Industrial Robot Calibration Using a Virtual Linear Constraint
By:
References
- B. Mooring, Z. S. Roth and M. R. Driels, Fundamentals of manipulator calibration, John Wiley & Sons, 1991.
- X. L. Zhong and J. M. Lewis, “A new method for autonomous robot calibration”, Proceedings of the 1995 IEEE International Conference on Robotics and Automation. Nagoya, Aichi, Japan, 1995, pp.1790-1795.
- J. M. Hollerbach and C. W. Wampler, “The calibration index and taxonomy for robot kinematic calibration methods”, International Journal of Robotics Research, Vol.15, No.6, 1996, pp.573–91.
- M. R. Driels and U. S. Pathre, “Robot calibration using an automatic theodolite”, The International Journal of Advanced Manufacturing Technology, Vol.9, No.2, 1994, pp.114-125.
- A. Rauf, A.Pervez and J. Ryu, “Experimental results on kinematic calibration of parallel manipulators using a partial pose measurement device”, IEEE Transactions on Robotics, Vol.22, No.2, 2006, pp.379-384.
- J. H. Borm and C. H. Meng, “Determination of optimal measurement configurations for robot calibration based on observability measure”, The International Journal of Robotics Research, Vol.10, No.1, 1991, pp.51-63.
- M. R. Driels, W. Swayze and S. Potter, “Full-pose calibration of a robot manipulator using a coordinate-measuring machine”, The International Journal of Advanced Manufacturing Technology, Vol.8, No.1, 1993, pp.34-41.
- K. Lau, R. J. Hocken and W. C. Haight, “Automatic laser tracking interferometer system for robot metrology”, Precision Engineering, Vol.8, No.1, 1986, pp.3-8.
- A. Nubiola and I. A. Bonev, “Absolute calibration of an ABB IRB1600 robot using a laser tracker”, Robotics and Computer-Integrated Manufacturing, Vol.29, No.1, 2013, pp.236-245.
- M. Ikits and J. M. Hollerbach, “Kinematic calibration using a plane constraint”, Proceedings of the 1997 IEEE International Conference on Robotics and Automation, Albuquerque, NM, USA, 1997, pp.3191–3196.
- H. Zhuang, S. H. Motaghedi and Z. S. Roth, “Robot calibration with planar constraints”, Proceedings of the 1999 IEEE International Conference on Robotics and Automation, Detroit, MI, USA, 1999, pp.805–810.
- A. Omodei, G. Legnani and R. adamini, “Calibration of a measuring robot: Experimental results on a 5 DOF structure”, Journal of Robotic Systems, Vol.18, No.5, 2001, pp.237-250.
- M. A. Meggiolaro, G. Scriffignano and S. Dubowsky, “Manipulator calibration using a single endpoint contact constraint”, Proceedings of the 2000 ASME Design Engineering Technical Conference, Baltimore, MD, USA, 2000, pp.1-8.
- W. S. Newman, C. E. Birkhimer, R. J. Horning and A. T. Wilkey, “Calibration of a Motoman P8 robot based on laser tracking”, Proceedings of the Proceedings of the 2000 IEEE International Conference on Robotics and Automation, San Francisco, CA , USA, 2000, pp.35973602.
- H. Chen, T. Fuhlbrigge, S. Choi, J. Wang and X. Li, “Practical industrial robot zero offset calibration”, Proceedings of the 4th IEEE Conference on Automation Science and Engineering, Washington DC, USA, 2008, pp.516-521.
- C. S. Gatla, R. Lumia, J. Wood, and G. Starr, “An automated method to calibrate industrial robots using a virtual closed kinematic chain”, IEEE Transactions on Robotics, Vol.23, No.6, 2007, pp.1105-1116.
- Y. Liu, N. Xi, G. Zhang, X. Li, H. Chen, C. Zhang, M. J. Jeffery and T. A. Fuhlbrigge, “An automated method to calibrate industrial robot joint offset using virtual line-based single-point constraint approach”, Proceedings of the 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, St. Louis, MO, USA, 2009, pp.715-720.
- A. Bjorck, Numerical methods for least squares problems, Society for Industrial and Applied Mathematics, 1996.
- Y. Liu, N. Xi, J. Zhao, E. Nieves-Rivera, Y. Jia, B. Gao and J. Lu, “Development and sensitivity analysis of a portable calibration system for joint offset of industrial robot”, Proceedings of the 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, St. Louis, MO, USA, 2009, pp.3838-3843.
- V. Iyer, G. R. Murthy and M. B. Srinivas, “Training Data Compression Algorithms and Reliability in Large Wireless Sensor Networks”, International Journal on Smart Sensing and Intelligent Systems, Vol.1, No.4, 2008, pp.912-921.
- A.Yousaf, F.A.Khan and Prof. Dr. L.M Reindl, “Wireless Sensing of Open Loop Micro Inductors Using Helmholtz Coil”, International Journal on Smart Sensing and Intelligent Systems, Vol.4, No.4, 2011, pp.527-546.
DOI: https://doi.org/10.21307/ijssis-2017-519 | Journal eISSN: 1178-5608
Language: English
Page range: 987 - 1001
Submitted on: Aug 19, 2012
Accepted on: Oct 25, 2012
Published on: Dec 1, 2012
Published by: Professor Subhas Chandra Mukhopadhyay
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Related subjects:
© 2012 Biqiang Du, Ning Xi, Erick Nieves, published by Professor Subhas Chandra Mukhopadhyay
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.