References
- Bedon, C. & Amadio, C. (2020a) Mechanical analysis and characterization of IGUs with different silicone sealed spacer connections – Part 1: Experiments. Glass Structures & Engineering, 5, 301-325.10.1007/s40940-020-00122-w
- Bedon, C. & Amadio, C. (2020b) Mechanical analysis and characterization of IGUs with different silicone sealed spacer connections – Part 2: Modelling. Glass Structures & Engineering, 5, 327-346.10.1007/s40940-020-00123-9
- Buddenberg, S., Hof, P. & Oechsner, M. (2016) Climate loads in insulating glass units: Comparison of theory and experimental results. Glass Struct. Eng., 1, 301-313.
- Curcija, C. & Vidanovic, S. (2012) Predicting Thermal Transmittance of IGU Subject to Deflection. Lawrence Berkeley National Laboratory, Environmental Energy Technologies Division: Berkeley, CA, USA.
- Feldman, M. et al. (2014) Guidance for European Structural Design of Glass Components; Support to the Implementation, Harmonization and Further Development of the Eurocodes. Luxembourg, Luxembourg Publications Office of the European Union.
- Feldmeier, F. (2006) Klimabelastung und Lastverteilung bei Mehrscheiben-Isolierglas. Stahlbau, 6(75), 467-478.10.1002/stab.200610050
- Galuppi, L. & Royer-Carfagi, G. (2020) Green’s functions for the load sharing in multiple insulating glazing units. International Journal of Solids and Structures, 206, 412-425.10.1016/j.ijsolstr.2020.09.030
- Hart, R., Goudey, H., Arasteh D. & Curcija, DC. (2012) Thermal performance impacts of center-of-glass deflections in installed insulating glazing units. Energy and Buildings, 54, 453-460.10.1016/j.enbuild.2012.06.026
- Kuliński, K. & Palacz, P. (2021) Comparison of internal forces redistribution and displacements subjected to the dynamic wind gusts depending of point fixed glass connector model shape. Periodica Polytechnica-Civil Engineering, 65, 1008-1014.10.3311/PPci.18376
- Penkova, N., Krumov, K., Zashkova, L. & Kassabov, I. (2017) Heat transfer and climatic loads at insulating glass units in window systems. International Journal of Advances in Science Engineering and Technology, 5, 22-28.
- Pietrzak, A. (2014) Koncepcja „szklanych domów” w budownictwie energooszczędnym. Construction of Optimized Energy Potential, 2(14), 60-66.
- Respondek, Z. (2017) Rozkład obciążeń środowiskowych w wielokomorowej szybie zespolonej. Construction of Optimized Energy Potential, 1(19), 105-110.10.17512/bozpe.2017.1.15
- Respondek, Z. (2020) Heat transfer through insulating glass units subjected to climatic loads. Materials, 13, 286.10.3390/ma13020286701437331936391
- Respondek, Z., Kozłowski, M. & Wiśniowski, M. (2022) Deflections and stresses in rectangular, circular and elliptical insulating glass units. Materials, 15, 2427.10.3390/ma15072427899953835407763
- Solvason, K.R. (1974) Pressures and stresses in sealed double glazing units. Technical Paper No. 423, Division of Building Research, National Research Council Canada, Ottawa.
- Stratiy, P. (2017) Numerical-and-analytical method of estimation insulated glass unit deformations caused by climate loads. Advances in Intelligent Systems and Computing, 692, 970-979.10.1007/978-3-319-70987-1_105
- Timoshenko, S. & Woinowsky-Krieger, S. (1959) Theory of Plates and Shells. New York – Toronto – London, McGraw-Hill Book Company. Inc.
- Van Den Bergh, S., Hart, R., Jelle, B.P. & Gustavsen, A. (2013) Window spacers and edge seals in insulating glass units: A state-of-the-art review and future perspectives. Energy and Buildings, 58, 263-280.10.1016/j.enbuild.2012.10.006