References
- CEB-FIP (2012). CEB-FIP Model Code 2010 (2012) Final Draft. Federation Internationale Du Béton, Bulletins 65 & 66, Lausanne, 125–155.
- RILEM Model B4 (2015). Model B4 for creep, drying shrinkage and autogenous shrinkage of normal and high strength concretes with multi-decade applicability. Draft Recommendation: TC-242-MDC MultiDecade Creep and Shrinkage of Concrete: Material Model and Structural Analysis (2015), prepared by Bazant, Z. P., Materials and Structures, 48, 753–770.
- CEB-FIP (1990). Comité Euro-International du Béton, CEB-FIP Model Code 1990. First Draft, Lausanne, Mar., 2–3, 2–28 to 2–40 (Information Bulletin No. 195).
- CEB-FIP (1999). Federation Internationale Du Béton. Structural Concrete: Textbook on behaviour, design and performance. Updated Knowledge of CEB/FIP Model Code 1990, FIB Bulletin 2(2), Lausanne, 35–52.
- RILEM Model B3 (1995). Creep and shrinkage model for analysis and design of concrete structures - Model B3. Draft RILEM Recommendation, prepared by Bazant, Z. P. and Baweja, S., Materials and Structures, 28, 357–365, 415–430, 488–495, with Errata in 29 (1996), 126.
- Wendner R., Hubler M. H. and Bazant Z. P. (2013). The B4 Model for multi-decade creep and shrinkage prediction. Proceedings of the Ninth International Conference on Creep, Shrinkage and Durability Mechanics (CONCREEP-9), 429–436.
- BS EN 1992-1-1 (2004). Eurocode 2: Design of concrete structures, Part 1-1: General – Common Rules for Buildings and Civil Engineering Structures. London: British Standards Institution (BSI).
- Fanourakis G.C. and Ballim Y. (2006, April). The influence of aggregate stiffness on the creep of concrete. Concrete Beton, 112, 5–12.
- Bazant Z. P. and Panula L. (1979). Practical prediction of time dependent deformations of concrete. Parts I-VI, Materials and Structures, 12, 169–183.
- Fanourakis G.C. (1998). The influence of aggregate stiffness on the measured and predicted creep behaviour of concrete. (MSc (Eng) dissertation, University of the Witwatersrand). Johannesburg.
- Fanourakis G. C. and Ballim Y. (2006). An assessment of the accuracy of nine design models for predicting creep in concrete. Journal of the South African Institution of Civil Engineering, 48(4), 2–8.
- Fanourakis G. C. (2011). Validation of international concrete creep prediction models by application to South African concretes. Journal of the South African Institution of Civil Engineering, 53(2), 23–30.
- Fanourakis G.C. and Ballim Y. (2003). Predicting creep deformation of concrete: a comparison of results from different investigations. Proceedings of The 11th FIG International Symposium on Deformation Measurements, Santorini, Greece, 25–28 May, 591–598.
- Wendner R., Hubler M. H. and Bazant Z. P. (2015). Statistical justification of Model B4 for multi-decade concrete creep using laboratory and bridge databases and comparisons to other models. Materials and Structures, 48, 815–833.
- Gardner N. J. and Lockman M. J. (2001). Design provisions for drying shrinkage and creep of normal strength concrete. ACI Materials Journal, 98(2), 159–167.
- American Concrete Institute (ACI) (1992). Prediction of creep, shrinkage and temperature effects in concrete structures. ACI Committee 209, Subcommittee II Report ACI 209R-92, Detroit, March, 1–12.
- BS 8110 (1985). Structural use of concrete, part 2, code of practice for design and construction. London, British Standards Institution.
- SABS 0100 (1992). Code of practice for the structural use of concrete, part 1: design. Pretoria: South African Bureau of Standards.
- AS 3600 (1988). Concrete structures – AS 3600-1988. Standards Association of Australia, North Sydney, 8–14, 32–34.
- AS 3600 (2001). Concrete structures – AS 3600-2001. Standards Association of Australia, Sydney.
- AS 3600 (2009). Concrete structures – AS 3600-2009. Standards Association of Australia, Sydney.
- Gardner N. J. (2004). Comparison of prediction provisions for drying shrinkage and creep of normal strength concretes. Canadian Journal for Civil Engineering, 31(5), 767–775.
- Gardner N. J. and Zhao J. W. (1993). Creep and shrinkage revisited. ACI Materials Journal, 90(3), 236–246.
- CEB-FIP (1970). Comité Euro-International du Béton – Federation Internationale De La Precontrainte, International recommendations for the design and construction of concrete structures. Principles and Recommendations, FIP Sixth Congress, Prague, 27–28.
- CEB-FIP (1978), Comité Euro-International du Béton – Federation Internationale De La Precontrainte, International system of unified standard codes of practice for structures. Volume II - CEB-FIP Model Code for Concrete Structures, 3rd ed. Lausanne, 56, 331–344.