Development of an Adjustable Gripper for Robotic Picking and Placing Operation
By:
References
- Y.C. Lee, S.J Lim, S.W. Hwang and C.S. Han, “Development of the robot gripper for a home service robot”, Proceeding of ICROS-SICE International Joint Conference, August 1821, 2009, Fukuoka, Japan, pp. 1551-1556.
- T. Gecks and D. Henrich, “Human-robot cooperation: safe pick and place operation”, Proceeding of IEEE International Workshop on Robot and Human Interactive Communication, August 13-15, 2005, Nashville, USA, pp. 549-554.
- Z.B. Li, Y.J Lou, Z.X. Li, G.L. Yang and J. Gao, “T2:a novel two degree of freedom translational parallel robot for pick and place operation”, Proceeding of 2010 8th IEEE International Conference on Control and Automation, June 9-11, 2010,Xiamen, China, pp. 725-730.
- Aliasgar, O. K Sastry, S.B Hampapur, S.S Kamat, V.K Vyshak, “Automated pick and place system”, Proceeding of 2010 International Conference on Mechanical and Electrical Technology (ICMET), September 10-12, 2010, Singapore, pp. 682-686.
- H. Ali, H.H Low, and C.S Tei, “Design and development of smart gripper with vision sensor for industrial application”, Proceeding of 3rd International Conference on Computational Intelligence, Modeling & Simulation, September 20-22, 2011, Langkawi, Malaysia, pp.175180.
- M. Riedel, M. Husing, M. Nefzi and B. Corvers, “An adjustable gripper as a reconfigurable robot with a parallel structure”, Proceeding of 2nd International Workshop on Fundamental Issue and Future Research Directions for Parallel Mechanisms and Manipulator, September 21-22, 2008, Montpellier, France.
- A.R. Mannaa, M. Akyurt and A.K. El-Kalay, “Six-link gripper for cylindrical objects”, Journal of Islamic Academy of Sciences, Vol. 3, No. 1, pp. 6-10, 1990.
- G. Lundström, “Industrial robot grippers”, Industrial Robot: An International Journal, Vol. 1 No. 2, pp.72 - 82, 1974.
- P.S.Ramaiah, M.Venkateswara Rao and G.V.Satyanarayana, “A microcontroller based four fingered robotic hand”, International Journal of Artificial Intelligence & Applications (IJAIA), Vol.2, No.2, pp. 90-102, April 2011.
- Konukseven E. Ì., Kaftanoğlu B. and Balkan T., “Multisensor controlled robotic tracking and automatic pick and place”, Proceeding of IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS’97), September 8-12, 1997,Grenoble, France, pp. 1356-1361.
- M.Mehdian and H.Rahnejat, “A sensor gripper using tactile sensors for object recognition, orientation control, and stable manipulation”, IEEE Transactions on Systems, Man, and Cybernetics, Vol. 9, pp 1250 – 1261, 1989.
- N.Hoshikawa, M. Ohka and H. Yussof,” Bottom-up approach for behavior acquisition of agents equipped with multi-sensors”, International Journal on Smart Sensing and Intelligent Systems ,Vol. 4, No. 4, pp. 583-606,December 2011.
- H. Yussof, J. Wada and M. Ohka, “Analysis of tactile slippage control algorithm for robotic hand performing grasp-move-twist motions”, International Journal on Smart Sensing and Intelligent Systems, Vol. 3, No. 3, pp. 359-375,September 2010.
- K.Qian, X.Ma, X. Z. Dai and F. Fang,” Spatial-temporal collaborative sequential Monte Carlo for mobile robot localization in distributed intelligent environments”, International Journal on Smart Sensing and Intelligent Systems, Vol. 5, No. 2, pp. 295- 314,June 2012.
- C.M. Seguna and M.A. Saliba, “The mechanical and control system design of a dexterous robotic gripper”, Proceeding of International IEEE Conference on Electronics, Circuits, and Systems, September 2-5, 2001, Malta, pp. 1195 - 1201.
- M. A. Saliba and M. Axiak, “Design of a compact, dexterous robot hand with remotely located actuators and sensors”, Proceeding of the 15th Mediterranean Conference on Control and Automation, July 27-29, 2007, Athens, Greece.
- [17]S. Costo, G. Altamura, L.E. Bruzzone, R.M. Molfino and M.Zoppi, “Design of a reconfigurable gripper for the fast robotic picking and handling of limb sheets”, Proceeding of rd the 33rd International Symposium on Robotics, October 7-11, 2002, Stockholm, Sweden.
DOI: https://doi.org/10.21307/ijssis-2017-521 | Journal eISSN: 1178-5608
Language: English
Page range: 1019 - 1043
Submitted on: Jul 28, 2012
Accepted on: Oct 31, 2012
Published on: Dec 1, 2012
Published by: Professor Subhas Chandra Mukhopadhyay
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Related subjects:
© 2012 A. Che Soh, S.A. Ahmad, A.J. Ishak, K. N. Abdul Latif, published by Professor Subhas Chandra Mukhopadhyay
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.