References
- K.J. Åström, T. Hägglund, “The future of PID control”, Control Engineering Practice, Vol. 9, N° 11, 2001, pp. 1163-1175.10.1016/S0967-0661(01)00062-4
- S. Boyd, M. Hast, K.J. Astrom,”MIMO PID tuning via iterated LMI restriction”, International Journal of Robust and Nonlinear Control, 2015, doi: 10.1002/rnc.3376.10.1002/rnc.3376
- M.A. Ahmad, S. Azuma, T. Sugie “Performance analysis of model-free PID tuning of MIMO systems based on simultaneous perturbation stochastic approximation”, Expert Systems with Applications, Vol. 41, N° 14, 2014, pp. 6361-6370.10.1016/j.eswa.2014.03.055
- R. C. Panda, “Introduction to PID controllers – Theory, tuning and application to frontier areas”, InTech, Rijeka, 2012.10.5772/2422
- R.K. Sahu, S. Panda, U.K. Rout, “DE optimized parallel 2-DOF PID controller for load frequency control of power system with governor dead-band nonlinearity”, International Journal of Electrical Power & Energy Systems, Vol. 49, July 2013, pp. 19-33.10.1016/j.ijepes.2012.12.009
- H. Shabani, B. Vahidi, M. Ebrahimpour,”A robust PID controller based on imperialist competitive algorithm for load-frequency control of power systems”, ISA Transactions, Vol. 52, No. 1, 2013, pp. 88-95.10.1016/j.isatra.2012.09.00823084664
- E.S. Ali, S.M. Abd-Elazim, “BFOA based of PID controller for two area Load Frequency Control with nonlinearities”, International Journal of Electrical Power & Energy Systems, Vol. 51, October 2013, pp. 224-231.10.1016/j.ijepes.2013.02.030
- K. H. Johansson, “The quadruple-tank process: A multivariable laboratory process with an adjustable zero”, IEEE Transactions on Control Systems Technology, Vol. 8, N° 3, 2000, pp. 456-465.10.1109/87.845876
- Z.M. Yusoff, Z. Muhammad, M.H.F. Rahiman, M.N. Taib, “Real time steam temperature regulation using self-tuning fuzzy PID controller on hydro-diffusion essential oil extraction system”, International Journal on Smart Sensing and Intelligent Systems, Vol. 6, N° 5, 2013, pp. 2055-2074.10.21307/ijssis-2017-626
- E.E. Balla and M.F. Rahmat, “System identification modelling and IMC based PID control of impressed current cathodic protection systems”, International Journal on Smart Sensing and Intelligent Systems, Vol. 6, N° 5, 2013, pp. 2055-2074.10.21307/ijssis-2017-627
- M.H.M. Shah, M.F. Rahmat, K.A. Danapalasingam and N.A. Wahab, “PLC based adaptive fuzzy PID speed control of DC belt conveyor system”, International Journal on Smart Sensing and Intelligent Systems, Vol. 6, N° 3, 2013, pp. 1133-1152.10.21307/ijssis-2017-583
- J.L. Guzmán, T. Hägglund, M. Veronesi, A. Visioli, Performance indices for feedforward control, Journal of Process Control, Vol. 26, N° 3, 2015, pp. 26-34.10.1016/j.jprocont.2014.12.004
- S. Zhao, W. Xue, and Z. Gao, “Achieving minimum settling time subject to undershoot constraint in systems with one or two real right half plane zeros”, Journal of Dynamic Systems, Measurement, and Control, Vol. 134, N°3, 034505, 2013, doi:10.1115/1.4023211.10.1115/1.4023211
- G. Zames, B.A. Francis, “Feedback, minimax sensitivity, and optimal robustness”, IEEE Transactions on Automatic Control, Vol. 28, N° 5, 1981, pp. 585-601.10.1109/TAC.1983.1103275
- K.H. Johansson, “Interaction bounds in multivariable control systems”, Automatica, Vol. 38, N° 6, 2002, pp. 1045-1051.10.1016/S0005-1098(01)00285-0
- R. Schmid, L. Ntogramatzidis, “A unified method for the design of non-overshooting linear multivariable state-feedback tracking controllers”, Automatica, Vol. 46, N° 2, 2010, pp. 312-321.10.1016/j.automatica.2009.11.018
- Z. Shen, S. Li, L. Donghai, G. Zhiqiang, “Tracking and disturbance rejection in nonminimum phase systems”, 33rd Chinese Control Conference (CCC), Nanjing, China, pp. 3834-3839, July 2014.
