A Method To Design Pid Controllers Using Frit-Pso

Takehito Azuma

doi:10.21307/ijssis-2017-834

.blurhash-client-img { display: none !important; }

A Method To Design Pid Controllers Using Frit-Pso

International Journal on Smart Sensing and Intelligent Systems

Volume 8 (2015): Issue 4 (January 2015)

By: Takehito Azuma

Open Access

|Dec 2015

Abstract

This paper proposes the Fictitious Reference Iterative Tuning-Particle Swarm Optimization (FRIT-PSO) method to design PID controllers for feedback control systems. The proposed method is an offline PID parameter tuning method. Moreover it is not necessary to derive any mathematical models of objected control systems. The proposed method is demonstrated by comparing with the FRIT method in numerical examples and an experiment

References

P. Kundur, “Power system stability and control”, McGraw-Hill, 1993.
Search in Google Scholar Back to article
A. J. Wood, B. F. Wollenberg and G. B. Sheble, “Power generation, operation, and control”, Woley, 2013
Search in Google Scholar Back to article
A. Visioli, “Practical PID Control”, Springer, 2006.
Search in Google Scholar Back to article
K. L. Chien, J. A. Hrones and J. B. Reswick, “On the automatic control of generalized passive systems”, Transaction of American Society of Mechanical Enginnering, Vol. 74, pp. 827-834, 1952.10.1115/1.4015724
Search in Google Scholar Back to article
G. H. Cohn and G. A. Coon, “Theoretical consideration of related control”, Transaction of American Society of Mechanical Enginnering, Vol. 75, pp. 827-834, 1953.10.1115/1.4015451
Search in Google Scholar Back to article
T. Kailath, “Linear Systems”, Prentice-Hall., 1979.
Search in Google Scholar Back to article
T. Kitamori, “A method of control system design based upon partial knowledge about controlled processess”, Transactions of the Society of Instrument and Control Engineers, Vol. 15, No. 4, pp. 549-555, 1979.10.9746/sicetr1965.15.549
Search in Google Scholar Back to article
S. Bennett, “Development of the PID controller,” IEEE Control Systems, Vol. 13, No.6, pp. 58-62, 1993.10.1109/37.248006
Search in Google Scholar Back to article
K. J. Astrom and T. Hagglund, “PID controllers: theory, design, and tuning”, Research Triangle, 1995.
Search in Google Scholar Back to article
G. F. Franklin, J. D. Powell and A. Emami-Naeni, “Feedback control of dynamical systems”, Prentice-Hall, 2002.
Search in Google Scholar Back to article
T. Hagglund and K. J. Astrom, “Revisiting the Ziegler–Nichols step response method for PID control”, Journal of Process Control, Vol. 14, pp. 635–650, 2004.10.1016/j.jprocont.2004.01.002
Search in Google Scholar Back to article
M. W. Foley, R. H. Julien and B. R. Copeland, “A comparison of PID controller tuning methods”, The Canadian Journal of Chemical Engineering, Vol. 83, No. 4, pp. 712-722, 2008.10.1002/cjce.5450830412
Search in Google Scholar Back to article
S. C. Mukhopadhyay, T. Ohji, M. Iwahara, S. Yamada and F. Matsumura, “Disturbance attenuation and h-infinity control on repulsive type magnetic bearing”, IEEE Transactions on Magnetics, Vol. 33, No. 5, pp. 4233-4235, 1997.
Search in Google Scholar Back to article
S. C. Mukhopadhyay, T. Ohji, M. Iwahara, S. Yamada and F. Matsumura, “Permanent magnet configuration in repulsive type magnetic bearing for improved disturbance attenuation characteristics”, COMPEL-International Journal for Computation and Mathematics in Electrical and Electronics Engineering, Vol. 17, pp. 290-295, 1998.10.1108/03321649810208274
Search in Google Scholar Back to article
S. C. Mukhopadhyay, T. Ohji, M. Iwahara, S. Yamada and F. Matsumura, “Design and development of a low cost repulsive type magnetic bearing and its h-infinity control”, Journal of Non-linear Electromagnetic Systems, IOS Press, 13, 741-744, 1998.
Search in Google Scholar Back to article
K. J. Astrom, H. Panagopoulos and T. Hagglund, “Design of PI controllers based on non-convex optimization”, Automatica, Vol. 34, No. 5, pp. 585-601, 1998.10.1016/S0005-1098(98)00011-9
Search in Google Scholar Back to article
