Review on Modeling and Controller Design of Hydraulic Actuator Systems
References
- N. Ishak, M. Tajjudin, “Real-time Application of Self-tuning PID in Electro-hydraulic Actuator,”IEEE International Conference on Control System, Computing and Engineering (ICCSCE), pp. 364–368, 2011.
- T. G. Ling, M. F. Rahmat, and A. R. Husain, “ANFIS Modeling and Direct ANFIS Inverse Control of an Electro-Hydraulic Actuator System,”8th IEEE Conference on Industrial Electronics and Applications (ICIEA), pp. 370–375, 2013.
- H. Shakouri G. and H. R. Radmanesh, “Identification of a continuous time nonlinear state space model for the external power system dynamic equivalent by neural networks,”International Journal of Electrical Power & Energy Systems, vol. 31, no. 7–8, pp. 334–344, 2009.
- J. Reedy and G. T.-C. Chiu, “Adaptive robust motion control of single-rod hydraulic actuators: theory and experiments,” IEEE/ASME Trans. Mechatronics, vol. 5, no. 1, pp. 79–91, 2000.
- A. G. Loukianov, E. Sanchez, and C. Lizalde, “Force tracking neural block control for an electro- hydraulic actuator via second-order sliding mode,”International Journal of Robust and Nonlinear Control, vol. 18, pp. 319–332, 2008.
- a. Alleyne and J. K. Hedrick, “Nonlinear adaptive control of active suspensions,” IEEE Transactions on Control Systems Technology, vol. 3, pp. 94-101, 1995
- C. Guan and S. Pan, “Nonlinear Adaptive Robust Control of Single-Rod Electro-Hydraulic Actuator With Unknown Nonlinear Parameters,” IEEE Transactions on Control Systems Technology, , vol. 16, pp. 434-445, 2008
- B. Yao, J. Zhang, D. Koehler, and J. Litherland, “High performance swing velocity tracking control of hydraulic excavators,” American Control Conference, vol.2, pp. 818-822, 1998.
- J. W. Raade and H. Kazerooni, “Analysis and Design of a Novel Hydraulic Power Source for Mobile Robots,” Automation Science and Engineering, IEEE Transactions on, vol. 2, pp. 226-232, 2005.
- D. Sha, V. B. Bajic, and H. Yang, “New model and sliding mode control of hydraulic elevator velocity tracking system,” Simulation Practice and Theory, vol. 9, pp. 365-385, 2002.
- H. A. Mintsa and C. Belleau, “Feedback Linearization-Based Position Control of an Electrohydraulic Servo System With Supply Pressure Uncertainty,”Control Systems Technology, IEEE Transactions on, vol. 20, pp. 1092-1099, 2012.
- M. Pendo, F. West, P. Jonathan, L. Angeles, and H. Daniel, “Digitally Controlled Simple Shear Apparatus for Dynamic Soil Testing ed: ASTM, 2007.
- M. F. Rahmat, A. R. Husain, K. Ishaque, and M. Irhouma, “Self-Tuning Position Tracking Control of an Electro-Hydraulic Servo System in the Presence of Internal Leakage and Friction,” International Review of Automatic Control, vol. 3, pp. 673-683, 2010.
- C. Luo, Y. Shang, Z. Jiao, and Z. Wang, “A new type of electro-hydraulic actuator used for aircraft structural test,”International Conference on Automatic Control and Artificial Intelligence (ACAI 2012), pp. 191–194, 2012.
- M. Al-Majed and M. Tomizuka, “High-performance robust motion control of machine tools: an adaptive robust control approach and comparative experiments,”IEEE/ASME Transactions on Mechatronics, , vol. 2, pp. 63-76, 1997.
- D. Hisseine, “Robust tracking control for a hydraulic actuation system,” Proceedings of 2005 IEEE Conference in Control Applications (CCA 2005), pp. 422-42, 2005.
- M. Engineering,Y. Liu and H. Handroos, “Technical note Sliding mode control for a class of hydraulic position servo,” Mechatronics, vol. 9, pp. 111-123, 1999.
- N. Niksefat and N. Sepehri, “A QFT fault-tolerant control for electrohydraulic positioning systems,” IEEE Transactions on Control Systems Technology, , vol. 10, pp. 626-632, 2002.
- C. Kaddissi, J. Kenne, and M. Saad, “Indirect Adaptive Control of an Electro-Hydraulic Servo System Based on Nonlinear Backstepping,” 2006 IEEE International Symposium on in Industrial Electronics, pp. 3147-315, 2006
- C. Kaddissi and J. Kenn, “Identification and Real-Time Control of an Electrohydraulic Servo System Based on Nonlinear Backstepping,” IEEE/ASME Transactions on Mechatronics, vol. 12, pp. 12-22, 2007.
- J. Seo, R. Venugopal, and J.-P. Kenné, “Feedback linearization based control of a rotational hydraulic drive,”Control Engineering Practice, vol. 15, pp. 1495-1507, 2007 2007.
