References
- 1. BRINKSMEIER, E. et al. 2015. Metalworking fluids—Mechanisms and performance. CIRP Ann. - Manuf. Technol., 64(2), pp. 605–628.
- 2. LOTIERZO, A. et al. 2016. Insight into the role of amines in Metal Working Fluids. Corros. Sci.
- 3. SREEJITH, P.. S., NGOI, B., K., A. 2000. Dry machining: Machining of the future. Vol. 101, No. January 1999, pp. 287–291.
- 4. VERESCHAKA, A., A. et al. 2013. Development and Research of Environmentally Friendly Dry Technological Machining System with Compensation of Physical Function of Cutting Fluids. Procedia CIRP, Vol. 7, pp. 311–316.
- 5. NAJIHA, M., S., et al. 2016. Environmental impacts and hazards associated with metal working fluids and recent advances in the sustainable systems: A review. Renew. Sustain. Energy Rev., Vol. 60, pp. 1008–1031.10.1016/j.rser.2016.01.065
- 6. The National Institute for Occupational Safety and Health (NIOSH), “Metalworking fluids.” [Online]. Available: https://www.cdc.gov/niosh/topics/metalworking/.
- 7. FRIESEN, M., C. et al. 2016. Metalworking fluid exposure and cancer risk in a retrospective cohort of female autoworkers. Cancer Causes Control, 23(7), pp. 1075–82.
- 8. ROSS, A., S. 2004. Determinants of exposure to metalworking fluid aerosol in small machine shops. Ann. Occup. Hyg., 48(5), pp. 383–391.
- 9. OI, M. 2011. Emission scenario document on the use of metalworking fluids OECD Environment, Health and Safety Publications Series on Emission Scenario Documents Number 28, ENV/JM/MONO(2011)18, 33(28), pp. 1–127.
- 10. KEMP, C., P, Hill, I. 2004. Health and safety aspects in the live music industry, p. 298.
- 11. PARK, D. 2012. The Occupational Exposure Limit for Fluid Aerosol Generated in Metalworking Operations: Limitations and Recommendations, Saf. Health Work, 3(1), p. 1.
- 12. COHEN, H., WHITE, E., M. 2006. Metalworking fluid mist occupational exposure limits: a discussion of alternative methods. J. Occup. Environ. Hyg., 3(9), pp. 501–7.
- 13. CAMPANELLA, A., et al. 2010. Lubricants from chemically modified vegetable oils. Bioresour. Technol., 101(1), pp. 245–254.
- 14. SHASHIDHARA, Y., M., JAYARAM, S. R. 2010. Vegetable oils as a potential cutting fluid-An eVolution. Tribol. Int., 43(5–6), pp. 1073–1081.
- 15. Distribution Restriction Statement, Engineering and Design LUBRICANTS AND HYDRAULIC FLUIDS, Department of the Army U.S. Army Corps of Engineers, Engineer Manual 1110-2-1424. 1999. pp. 1–499.
- 16. SCHNEIDER, M., P. 2006. Review Plant-oil-based lubricants and hydraulic fluids. J. Sci. Food Agric., Vol. 86, pp. 1769–1780.10.1002/jsfa.2559
- 17. NAGENDRAMMA, P., KAUL, S. 2012. Development of ecofriendly/biodegradable lubricants: An overview. Renew. Sustain. Energy Rev., 16(1), pp. 764–774.10.1016/j.rser.2011.09.002
- 18. BATALLER, H., et al. 2004. Cutting fluid emulsions produced by dilution of a cutting fluid concentrate containing a cationic/nonionic surfactant mixture,” J. Mater. Process. Technol., 152 (2), pp. 215–220.
- 19. El BARADIE, M., A. 1996. Cutting fluids: Part I. Characterisation. Mater. Process. Technol., Vol. 56, pp. 786–797.10.1016/0924-0136(95)01892-1
- 20. El BARADIE, M., A. 1996. Cutting fluids: Part II. Recycling and clean machining. Mater. Process. Technol., Vol. 136, pp. 798–806.
- 21. RUDNICK, L., R. 2006. Synthetics, Mineral Oils, and Bio-Based Lubricants Chemistry and Technology. CRC Press Taylor & Francis Group.
- 22. MISRA, S., K., SKÖLD, R., O. 2000. Lubrication studies of aqueous mixtures of inversely soluble components. Colloids Surfaces A Physicochem. Eng. Asp., 170(2–3), pp. 91–106.
- 23. DEBNATH, S., et al. 2014. Environmental friendly cutting fluids and cooling techniques in machining: a review. J. Clean. Prod., Vol. 83, pp. 33–47.10.1016/j.jclepro.2014.07.071
- 24. SULIMAN, S., M., A., et al. 1997. Microbial contamination of cutting fluids and associated hazards. Tribol. Int., 30(10), pp. 753–757.
- 25. SCHWARZ, M., et al. 2015. Environmental and health aspects of metalworking fluid use. Polish J. Environ. Stud., 24(1), pp. 37–45.
- 26. SAHA, R., DONOFRIO, R., S. 2012. The microbiology of metalworking fluids. Appl. Microbiol. Biotechnol., 94(5), pp. 1119–1130.10.1007/s00253-012-4055-7
- 27. PETTERSSON, A. 2007. High-performance base fluids for environmentally adapted lubricants. Tribol. Int., 40(4), pp. 638–645.
- 28. ADHVARYU, A., et al. 2005. Synthesis of novel alkoxylated triacylglycerols and their lubricant base oil properties. Ind. Crops Prod., 21(1), pp. 113–119.10.1016/j.indcrop.2004.02.001
- 29. BELLUCO, W., De CHIFFRE, L. 2004. Performance evaluation of vegetable-based oils in drilling austenitic stainless steel. J. Mater. Process. Technol., 148(2), pp. 171–176.
- 30. KLOCKE, F., et al. 2005. Combination of PVD tool coatings and biodegradable lubricants in metal forming and machining. Wear, 259(7–12), pp. 1197–1206.
- 31. BURTON, B., et al. 2014. Use of vegetable oil in water emulsion achieved through ultrasonic atomization as cutting fluids in micro-milling. J. Manuf. Process., 16(3), pp. 405–413.
- 32. Von WRIGHT, A. Oral toxicity of mineral oils and related compounds. A review. pp. 1–9.
- 33. Health Council of the Netherlands. Aerosols of mineral oils and metalworking fluids (containing mineral oils). Health-based recommended occupational exposure limits. The Hague: Health Council of the Netherlands. 2011, publication No. 2011/12. p. 218.