M. Hast, K. Astrom, M. Hast, K. J.Astrom, B. Bernhardsson and S. Boyd, “Design by convex-concave optimization”, Proceedings of 2013 European Control Conference, pp. 44604465, 2013.
Search in Google Scholar Back to article
H. Hjalmarsson, M. Gevers, S. Gunnarsson and O. Lequin, “Iterative feedback tuning: theory and applications”, IEEE Control Systems, Vol. 18, No. 4, pp. 26-41, 1998.10.1109/37.710876
Search in Google Scholar Back to article
G. O. Guardabassi and S. M. Savaresi, “Virtual reference direct design method: an off-line approach to data-based control system design”, IEEE Transaction on Automatic Contol, Vol. 45, No. 5, pp. 954-959, 2000.10.1109/9.855559
Search in Google Scholar Back to article
H. Hjalmarsson, “Iterative feedback tuning – an overview”, International Journal of Adaptive Control and Signal Processing, Vol. 16, pp. 373-395, 2002.10.1002/acs.714
Search in Google Scholar Back to article
M. C. Campi, A. Lecchini and S. M. Savaresi, “Virtual reference feedback tuning(VRFT): a direct method for the design of feedback controllers”, Automatica, Vol. 38, pp. 1337-1346, 2002.
Search in Google Scholar Back to article
M. C. Campi and S. Savaresi, “Direct nonlinear control design: the virtual reference feedback tuning(VRFT) approach”, IEEE Transaction on Automatic Contol, Vol. 51, No. 1, pp. 14-27, 2006 .10.1109/TAC.2005.861689
Search in Google Scholar Back to article
S. Arimoto, S. Kawamura and F. Miyazaki, “Bettering operation of robots by learning”, Journal of Robotic Systems, Vol. 1, No. 2, pp. 123-140, 1984.10.1002/rob.4620010203
Search in Google Scholar Back to article
J. Moon, T. Doh and M. J. Chung, “An iterative learning control design approach for networked control systems with data dropouts”, International Journal of Robust and Nonlinear Control, Vol. 34, No. 8, pp. 1001-1004, 1998.
Search in Google Scholar Back to article
H. Ahn, Y. Q. Chen and K. L. Moore, “Iterative learning control: brief survey and categorization”, IEEE Transactions on Systems, Man, and Cybernetics, Part C: Applications and Reviews, Vol. 37, No. 6, pp. 1099 – 1121, 2007.
Search in Google Scholar Back to article
D. P. Bertsekus, “Nonlinear Programming”, Athena Scientific, 1999.
Search in Google Scholar Back to article
D. P. Bertsekus, “Dynamic programming and optimal control”, Third edition, Athena Scientific, 2005
Search in Google Scholar Back to article
S. Soma, O. Kaneko and T. Fujii, “A new approach to parameter tuning of controllers by using one-shot experimental data – a proposal of fictitious reference iterative tuning”, Transactions of the institute of systems, control and information engineers, Vol. 17, No. 12, pp. 528-536, 2004.10.5687/iscie.17.528
Search in Google Scholar Back to article
O. Kaneko, Y. Yamashina and S. Yamamoto, “Fictitious reference tuning of the feedforward controller in a two-degree-of-freedom control system”, SICE Journal of Control Measurement and System Integration, Vol. 4, No. 1, pp. 55-62, 2011.10.9746/jcmsi.4.55
Search in Google Scholar Back to article
J. Kennedy and R. Eberhart, “Particle swarm optimization”, Proceedings of IEEE international conference on neural networks, Vol. 4, pp. 1942-1948, 1995.
Search in Google Scholar Back to article
T. Azuma and S. Saijo, “Development and experiment of networked control systems with congestion control”, In S. C. Mukhopadhyay(Eds.), Smart Sensors and Sensing Technology,Lecture Notes in Electrical Engineering, pp. 15-27, Springer-Verlag, 2008.10.1007/978-3-540-79590-2_2
Search in Google Scholar Back to article
T. Azuma, “Design and experimental verification of state predictive LQG controllers for networked control systems”, International Journal on Smart Sensing and Intelligent Systems, Vol. 7, No. 3, pp. 1201-1220, 2014.
Search in Google Scholar Back to article
M. Banzi, Getting Started with Arduino, Maker Media, Inc., 2011.
Search in Google Scholar Back to article
G. Ueno, K. Yasuda and N. Iwasaki, “Robust-adaptive particle swarm optimization”, Proceedings of IEEE International Conference on Systems, Man and Cybernetics, Vol. 4, pp. 3915-3920, 2005.
Search in Google Scholar Back to article