References
- 1. Kozak, J.: Elastic protection coatings for ship fuel tanks, intended for the increasing of environment protection level. Polish Maritime Research, 15, (2008).
- 2. Dobrzyńska, R.: Selection of outfitting and decorative materials for ship living accommodations from the point of view of toxic hazard in the initial phase of fire progress. Polish Maritime Research, 16, (2009).10.2478/v10012-008-0025-5
- 3. Skibicki, D., Sempruch, J., Pejkowski, Ł.: Model of nonproportional fatigue load in the form of block load spectrum. Materwiss. Werksttech. 45, 68-78 (2014).
- 4. Pejkowski, Ł., Skibicki, D.: Criteria Evaluation for Fatigue Life Estimation under Proportional and Non-Proportional Loadings. Mater. Sci. Forum. 726, 189-192 (2012).
- 5. Design principles - technical safety. NORSOK S-DP-001.
- 6. Macgillivray, H.: The Development of Standards for Instrumented Charpy Testing. 1-34 (2008).
- 7. Stephens, R.I., Fatemi, A., Stephens, R.R., Fuchs, H.O.: Metal Fatigue in Engineering. Wiley (2000).
- 8. Żyliński, B.: Finite element local analysis of wave slamming on offshore structure. Polish Maritime Research, 1, 8-12 (2009).
- 9. Augustyniak, M., Porembski, G.: FEM strength analysis of sandwich panels for ship structure applications. Polish Maritime Research, S 1, 24-26 (2006).
- 10. Bogdaniuk, M., Górecki, Z., Brzóska, M.: FEM analysis of ultimate strength of steel panels. Polish Maritime Research, S 1, 21-23 (2006).
- 11. Design of Nuclear Power Plants against Seismic Events; Part 4: Components. Nucl. Saf. Stand. Comm. (1996).
- 12. www.earthquake.usgs.gov; date accessed 2017-10-10.
- 13. Jia, J.: Modern Earthquake Engineering - Offshore and Land-based Structures. Springer-Verlag GmbH Germany (2017).
- 14. ASCE 7-95: Minimum design loads for buildings and other structures. Am. Soc. Civ. Eng. ASCE, NY. (1995).
- 15. Benoit, S.C.: Seismic Design for Buildings. U.S. Army Corps Eng. 829 (2005).
- 16. Stopel, M., Skibicki, D.: Determination of Johnson-Cook model constants by measurement of strain rate by optical method. AIP Conf. Proc. 1780, (2016).
- 17. Livermore Software Technology Corporation, LS-Dyna Keyword User’s Manual, volume II - Volume II R7.1, Materials & Design, (2014).
- 18. Xue, Q., Nesterenko, V.F., Meyers, M.A.: Evaluation of the collapsing thick-walled cylinder technique for shear-band spacing. Int. J. Impact Eng. 28, 257-280 (2003).