Human Health Concenrs of Metalworking Fluid Components

Kristína Gerulová; Eva Buranská; Maroš Soldán

doi:10.1515/rput-2017-0003

Abstract

Exploration of 209 available Material safety data sheets of 85 straight oils, 46 emulsions, 51 semi-synthetics and 27 synthetics was carried out to provide a report on the most widely used components defined as dangerous substances. As many as 217 of different substances of which 15 were identified as biocides, 17 as corrosion inhibitors or neutralizing agent, 17 were lubricity improvers and 38 different base fluids, lubricity solvents or surfactants, while 93 substances were not identified specifically and 37 substances occurred only once. This article is focused on the list of base fluids in straight oils and their possible health effects.

References

1. BRINKSMEIER, E. et al. 2015. Metalworking fluids—Mechanisms and performance. CIRP Ann. - Manuf. Technol., 64(2), pp. 605–628.
Search in Google Scholar Back to article
2. LOTIERZO, A. et al. 2016. Insight into the role of amines in Metal Working Fluids. Corros. Sci.10.1016/j.corsci.2016.04.028
Search in Google Scholar Back to article
3. SREEJITH, P.. S., NGOI, B., K., A. 2000. Dry machining: Machining of the future. Vol. 101, No. January 1999, pp. 287–291.
Search in Google Scholar Back to article
4. VERESCHAKA, A., A. et al. 2013. Development and Research of Environmentally Friendly Dry Technological Machining System with Compensation of Physical Function of Cutting Fluids. Procedia CIRP, Vol. 7, pp. 311–316.
Search in Google Scholar Back to article
5. NAJIHA, M., S., et al. 2016. Environmental impacts and hazards associated with metal working fluids and recent advances in the sustainable systems: A review. Renew. Sustain. Energy Rev., Vol. 60, pp. 1008–1031.10.1016/j.rser.2016.01.065
Open DOI Search in Google Scholar Back to article
6. The National Institute for Occupational Safety and Health (NIOSH), “Metalworking fluids.” [Online]. Available: https://www.cdc.gov/niosh/topics/metalworking/.
Search in Google Scholar Back to article
7. FRIESEN, M., C. et al. 2016. Metalworking fluid exposure and cancer risk in a retrospective cohort of female autoworkers. Cancer Causes Control, 23(7), pp. 1075–82.
Search in Google Scholar Back to article
8. ROSS, A., S. 2004. Determinants of exposure to metalworking fluid aerosol in small machine shops. Ann. Occup. Hyg., 48(5), pp. 383–391.
Search in Google Scholar Back to article
9. OI, M. 2011. Emission scenario document on the use of metalworking fluids OECD Environment, Health and Safety Publications Series on Emission Scenario Documents Number 28, ENV/JM/MONO(2011)18, 33(28), pp. 1–127.
Search in Google Scholar Back to article
10. KEMP, C., P, Hill, I. 2004. Health and safety aspects in the live music industry, p. 298.
Search in Google Scholar Back to article
11. PARK, D. 2012. The Occupational Exposure Limit for Fluid Aerosol Generated in Metalworking Operations: Limitations and Recommendations, Saf. Health Work, 3(1), p. 1.
Search in Google Scholar Back to article
12. COHEN, H., WHITE, E., M. 2006. Metalworking fluid mist occupational exposure limits: a discussion of alternative methods. J. Occup. Environ. Hyg., 3(9), pp. 501–7.
Search in Google Scholar Back to article
13. CAMPANELLA, A., et al. 2010. Lubricants from chemically modified vegetable oils. Bioresour. Technol., 101(1), pp. 245–254.
Search in Google Scholar Back to article
14. SHASHIDHARA, Y., M., JAYARAM, S. R. 2010. Vegetable oils as a potential cutting fluid-An eVolution. Tribol. Int., 43(5–6), pp. 1073–1081.
Search in Google Scholar Back to article
15. Distribution Restriction Statement, Engineering and Design LUBRICANTS AND HYDRAULIC FLUIDS, Department of the Army U.S. Army Corps of Engineers, Engineer Manual 1110-2-1424. 1999. pp. 1–499.
Search in Google Scholar Back to article
