References
- [1]. ZULKATI, W. DIEW, D. DELAI: D. “Effects of fillers on properties of asphalt concrete mixture”, Journal of Transportation Engineering, vol. 138, No. 7, pp. 902–910, 2012.
- [2]. B.M. HARRIS, K.D. STEWART: “Analysis of mineral fillers and mastics used in stone matrix asphalt”, Journal of the Association of Asphalt Paving Technologists, vol. 6, pp. 54–95, 1995.
- [3]. S. WU, J. ZHU, J. ZHONG, D. WANG: “Experimental investigation on related properties of asphalt mastic containing recycled brick powder”, Construction Building Materials, vol. 25, No. 6, pp. 2883–2887, 2011.
- [4]. M. RATNASAMY, A. ELTAHER: “The effect of type and particle size of industrial wastes filler on indirect tensile stiffness and fatigue performance of Stone Mastic Asphalt mixtures”, Australian Journal of Basic and Applied Sciences, vol. 5, No. 11, pp. 297–308, 2011.
- [5]. I. ISHAI, J. CRAUS: “Effects of some aggregate and filler characteristics on behavior and durability of asphalt paving mixtures”, Transportation Research Record 1530, Transportation Research Board, National Research Council, Washington, DC, pp. 75–85, 1996.
- [6]. P. KUMAR, H.C. MEHNDIRATTA, V. SINGH: “Use of fly ash in bituminous layer of pavement”, Indian Highways, pp. 41–50, 2008.
- [7]. V. SHARMA, S. CHANDRA, R. CHOUDHARY: “Characterization of fly ash bituminous concrete mixes”, Journal of Materials in Civil Engineering, vol. 22, No. 12, pp. 1209-1216, 2010.
- [8]. A.H. ALJASSAR, S. METWALI, M.A. ALI: “Effect of filler types on Marshall Stability and retained strength of asphalt concrete”. The International Journal of Pavement Engineering, vol. 5, No. 1, pp. 47–51, 2004.
- [9]. H. AL-SAFFAR: “The effect of filler type and content on hot asphalt concrete mixtures properties”, Al-Rafidain Engineering, vol. 21, No. 6, pp. 88-100, 2013.
- [10]. T. RAVINDRA, R.K. JAIN, M.H. KOSTHA: “Effect of fillers on bituminous paving mixes”, International Journal of Engineering Research & Science & Technology, vol. 2, No. 4, pp. 137-142, 2013.
- [11]. H.S. DO, P.H. MUN, R. SUK: “A study on engineering characteristics of asphalt concrete using filler with recycled waste lime”, Waste Management, vol. 28, pp. 191–199, 2008.
- [12]. J.C. PETERSON: “Lime-treated pavements offer increased durability”, Roads and Bridges Journal, vol. 26, No. 1, pp. 85–87, 1988.
- [13]. L. DARTNELL: “A study of limestone dust calcined shale and asbestos as mineral fillers in asphalt paving mixtures”, Canadian Tech. Asphalt Assoc. Proceedings, vol. 12, pp. 51–60, 1967.
- [14]. B. FUCIC: “Influence of filler types on the properties of bituminous mixtures”, Research Report, Zagreb University, Zagreb, 137 p., 1976.
- [15]. S.D. RAMSWAMY, M.A. AZIZ: “Assessment of effect of filler on the stripping of bituminous mix”. 4th Conference of the Road Engineering Association of Asia and Australasia, Jakarta, Indonesia, vol. 3, pp. 159–170, 1983.
- [16]. J.C. ROSNER, R.D. PAVLOUICH, J.G. CHEHOVITS: “Fly ash as a mineral filler and anti-strip agent for asphalt concrete”, Report No. FHWA-AZ-81/173 Washington, DC, FHWA, 1981.
- [17]. M.G. BAIG, H.I. AL-ABDUL WAHAB: “Mechanistic evaluation of lime modified asphalt concrete mixtures”, ASCE Journal of Materials in Civil Engineering, vol. 10, No. 3, pp. 153–160, 1998.
- [18]. M.N. RAHMAN, M.A. SOBHAN: “Use of non-conventional fillers on asphalt-concrete mixture”, International Journal of Innovation and Applied Studies, vol. 3, No. 4: pp. 1101-1109, 2013.
- [19]. AMERICAN SOCIETY FOR TESTING AND MATERIALS: ASTM D 1559: “Test method for resistance to plastic flow of bituminous mixtures using Marshall Apparatus”, Annual Book of ASTM Standards 2000, Sec. 4 — Construction, Vol. 04.03, Road and Paving Materials; Vehicle – Pavement Systems, West Conshohocken, PA. ASTM International, 2000.