- J. S. Yun and H. S. Cho, “Adaptive model following control of electrohydraulic velocity control systems subjected to unknown disturbances,”Control Theory and Applications, IEE Proceedings D, vol. 135, pp. 149-156, 1988.
- B. Ayalew and K. W. Jablokow, “Partial feedback linearising force-tracking control: implementation and testing in electrohydraulic actuation,”IET Control Theory & Applications, no. 3, pp. 689–698, 2007.
- G. a. Sohl and J. E. Bobrow, “Experiments and simulations on the nonlinear control of a hydraulic servosystem,”IEEE Transactions on Control Systems Technology, vol. 7, pp. 238-247, 1999.
- M. F. Rahmat, “Modeling and Controller Design of an Electro-Hydraulic Actuator System”American Journal of Applied Sciences, vol. 7, pp. 1100-1108, 2010.
- M. G. Skarpetis, F. N. Koumboulis, and M. P. Tzamtzi, “Robust control techniques for hydraulic actuators,”Mediterranean Conference on Control & Automation, pp. 1-6, 2007.
- L. Zadeh, “On the Identification Problem,” Circuit Theory, IRE Transactions on, vol. 3, pp. 277281, 1956.
- N. H. S. M. F. Rahmat, Sy Najib Sy Salim, Mastura Shafinaz Zainal Abidin , A. A Mohd Fauzi and Z. H. Ismail, “Review on modeling and controller design in pneumatic actuator control system,” vol. VOL. 4, NO. 4, pp. 630-661, Nov. 10, 2011 2011.
- T. G. Ling, M. F. Rahmat, and A. R. Husain, “System Identification and Control of an Electro- Hydraulic Actuator System,”IEEE 8th International Colloquium on Signal Processing and its Application,pp. 85–88, 2012.
- J. M. Lee, H. M. Kim, S. H. Park, and J. S. Kim, “A Position Control of Electro-Hydraulic Actuator Systems Using the Adaptive Control Scheme,” 7th Asian Control Conference pp. 21–26, 2009.
- T. C. S. Hsia, “A new technique for robust control of servo systems,” Industrial Electronics, IEEE Transactions on, vol. 36, pp. 1-7, 1989.
- K. Tamaki, K. Ohishi, K. Ohnishi, and K. Miyachi, “Microprocessor-based robust control of a DC servo motor,” Control Systems Magazine, IEEE, vol. 6, pp. 30-36, 1986.
- E. Davison and I. Ferguson, “The design of controllers for the multivariable robust servomechanism problem using parameter optimization methods,”Automatic Control, IEEE Transactions on, vol. 26, pp. 93-110, 1981.
- T. Umeno and Y. Hori, “Robust speed control of DC servomotors using modern two degrees-of- freedom controller design,” IEEE Transactions on Industrial Electronics, vol. 38, pp. 363-368, 1991.
- J. E. Bobrow and K. Lum, “Adaptive , High Bandwidth Control of a Hydraulic Actuator,” Proceedings of the American Control Conference, pp. 71–75, 1995.
- W. Kim, D. Won, D. Shin, and C. Choo, “Mechatronics Output feedback nonlinear control for electro-hydraulic systems,” Mechatronics, vol. 22, no. 6, pp. 766-777, 2012.
- L. Del Re and a. Isidori, “Performance enhancement of nonlinear drives by feedback linearization of linear-bilinear cascade models,” Control Systems Technology, IEEE Transactions on, vol. 3, pp. 299-308, 1995.
- Z. Has and M. F. Rahmat, “Application of Self-Tuning Fuzzy PID Controller on Industrial Hydraulic Actuator using System Identification Approach,” International Journal of Smart Sensing and Intelligent System, No. 2, Vol. 2, pp. 246-261, 2009.
- W. Zeng, “Application of intelligent PDF control algorithm to an electrohydraulic position servo system,” IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp. 233238, 1999.
- A. Fink, “Discrete Sliding Mode Controller for Pressure Control with an Electrohydraulic Servovalve,” IEEE International Conference in Control Applications, vol.1, pp. 378-382, 1998.
- H. M. Chen, “Sliding mode control with varying boundary layers for an electro-hydraulic position servo system,” The International Journal of Advanced Manufacturing Technology, vol. 26, pp. 117-123, 2005.
- N. Ishak, M. Tajjudin, H. Ismail, M. Hezri, F. Rahiman, Y. Sam, and R. Adnan, “PID Studies on Position Tracking Control of an Electro-Hydraulic Actuator,” International Journal of Control Science and Engineering ,no. 5, vol. 2, pp. 120–126, 2012.
- S.M. Rozali, “PID Controller Design for an Industrial Hydraulic Actuator with Servo System,” IEEE Student Conference on Research and Development (SCOReD), pp. 13–14, 2010.
