Numerical Calculation of Overhead Power Lines Dynamics

Roman Gogola; Justín Murín; Juraj Hrabovský

doi:10.1515/scjme-2016-0014

Abstract

This paper contains results of transient analysis of airflow around the ACSR power line cross-section in unsymmetric multi-span. The forces applied to the power line are obtained from CFD simulations, where the wind induced vibration is studied. Effect of these forces to the maximal displacement of the power line and the maximal mechanical forces in the points of attachment are studied and evaluated.

References

[1] White F.M.: Fluid Mechanics, 3rd. ed., pp 269-270, McGraw-Hill New York (1994)
Search in Google Scholar Back to article
[2] Hung P.V., Yamaguchi H., Isozaki M., Gull J. H.: Large amplitude vibrations of longspan transmission lines with bundled conductors in gusty wind. Journal of Wind Engineering and Industrial Aerodynamics, 126 (2014) 48-59.
Search in Google Scholar Back to article
[3] Wang J.: Overhead Transmission Line Vibration and Galloping. International Conference on High Voltage Engineering and Application, Chongqing, China, November 9-13, 2008.
Search in Google Scholar Back to article
[4] Chunming W., Bin M., Tingting S.: Research on the Wind-induced Vibration Coefficient of Transmission Tower-line System, Physics Procedia. 24 (2012) 149-154.
Search in Google Scholar Back to article
[5] Zhou L., Yan B., Zhang L., Zhou S.: Study on galloping behavior of iced eight bundle conductor transmission lines, Journal of Sound and Vibration, 362 (2016) 85-110.
Search in Google Scholar Back to article
[6] ANSYS Swanson Analysis System, Inc., „ANSYS Mechanical APDL Structural Analysis Guide,“ ANSYS, Houston.
Search in Google Scholar Back to article
[7] STN EN 50341-1, Overhead electrical lines exceeding AC 45 kV. Part 1: General requirements. Common specifications, 2006.
Search in Google Scholar Back to article
[8] Irvine T.: Transmission Line Vibration, Vibrationdata, May 2006. [Online]. Available: www.vibrationdata.com/Newsletters/May2006_NL.pdf. [Cit. 2006].
Search in Google Scholar Back to article
[9] Paulech J., Lago J., Kutiš V., Stančík S., Fric R., Murín J.: CFD Simulation of Air Flow around Overhead Power Lines, Bratislava, 2010.
Search in Google Scholar Back to article
[10] STN EN 50189, Conductors for overhead lines - Zinc coated steel wires, 2001.
Search in Google Scholar Back to article
[11] STN EN 60889, Hard-drawn aluminium wire for overhead line conductors, 2001.
Search in Google Scholar Back to article
[12] Murín J., Kutiš V. Improved mixture rules for the composite (FGM's) sandwich beam finite element, Barcelona, Spain, 2007, 647-650.
Search in Google Scholar Back to article
[13] Murín J., Aminbaghai M., Hrabovský J.: Elastostatic Elastostatic Analysis of the Spatial FGM Structures. Strojnícky časopis - Journal of Mechanical Engineering, 65(1), 27-56. 2016, doi: 10.1515/scjme-2016-0003
Open DOI Search in Google Scholar Back to article
[14] Murín J., Hrabovský J., Gogola R., Gálik G.: Modal analysis of the power lines by finite element methods, rev. EE časopis pre elektrotechniku, elektroenergetiku, informačné a komunikačné technológie, Trenčín, 2014.
Search in Google Scholar Back to article

Numerical Calculation of Overhead Power Lines Dynamics

Abstract

Paradigm

My account