References
- ANDREWS, M. (2002): Wood quality measurement - son et lumiere. NZ Jour. For. Res. 32: 19-21.
- ATWOOD, R. A., T. L WHITE and D. A. HUBER (2002): Genetic parameters and gains for growth and wood properties in Florida source loblolly pine in the sourtheastern United States. Can. J. of For. Res 32: 1025-1038.
- BALTUNIS, B., H. X. WU and M. B. POWELL (2007): Inheritance of density, microfibril angle and modulus of elasticity in the juvenile wood of Pinus radiata at two locations in Australia. Can. J. of For. Res (in press).
- BECKER, W. A. (1984): Manual of Quantitative Genetics. 4th ed. Academic Enterprises, Pullman, Washington.
- BOOKER, R. E. and C. T. SORENSSON (1999): New tools and techniques to determine mechanical wood properties. FIEA, Wood Quality Symposium, Emerging technologies for evaluating wood quality for wood processing, Melbourne, Dec. 1999.
- BORRALHO, N. M. G. (1995): The impact of individual tree mixed models (BLUP) in tree breeding strategies. In: ‘Eucalypt Plantations: improving fibre yield and quality’ (Eds B. M. POTTS, N. M. G. BORRALHO, J. B. REID, R. N. CROMER, W. N. TIBBITS and C. A. RAYMOND) pp 141-145 Proc CRCTHF-IUFRO Conference Hobart 19-24 Feb (CRC for Temperate Hardwood Forestry: Hobart).
- BURDON, R. D., R. P. KIBBLEWHITE, J. C. F. WALKER, A. ROBERT, R. A. MEGRAW, R. EVANS and D. J. COWN (2004): Juvenile Versus Mature Wood: A New Concept, Orthogonal to Corewood Versus Outerwood, with Special Reference to Pinus radiata and P. taeda. For. Sci. 50: 399-415.
- CARTER, P., S. CHAUHAN and L. WALKER (2005): Sorting logs and lumber for stiffness using Director HM200. Wood and Fiber Science 38: 49-54.
- CAVE, I. D. (1969): The longitudinal modulus of Pinus radiata. Wood Sci. and Tech 3: 40-48.
- COSTA E SILVA, J., N. M. BORRALHO and B. M. POTTS (2004): Additive and non-additive genetic parameters from clonally replicated and seedling progenies of Eucalyptus globulus. Theor. Appl. Genet. 108: 1113-1119.
- COTTERILL, P. P. and C. A. DEAN (1988): Changes in the genetic control of growth of radiata pine to 16 years and efficiencies of early selection. Silvae Genet. 37: 138-146.
- COTTERILL, P. P. and C. A. DEAN (1990): Successful Tree Breeding with Index Selection. Division of Forestry and Forest Products, CSIRO, Australia.
- DUNGEY, H. S., A. C. MATHESON, D. KAIN and R. EVANS (2006): Genetics of wood stiffness and its component traits in Pinus radiata. Can. J. of For. Res 36: 1165-1178.
- EVANS, R. (2003): Wood stiffness by X-ray diffractometry. In: Proc. of the Workshop, Characterisation of the Cellulosic Cell Wall, Grand, Lake, Colorado, 25-27 August 2003. University of Iowa and the Society of Wood Science and Technology, Madison, Wisconsin, USA.
- EVANS, R. and J. ILIC (2001): Rapid prediction of wood stiffness from microfibril angle and density. For. Prod. Journal 51: 53-57.
- GAPARE, W. J., H. X. WU and A. ABARQUEZ (2006): Genetic control of the time of transition from juvenile to mature wood in Pinus radiata D. Don. Ann. For. Sci 63: 871-878.
- GAPARE, W. J., M. IVKOVIC´, M. B. POWELL, T. A. MCRAE and H. X. WU (2007): Genetics of shrinkage in juvenile trees of Pinus radiata D. Don from two test sites in Australia. Silvae Genet. (in press).