16. SCHNEIDER, M., P. 2006. Review Plant-oil-based lubricants and hydraulic fluids. J. Sci. Food Agric., Vol. 86, pp. 1769–1780.10.1002/jsfa.2559
Open DOI Search in Google Scholar Back to article
17. NAGENDRAMMA, P., KAUL, S. 2012. Development of ecofriendly/biodegradable lubricants: An overview. Renew. Sustain. Energy Rev., 16(1), pp. 764–774.10.1016/j.rser.2011.09.002
Open DOI Search in Google Scholar Back to article
18. BATALLER, H., et al. 2004. Cutting fluid emulsions produced by dilution of a cutting fluid concentrate containing a cationic/nonionic surfactant mixture,” J. Mater. Process. Technol., 152 (2), pp. 215–220.
Search in Google Scholar Back to article
19. El BARADIE, M., A. 1996. Cutting fluids: Part I. Characterisation. Mater. Process. Technol., Vol. 56, pp. 786–797.10.1016/0924-0136(95)01892-1
Open DOI Search in Google Scholar Back to article
20. El BARADIE, M., A. 1996. Cutting fluids: Part II. Recycling and clean machining. Mater. Process. Technol., Vol. 136, pp. 798–806.
Search in Google Scholar Back to article
21. RUDNICK, L., R. 2006. Synthetics, Mineral Oils, and Bio-Based Lubricants Chemistry and Technology. CRC Press Taylor & Francis Group.10.1201/9781420027181
Search in Google Scholar Back to article
22. MISRA, S., K., SKÖLD, R., O. 2000. Lubrication studies of aqueous mixtures of inversely soluble components. Colloids Surfaces A Physicochem. Eng. Asp., 170(2–3), pp. 91–106.
Search in Google Scholar Back to article
23. DEBNATH, S., et al. 2014. Environmental friendly cutting fluids and cooling techniques in machining: a review. J. Clean. Prod., Vol. 83, pp. 33–47.10.1016/j.jclepro.2014.07.071
Open DOI Search in Google Scholar Back to article
24. SULIMAN, S., M., A., et al. 1997. Microbial contamination of cutting fluids and associated hazards. Tribol. Int., 30(10), pp. 753–757.
Search in Google Scholar Back to article
25. SCHWARZ, M., et al. 2015. Environmental and health aspects of metalworking fluid use. Polish J. Environ. Stud., 24(1), pp. 37–45.
Search in Google Scholar Back to article
26. SAHA, R., DONOFRIO, R., S. 2012. The microbiology of metalworking fluids. Appl. Microbiol. Biotechnol., 94(5), pp. 1119–1130.10.1007/s00253-012-4055-722543351
Open DOI Search in Google Scholar Back to article
27. PETTERSSON, A. 2007. High-performance base fluids for environmentally adapted lubricants. Tribol. Int., 40(4), pp. 638–645.
Search in Google Scholar Back to article
28. ADHVARYU, A., et al. 2005. Synthesis of novel alkoxylated triacylglycerols and their lubricant base oil properties. Ind. Crops Prod., 21(1), pp. 113–119.10.1016/j.indcrop.2004.02.001
Open DOI Search in Google Scholar Back to article
29. BELLUCO, W., De CHIFFRE, L. 2004. Performance evaluation of vegetable-based oils in drilling austenitic stainless steel. J. Mater. Process. Technol., 148(2), pp. 171–176.
Search in Google Scholar Back to article
30. KLOCKE, F., et al. 2005. Combination of PVD tool coatings and biodegradable lubricants in metal forming and machining. Wear, 259(7–12), pp. 1197–1206.
Search in Google Scholar Back to article
31. BURTON, B., et al. 2014. Use of vegetable oil in water emulsion achieved through ultrasonic atomization as cutting fluids in micro-milling. J. Manuf. Process., 16(3), pp. 405–413.
Search in Google Scholar Back to article
32. Von WRIGHT, A. Oral toxicity of mineral oils and related compounds. A review. pp. 1–9.
Search in Google Scholar Back to article
33. Health Council of the Netherlands. Aerosols of mineral oils and metalworking fluids (containing mineral oils). Health-based recommended occupational exposure limits. The Hague: Health Council of the Netherlands. 2011, publication No. 2011/12. p. 218.
Search in Google Scholar Back to article

Human Health Concenrs of Metalworking Fluid Components

Abstract

Paradigm

My account