References
- EN 1993-1-5. 2008. Design of steel structures. Part 1-5: Plated structural elements.
- Driver RG, Abbas HH, Sause R. (2006). Shear behavior of corrugated web bridge girders. Journal Structural Engineering. ASCE 132(2), 195–203.
- Elgaaly M, Hamilton RW, Seshadri A. (1996) Shear strength of beams with corrugated webs. Journal Structural Engineering, 122(4), 390–398.
- Hamilton RW. Behavior of welded girder with corrugated webs. Ph.D. thesis. University of Maine; 1993.
- Sayed-Ahmed EY. (2001). Behavior of steel and (or) composite girders with corrugated steel webs. Canadian Journal Civil Engineering, 28(4), 656–672.
- Sause R, Braxtan TN. (2011). Shear strength of trapezoidal corrugated steel webs. Journal of Constructional Steel Research, 67, 223–236.
- Yi J, Gil H, Youm K, Lee H. (2008). Interactive shear buckling behavior of trapezoidally corrugated steel webs. Engineering Structure, 30(6), 1659–1666.
- Abbas HH, Sause R, Driver RG. (2002). Shear strength and stability of high performance steel corrugated web girders. In: SSRC conference, 361–87.
- El-Metwally AS. (1998). Pre-stressed composite girders with corrugated steel webs. Thesis for degree of master, Calgary (Alberta, Canada): University of Calgary.
- Hassanein M.F, Kharoob O.F. (2013). Behavior of bridge girders with corrugated webs: (II) Shear strength and design. Engineering Structures, 57, 544–553.
- Hiroshi S., Hiroyuki I., Yohiaki I., Koichi K. (2003). Flexural shear behavior of composite bridge girder with corrugated steel webs around middle support. JSCE; 724(I-62), 49–67.
- Eldib MEA.-H. (2009). Shear buckling strength and design of curved corrugated steel webs for bridges. Journal of Constructional Steel Research, 65, 2129–2139.
- Kowal Z., Basiński W. (2013). Wpływ sztywności blach czołowych na postaciową wytrzymałość krytyczną dźwigarów o falistym środniku (The influence of the stiffness of end stiffeners on shear critical resistance of corrugated web of girders). Konstrukcje Stalowe, 3, 50–54. (in Polish)
- The research project N N506 072538 titled. (2013). Shaping frameworks girder on the corrugated web joined by end plates. Silesian University of Technology. (in Polish)
- Basiński W. (2018). Shear buckling of plate girders with corrugated web restrained by end stiffeners. Periodica Polytechnica Civil Engineering. 62(3), 757–771. https://doi.org/10.3311/PPci.11554.
- Profiles of corrugated web of SIN girders. Principles of dimensioning. Cracow University of Technology. Cracow 2002. (in Polish)
- Abaqus software adjustment to estimate resistance of corrugated web girders reinforced with end stiffeners. This research was supported in part by PL-GRID infrastructure, and also by the WIND grant.
- Moon J, Yi J, Choi BH, Lee H. (2009). Shear strength and design of trapezoidally corrugated steel webs. Journal of Constructional Steel Research, 65, 1198–205.
- Easley JT. (1975). Buckling formulas for corrugated metal shear diaphragms. Journal Structural. Division, SECF ST7, 1403–1417.
- Kowal Z., Basiński W. (2008). Wyznaczanie sztywności obrotowej doczołowych połączeń podatnych na podstawie pomiaru drgań dźwigarów (Determination of the rotational stiffness of semirigid end joints based on the measured vibrations). Inżynieria i Budownictwo 64(8), 457–461. (in Polish)
- Wuwer W., Zamorowski J., Swierczyna Sz. (2012). Lap joint stiffness according to Eurocode EC3 and experimental investigations results. Archives of Civil and Mechanical Engineering, 12(1), 95–104.
- Kuchta K. (2004). Resistance and stiffness of plate girders with corrugated web. Ph.D. thesis. Technical University of Cracow. (in Polish)
- EN 10002-1. 2001. Metallic materials – Tensile testing – Part 1: Method of test at ambient temperature.
- Basiński W., Kowal Z. (2018). Random strength parameters of steel corrugated webs and their influence on the resistance of SIN plate girders. Architecture Civil Engineering, Environment, 11(3), 65–77. doi:10.21307/acee-2018-039.
- Memon B. A. (2004). Arc-length technique for non-linear finite element analysis. Journal of Zhejiang University SCIENCE, 5(5), 618–628.
- Basiński W., Kowal Z. (2017). Investigations into the resistance of sin girders reinforced with tensioned diagonal braces. Architecture Civil Engineering, Environment, 10(1), 53–64.
- Basiński W., Kowal Z. (2017). FEM analysis of corrugated web girders reinforced with tensioned diagonal braces. Architecture Civil Engineering Environment. 10(1), 65–78.