- GWAZE, D. P., F. E. BRIDGWATER, T. D. BYRAM, J. A. WOOLLIAMS and C. G. WILLIAMS (2000): Predicting ageage genetic correlations in tree-breeding programs: a case study of Pinus taeda L. Theor. Appl. Genet. 100: 199-206.10.1007/s001220050027
- GEZAN, S. A. (2005): Optimal design and analysis of clonal forestry trials using simulated data. Unpublished PhD Thesis, University of Florida. 117pp.
- GILMOUR, A. R., B. J. GOGEL, B. R. CULLIS and R. THOMPSON (2005): ASReml User Guide Release 2.0, VSN International Ltd, Hemel Hempstead HP1 1ES, UK.
- HYLEN, G. (1999): Age trends in genetic parameters of wood density in young Norway spruce. Can. J. For. Res. 29: 135-143.
- ILIC, J. (2001): Relationship among the dynamic and static elastic properties of air-dry Eucalyptus delegatensis R. Baker. Holz als Roh- und Werkstoff 59: 169-175.
- ILIC, J. (2003): Dynamic MOE of 55 species using small wood beams. Holz als Roh- und Werkstoff 61: 167-172.
- IVKOVIĆ, M., H. X. WU, T. A. MCRAE and M. B. POWELL (2006): Developing breeding objectives for Pinus radiata structural wood production I: Bioeconomic model and economic weights. Can. J. For. Res 36: 2920-2931.
- JOHNSON, G. R. and B. GARTNER (2006): Genetic variation in basic density an modulus of elasticity of coastal Douglas- fir. Tree Genetics and Genomes 3: 25-33.
- KUMAR, S. (2004): Genetic parameter estimates for wood stiffness, strength, internal checking and resin bleeding for radiata pine. Can. J. For. Res 34: 2601-2610.
- KUMAR, S., K. J. S. JAYAWICKRAMA, J. LEE and M. LAUSBERG (2002): Direct and indirect measures of stiffness and strength show high heritability in a wind-pollinated radiata pine progeny test in New Zealand. Silvae Genet. 51: 256-261.
- KUMAR, S. and L. LEE (2002): Age-age correlations and early selection for end-of-rotation wood density in radiata pine. For. Gen. 9: 323-330.
- LI, L. and H. X. WU (2005): Efficiency of early selection for rotation-aged growth and wood density traits in Pinus radiata. Can. J. For. Res. 35: 2019-2029.
- LASSARRE, J., E. MASON and M. WATTS (2004): The influence of initial stocking on corewood stiffness in a clonal experiment of 11-year old Pinus radiata D. Don. N. Z. J. For. Sci. 49: 18-23.
- LYNCH, M. and B. WALSH (1998): Genetics and Analysis of Quantitative Traits. Sinauer, Sunderland USA.
- MATHESON, A. C., K. G. ELDRIDGE, A. G. BROWN and D. J. SPENCER (1986): Wood volume gains from first-generation radiata pine seed orchards. CSIRO Division of Forest Research User Series 4. 13pp.
- MATHESON, A. C., D. J. SPENCER and D. MAGNUSSEN (1994): Optimum age for selection in Pinus radiata using area under bark for age:age correlations. Silvae Genet. 43: 352-357.
- MATHESON, A. C., D. J. SPENCER, J. G. NYAKUENGAMA, J. L. YANG and R. EVANS (1997): Breeding for wood properties in radiata pine. In: BURDON, R. D.; MOORE, J. M. (Ed.) 1997: “IUFRO ‘97 Genetics of Radiata Pine”. Proceedings of NZFRI-IUFRO Conference 1-4 December and Workshop 5 December, Rotorua, New Zealand. FRI Bulletin No 203. Pp 169-179.
- MATHESON, A. C., J. L. YANG and D. J. SPENCER (1997): Breeding radiata pine for improvement of sawn timber value. In: Timber management toward wood quality and end-product value. (edited by ZHANG, S.Y., GOSSELIN, R. and CHAURET, G.). Proceedings of CTIA/IUFRO international wood quality workshop. IV-19, Quebec, Canada.
