Wen. Fangyu, Ren. Zunsong, and Sun. Shouguang, “ANSYS/DYNA-based study on wheelrail dynamics of high-speed wheel-turnout system”, Journal of the China Railway Society, vol. 36, no. 3, pp. 14-18, 2014.
F. Braghin, S. Bruni and F. Resta, “Wear of railway wheel profiles: a comparison between experimental results and a mathematical model”, Veh Syst Dyn, Vol. 37, No.1, pp. 478–489,2002.10.1080/00423114.2002.11666256
Tao. Gongquan,Wang. Hengyu, Zhao. Xin, Du. Xing, Wen. Zefeng, Guo, Jun, Zhu, Minhao, “Research on wheel tread damage mechanism based on interaction of wheel and rail”, Journal of Mechanical Engineering, Vol.49,No.18,pp. 23-29,September 20, 2013.10.3901/JME.2013.18.023
Butt, W.A, “Observer based dynamic surface control of a hypersonic flight vehicle”, International Journal on Smart Sensing and Intelligent Systems, vol.6, No.2, 2013, pp. 664-688.10.21307/ijssis-2017-560
Aldair, A.A, Wang, W.J, “Design an intelligent controller for full vehicle nonlinear active suspension systems”, International Journal on Smart Sensing and Intelligent Systems, vol.4, No.2, 2011, pp.224-243.10.21307/ijssis-2017-437
Pålsson, Björn A, “Optimisation of railway crossing geometry considering a representative set of wheel profiles”, Vehicle System Dynamics, Vol.53, No.2, pp. 274-301, February, 2015.10.1080/00423114.2014.998242
S. Bruni, A. Collina and R. Corradi, “Numerical modeling of railway run ability and ballast settlement in railroad bridges”, in: Proceedings of the EURODYN International Conference, 2002.
Zboinski, K., and Dusza, M, “Bifurcation Approach to the Influence of Rolling Radius Modeling and Rail Inclination on the Stability of Railway Vehicles in a Curved Track”, Veh Syst Dyn, Vol.46, No. 8,2008, pp.1023-1037.10.1080/00423110802037255
Zboinski, K., and Dusza, M, “Extended Study of Railway Vehicle Lateral Stability in a Curved Track”, Veh Syst Dyn, Vol.49, No.5, 2011, pp.789-810.10.1080/00423111003770447
Wickens, A. H, “Comparative Stability of Bogie Vehicles With Passive And Active Guidance as Influenced by Friction and Traction”, Veh Syst Dyn, Vol.47, No.9, 2009, pp.11371146.10.1080/00423110802495800
Kim, P, Seok, J, “Bifurcation Analysis on the Hunting Behavior of a Dual-Bogie Railway Vehicle Using the Method of Multiple Scales”, J. Sound Vib, Vol.32, No.9, 2010, pp.4017-4039.10.1016/j.jsv.2010.03.024
Polach,O, “Influence of Wheel/Rail Contact Geometry on the Behavior of a Railway Vehicle at Stability Limit”, Proceedings of the ENOC-2005, Eindhoven University of Technology, The Netherlands 2005, 7-12Aug, pp.2203-2210.
T.Ohji, S.C.Mukhopadhyay, M.Iwahara and S.Yamada, “Permanent Magnet Bearings for Horizontal and Veryical Shaft Machines - A Comparative Study”, Journal of Applied Physics, Vol. 85, No. 8, pp 4648-4650, April 1999.10.1063/1.370436
Kaiser, I, Popp, K, “Interaction of Elastic Wheel set and Elastic Rails: Modeling and Simulation”, Veh Syst Dyn, Vol.44, No.5, 2006, pp.932-939.10.1080/00423110600907675
T.Ohji, S.C.Mukhopadhyay, M.Iwahara and S.Yamada, “Performance of Repulsive Type Magnetic Bearing System under Nonuniform Magnetization of Permanent Magnet”, IEEE Transactions on Magnetics, Vol. 36, No. 5, pp. 3696-3698, September 2000.
Luo. Feng,“A comprehensive survey of vision based vehicle intelligent front light system”, International Journal on Smart Sensing and Intelligent Systems, vol.5, No.2, 2014, pp.701-723.10.21307/ijssis-2017-677