- R. Schmid, A. Pandey, “The role of non-minimum phase zeros in the transient response - multivariable systems”, 50thIEEE Conference on Decision and Control and European Control Conference (CDC-ECC), Orlando, U.S.A, pp. 473-474, December 2011.10.1109/CDC.2011.6160546
- J. C. Geromel, C. C. de Souza, and R. E. Skelton, “LMI numerical solution for output feedback stabilization”, In Proceedings of the American Control Conference, Tapei, pp. 40 - 44, 1994.
- Y.Y. Cao, Y.X. Sun, J. Lam, “Simultaneous stabilization via static output feedback and state feedback”, IEEE Transactions on Automatic Control, Vol. 44, N° 6, 1999, pp. 12771282.10.1109/9.769390
- H. Mkaouar, O. Boubaker, “Chaos synchronization via Linear Matrix Inequalities: A comparative analysis”, International Journal on Smart Sensing And Intelligent Systems, Vol. 7, N° 2, 2014, pp. 553-583.10.21307/ijssis-2017-670
- Y.Y. Cao, J. Lam, Y.X. Sun, “Static output feedback stabilization: An ILMI approach”, Automatica, Vol. 34, N° 12, 1998, pp. 1641-1645.10.1016/S0005-1098(98)80021-6
- M. Soliman, A. L. Elshafei, F. Bendary, W. Mansour, “Robust decentralized PID-based power system stabilizer design using an ILMI approach”, Electric Power Systems Research, Vol. 80, N° 8, 2010, pp. 1488-1497.10.1016/j.epsr.2010.06.008
- F. Zheng, Q.G. Wang, T.H. Lee, “On the design of multivariable PID controllers via LMI approach”, Automatica, Vol. 38, N° 3, 2002, pp. 517-526.10.1016/S0005-1098(01)00237-0
- C. Lin, Q.G. Wang, T. H. Lee, “An improvement on multivariable PID controller design via iterative LMI approach”, Automatica, Vol. 40, N° 3, 2004, pp. 519-525.10.1016/j.automatica.2003.10.008
- Y. He, Q.G. Wang, “An improved ILMI method for static output feedback control with application to multivariable PID control”, IEEE Transactions on Automatic Control, Vol. 51, N° 10, 2006, pp. 1678-1683.10.1109/TAC.2006.883029
- W. Belhaj, O. Boubaker, “On MIMO PID control of the Quadruple-tank process via ILMI approaches : Minimum and non-minimum phase system case studies”, 10thInternational IFAC Symposium on Dynamics and Control of Process Systems, Mumbai, India, pp. 481486, December 2013.
- E.P. Gatzke, E.S. Meadows, C. Wang, F.J. Doyle, “Model based of a four-tank system”, Computers and Chemical Engineering, Vol. 24, N° 2-7, 2000, pp. 1503-1509.10.1016/S0098-1354(00)00555-X
- M. Dominguez, J.J. Fuertes, M.A. Prada, S. Alonso, A. Moran, “Remote laboratory of a quadruple tank process for learning in control engineering using different industrial controllers”, Computer Application in Engineering Education, Vol. 22, N° 3, 2004, pp. 375386.10.1002/cae.20562
- J. Lofberg, “Yalmip: a toolbox for modeling and optimization in MATLAB”, IEEE International Symposium in Computer Aided Control Systems Design, Taipei, pp. 284-289, September 2004.
- F. El Haoussi, E. H. Tissir, F. Tadeo, A. Hmamed, “Delay-dependent stabilisation of systems with time-delayed state and control : Application to a quadruple-tank process”, International Journal of Systems Science, Vol. 42, N° 1, 2011, pp. 41-49.10.1080/00207720902990054
- J.L. Guzman, T. Hagglund, M. Veronesi, A. Visioli, “Performances indices for feedforward control “, Journal of Process Control, Vol. 26, 2014, pp. 26-34.10.1016/j.jprocont.2014.12.004
- H.O. Bansal, R. Sharma, P. Shreeraman, “PID controller tuning techniques: a review”, Journal of Control Engineering Technology, Vol. 2, N° 4, 2012, pp. 168-76.
- R. A. Krohling, J.P. Rey, “Design of optimal disturbance rejection PID controllers using genetic algorithms”, IEEE Transactions on Evolutionary computation, Vol. 5, N° 1, 2001, pp. 78-82.10.1109/4235.910467