructure of cement mortar. International Journal of Concrete Structures and Materials, 17(1), 24.
https://doi.org/10.1186/s40069-023-00584-6 - Krikar, M., Noori, G., & Ibrahim, H. H. (2018). Mechanical properties of concrete using iron waste as a partial replacement of sand. Eurasian Journal of Science and Engineering, 3(3), 75‒82.
https://doi.org/10.23918/eajse.v3i3p75 - Largeau, M. A. (2018). Effect of iron powder partially used as Portland cement replacement on the structural properties of concrete (doctoral dissertation). Jomo Kenyatta University of Agriculture and Technology.
- Largeau, M. A., Mutuku, R., & Thuo, J. (2018). Effect of iron powder (Fe2O3) on strength, workability, and porosity of the binary blended concrete. Open Journal of Civil Engineering, 8(04), 411.
https://doi.org/10.4236/ojce.2018.84029 - Lu, Y., Huang, J., & Gao, Y. (2020). Study on the preparation and properties of modified functional mortar mixed with reduced iron powder. IOP Conference Series: Materials Science and Engineering, 735(1), 012018.
https://doi.org/10.1088/1757-899X/735/1/012018 - Małek, M., Jackowski, M., Łasica, W., Kadela, M., & Wachowski, M. (2021). Mechanical and material properties of mortar reinforced with glass fiber: An experimental study. Materials, 14(3), 698.
https://doi.org/10.3390/ma14030698 - Miah, M. J., Ali, M. K., Paul, S. C., John Babafemi, A., Kong, S. Y., & Šavija, B. (2020). Effect of recycled iron powder as fine aggregate on the mechanical, durability, and high temperature behavior of mortars. Materials, 13(5), 1168.
https://doi.org/10.3390/ma13051168 - Miah, M. J., Miah, M. S., Paul, S. C., Kong, S. Y., Babafemi, A. J., Ali, M. K., & Patoary, M. M. H. (2021). Waste iron powder is used as aggregate and as a binder in mortar production. Magazine of Civil Engineering, 108(8), 10810.
https://doi.org/10.34910/MCE.108.10 - Ruidong, W., Yu, S., Juanhong, L., Linian, C., Guangtian, Z., & Yueyue, Z. (2021). Effect of iron tailings and slag powders on workability and mechanical properties of concrete. Frontiers in Materials, 8, 723119.
https://doi.org/10.3389/fmats.2021.723119 - Tao, L. I., & Dang, B. (2016). Experimental study on the compressive strength of iron tailings concrete with different replacement types. Hebei Journal of Industrial Science and Technology, 33, 240‒245.
- Tayeh, B. A., & Al Saffar, D. M. (2018). Utilization of waste iron powder as fine aggregate in cement mortar. Journal of Engineering Research and Technology, 5(2), 22‒27.
- Thakur, A., Singh, D., & Singh, A. (2019). Enhancement in properties of cement mortar by using iron-based material: a critical review. International Journal for Research in Applied Science & Engineering Technology, 7(12), 689‒691.
Language: English
Page range: 198 - 217
Submitted on: Apr 14, 2025
Accepted on: Jun 9, 2025
Published on: Jun 30, 2025
Published by: Warsaw University of Life Sciences - SGGW Press
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2025 Bariza Boukni, Sara Bensalem, Mohamed Lyes Kamel Khouadjia, Oussama Temami, Salim Hamlaoui, Cherif Belebchouche, published by Warsaw University of Life Sciences - SGGW Press
This work is licensed under the Creative Commons Attribution-NonCommercial 4.0 License.