- MATHESON, A. C., R. L. DICKSON, D. J. SPENCER, B. JOE and J. ILIC (2002): Acoustic segregation of Pinus radiata logs according to stiffness. Ann. For. Sci 59: 471-477.
- MATHESON, A. C. and H. S. DUNGEY (2003): Final report on CSIRO/FR/FWPRDC/RPBC collaborative project “Improving wood stiffness through microfibril angle” PN02.1910. CSIRO Forestry and Forest Products Client Report No 1417, 47pp.
- POWELL, M. B., T. A. MCRAE, H. X. WU, G. W. DUTKOWSKI, D. J. PILBEAM (2005): Breeding strategy for Pinus radiata in Australia. pp. 308-318, Pp 308-318 in Proceedings of IUFRO Forest Genetic Meeting (Forest genetics and tree breeding in the age of genomics: progress and future), eds. by B. LI and S. MCKEAND.
- QUASS, R. L. (1988): Additive genetic model with groups and relationships. J. Dairy Sci. 71: 1338-1345.
- SCHIMLECK, L. R., R. EVANS, J. ILIC and A. C. MATHESON (2002): Estimation of wood stiffness of increment cores by near-infrared spectroscopy. Can. J. For. Res 32: 129-135.
- SHELBOURNE, C. J. A., L. A. APIOLAZA, K. J. S. JAYAWICKRAMA and C. T. SORENSSON (1997): Developing breeding objectives for radiata pine in New Zealand. In: BURDON, R. D.; MOORE, J. M. (Ed.) 1997: “IUFRO ‘97 Genetics of Radiata Pine”. Proceedings of NZFRI-IUFRO Conference 1-4 December and Workshop 5 December, Rotorua, New Zealand. FRI Bulletin No 203. Pp 160-17168.
- WALKER, J. C. F. and R. NAKADA (1999): Understanding corewood in some conifers: a selective review on stiffness and acoustics. Inter. For. Rev 1: 251-259.
- WESTELL, R. A., R. L. QUASS and L. D. VAN VLECK (1988): Genetic groups in an animal model. J. Dairy Sci. 71: 1310-1318.
- WHITE, T. L., A. C. MATHESON, P. P. COTTERILL, R. G. JOHNSON, A. F. ROUT and D. B. BOOMSMA (1999): A Nucleus Breeding Plan for Radiata Pine in Australia. Silvae Genet. 48: 122-133.
- WILLIAMS, E. R., A. C. MATHESON and C. E. HARWOOD (2002): Experimental design and analysis for tree improvement. 2nd edition, CSIRO: Melbourne. 214 pp.
- WANG, X., F. DIVOS, C. PIKON, B. K. BRASHAW, R. J. ROSS and R. F. PELLERIN (2004): Assessment of decay in standing timber using stress wave timing non-destructive evaluation tools. USDA Forest Service Forest Products Laboratory General Technical Report FPL-GTR-147, 12pp.
- WU, H. X., J. L. YANG, T. A. MCRAE, L. LI, IVKOVIC´ and M. B. POWELL (2004): Breeding for wood quality and profits with radiata pine, 1: MOE prediction and genetic correlation between early growth, density, microfibril angle and rotation-age MOE. In: Proceedings of Wood Quality 2004: Practical tools & new technologies to improve segregation of logs and lumber for processing. Albury.
- WU, H. X. and A. C. MATHESON (2002): Quantitative genetics of growth and form traits in radiata pine: Final report on RWG-1 Australia-wide radiata pine diallel project. CSIRO Forestry and Forest Products Divisional Report 138 and STBA Technical Report TR2002-01. 133pp.
- WU, H. X., M. B. POWELL, J. L. YANG, IVKOVIĆ, and T. A. MCRAE (2007): Efficiency of early selection for rotationaged wood quality traits in radiata pine. Ann. For. Sci. 64: 1-9.10.1051/forest:2006082