- M. Tajjudin, N. Ishak, H. Ismail, M. Hezri, F. Rahiman, and R. Adnan, “Optimized PID Control using Nelder-Mead Method for Electro-hydraulic Actuator Systems,” 2011 IEEE Control and System Graduate Research Colloquium (ICSGRC), no. 1, pp. 90–93, 2011.
- E. H. Mamdani, M. S. Eng, D. Ph, and I. E. E. E. Mem, “Control & Science Application of fuzzy algorithms for control of simple dynamic plant,” Proceedings of the Institution of Electrical Engineers, vol. 121, no. 12, pp. 1585–1588, 1974.
- P. Martin Larsen, “Industrial applications of fuzzy logic control,” International Journal of ManMachine Studies, vol. 12, pp. 3-10, 1980.
- G. Sen Gupta, S.C.Mukhopadhyay, S. Demidenko and C.H.Messom, “Master-slave Control of a Teleoperated Anthropomorphic Robotic Arm with Gripping Force Sensing”, IEEE Transactions on Instrumentation and Measurement, Vol. 55, No. 6, pp. 2136-2145, December 2006.
- Takagi, T., “Fuzzy identification of systems and its application to modeling and control,”IEEE Transactions on Systems, Man and Cybernetics, vol. 16, pp. 103–113, 1985.
- C.H. Chou and H.C. Lu, “Design of a real-time fuzzy controller for hydraulic servo systems,” Computers in Industry, vol. 22, pp. 129-142, 1993.
- [50]T.Ohji, S.C.Mukhopadhyay, M.Iwahara and S.Yamada, “Performance of Repulsive Type Magnetic Bearing System under Nonuniform Magnetization of Permanent Magnet”, IEEE Transactions on Magnetics, Vol. 36, No. 5, pp. 3696-3698, September 2000.
- “Interpolative Reasoning in Fuzzy Logic and Neural Network Theory,”IEEE International Conference on Fuzzy Systems, p. 94720, 1992.
-
[52]T.Ohji, S.C.Mukhopadhyay, M.Iwahara and S.Yamada, “Permanent Magnet Bearings for Horizontal
and Veryical Shaft Machines - A Comparative Study”, Journal of Applied Physics, Vol. 85, No. 8, pp 4648-4650, April 1999.
- S. J. Qin and G. Borders, “A multiregion fuzzy logic controller for nonlinear process control,”IEEE Transactions on Fuzzy Systems, vol. 2, pp. 74-81, 1994
- T.-S. Kuo and W.-S. Yu, “Robust indirect adaptive control of the electrohydraulic velocity control systems,”IEE Proceedings Control Theory and Applications, vol. 143, pp. 448-454, 1996.
- I. Z. M. Darus, “Self-Tuning PID Controller for Active Suspension System with Hydraulic Actuator,”2013 IEEE Symposium on Computers & Informatics (ISCI), no. 4, pp. 86–91, 2013.
- Ab Talib, M.H. “Self-tuning Fuzzy PID Controller for Electro- Hydraulic Cylinder,” IEEE Symposium on Computers & Informatics (ISCI), pp. 86-91, 2013.
- S.C.Mukhopadhyay, T.Ohji, M.Iwahara, S.Yamada and F.Matsumura, “Disturbance Attenuation and H-Inf Control on Repulsive Type Magnetic Bearing”, IEEE Transactions on Magnetics, Vol. 33, No. 5, Sept, 1997, pp 4233-4235.
- K. K. Ahn and D. Q. Truong, “Online tuning fuzzy PID controller using robust extended Kalman filter,” Journal of Process Control, vol. 19, no. 6, pp. 1011–1023, 2009.
- S.C.Mukhopadhyay, T.Ohji, T.Kuwahara, M.Iwahara, S.Yamada, F.Matsumura, “Comparative Studies of Levitation and Control Performances of Two Types Single Axis Controlled Repulsive Type Magnetic Bearing”, NASA periodicals, Vol. NASA/CP-1998-207654, pp 393-405, May 1998.
- N. Niksefat and N. Sepehri, “Design and experimental evaluation of a robust force controller for an electro-hydraulic actuator via quantitative feedback theory,” Control Engineering Practice, vol. 8, pp. 1335-1345, 2000
- N. Niksefat, N. Sepehri, and Q. Wu, “Design and experimental evaluation of a QFT contact task controller for electro-hydraulic actuators,” International Journal of Robust and Nonlinear Control, vol. 17, pp. 225-250, 2007.
DOI: https://doi.org/10.21307/ijssis-2017-762 | Journal eISSN: 1178-5608
Language: English
Page range: 338 - 367
Submitted on: Oct 30, 2014
Accepted on: Jan 15, 2015
Published on: Mar 1, 2015
Published by: Professor Subhas Chandra Mukhopadhyay
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
Related subjects:
© 2015 S. Salleh, M.F. Rahmat, S.M. Othman, K. A. Danapalasingam, published by Professor Subhas Chandra Mukhopadhyay
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.