Identification of Influence of Part Tolerances of 3PWR-SE Pump On Its Total Efficiency Taking Into Consideration Multi-Valued Logic Trees

Deptuła, Adam; Osiński, Piotr; Partyka, Marian

doi:10.1515/pomr-2017-0006

Abstract

This paper presents the way of identifying the influence of the tolerance of model pumps (TYPE 3PWR-SE) construction on the total efficiency. The identification of sensitive control dimensions (Value/Tolerance) of examined pumps has been made by means of the multi-valued logic and inductive decision trees. In order to confirm the obtained results, multiple-valued logic trees have been used in the paper according to algorithms for the minimization of individual logic functions. What is more, a specific monotonicity of values of the most key parameters has been determined for the investigated set of pumps having individual specification numbers.

References

1. Abel F.: Johannes Kepler and his importance to modern science, Inter Nations Bonn - Bad Godesberg, 1971
Search in Google Scholar Back to article
2. Berghofer S., Reiter. M.: Formalizing the logic-automaton connection, In: Proc. of the 22nd International Conference on Theorem Proving in Higher Order Logics, LNCS No 5674, 147-163, 200910.1007/978-3-642-03359-9_12
Search in Google Scholar Back to article
3. Bueno M.J. M., Hernando M. D., Aguera A., Fernandez- Alba A.: Application of passive sampling devices for screening of micro-pollutants in marine aquaculture using LC-MS/MS, Talanta, Vol. 77, 4, 15, 2009, pp. 1518-1527.10.1016/j.talanta.2008.09.04719084673
Search in Google Scholar Back to article
4. Chang Q., Zhou H, Xie Z., Shen S.: Anchoring mechanism and application of hydraulic expansion bolts used in soft rock roadway floor heave control, International Journal of Mining Science and Technology, Vol. 23, 3, 2013, pp. 323-32810.1016/j.ijmst.2013.05.017
Search in Google Scholar Back to article
5. Deptuła A.: Application of game graphs to describe the inverse problem in the designing of mechatronic vibrating systems. GRAPH-BASED MODELLING IN ENGINEERING, Springer, 2015 [accepted for print]10.1007/978-3-319-39020-8_14
Search in Google Scholar Back to article
6. Deptuła A.: Application of multi-valued weighting logical functions in the analysis of a degree of importance of construction parameters on the example of hydraulic valves, International Journal of Applied Mechanics and Engineering, 19(3), 539-548, 201410.2478/ijame-2014-0036
Search in Google Scholar Back to article
7. Deptuła A.: Game- tree structures with the complex complexity level as a tool in knowledge engineering. Systems in Management, Vol 2. Z. 2, ISSN 2084-5537, 2014
Search in Google Scholar Back to article
8. Deptuła A.: Integrated decision-making system in the study of acoustic an example of the gear pump Industrial transport and working machines (in Polish), 4(30), str. 65-71, ISSN 1899-5489, 2015
Search in Google Scholar Back to article
9. Deptuła A., Partyka M. A.: Decision optimization of machine sets with taking into consideration logical tree minimization of design guidlines, International Journal of Applied Mechanics and Engineering, Vol.19, No.3, University Press Zielona Gora, pp. 549-561 ISSN 1425-16554, 201410.2478/ijame-2014-0037
Search in Google Scholar Back to article
10. Deptuła A., Partyka M.A.: Graphic matrix formalization of logical decision trees in the optimization of machine systems, GRAPH-BASED MODELLING IN ENGINEERING, Springer, 2015 [accepted for print]10.1007/978-3-319-39020-8_15
Search in Google Scholar Back to article
11. Deptuła A., Partyka M. A.: Separate logical analysis of design guidelines in the machine systems modelling. International Journal of Applied Mechanics and Engineering, Vol.17, No.3, pp. 779-790, ISSN 1425-1655, 2012
Search in Google Scholar Back to article
12. Dymarski P, Dymarski C.: A numerical model to simulate the motion of a lifesaving module during its launching from the ship’s stern ramp, Polish Maritime Research, Vol. 21, 2, pp. 34-40, ISSN 2083-7429, 201410.2478/pomr-2014-0016
Search in Google Scholar Back to article
13. Dymarski C.: Żuraw pokładowy z kompensacją nurzania, Napędy i Sterowanie, 17, 4, pp.112- 116, 2015
Search in Google Scholar Back to article
14. Kollek W. Osiński P.: Modelling and design of gear pumps, Wroclaw University of Technology Publishing House, Wrocław, 2009
Search in Google Scholar Back to article
15. Kollek W., Osiński P., Stosiak M., Wilczyński A., Cichoń P.: Problems relating to high-pressure gear micropumps, Archives of Civil and Mechanical Engineering, Vol. 14, nr 1, 201410.1016/j.acme.2013.03.005
Search in Google Scholar Back to article
16. Kollek W., Radziwanowska U.: Energetic efficiency of gear micropumps. Archives of Civil and Mechanical Engineering, Vol. 15, nr 1, 201510.1016/j.acme.2014.05.005
Search in Google Scholar Back to article
17. Kudźma S. Kudźma Z.: Refined model of passive branch damper of pressure fluctuations, Journal of Theoretical and Applied Mechanics, vol, 53, nr 3, 201510.15632/jtam-pl.53.3.557
Search in Google Scholar Back to article
16. Osiński P., Deptuła A., Partyka M. A.: Discrete optimization of a gear pump after tooth root undercutting by means of multi-valued logic trees, Archives of Civil and Mechanical Engineering, Vol. 13. nr 4, 201310.1016/j.acme.2013.05.001
Search in Google Scholar Back to article
19. Osiński P.: High-Pressure and Low-Fluctuation Internal Gear Pumps (in Polish), Wrocław University of Technology Publishing House, Wrocław, 2013
Search in Google Scholar Back to article
20. Osiński P., Kollek W.: Assessment of energetistic measuring techniques and their application to diagnosis of acoustic condition of hydraulic machinery and equipment, Archives of Civil and Mechanical Engineering, Vol. 13, 3, pp.167-172, 201310.1016/j.acme.2013.03.001
Search in Google Scholar Back to article
21. Osiński P.: Modelling and design of gear pumps with modified tooth profile, Saarbrucken : LAP Lambert Academic Publishing, 2014
Search in Google Scholar Back to article
22. Osiński P., Kollek W., Wilczyński A.: The use of a series of Renard in the design of hydraulic and pneumatic components (in Polish), Hydraulika i Pneumatyka, 2010
Search in Google Scholar Back to article
23. Partyka M. A.: Some remarks on the Quine - Mc Cluskey minimization algorithm of multiple- valued partial functions for design structures. - 7th Inter. Cong. Log. Method. Phil. Sc., Salzburg, Austria, 1983
Search in Google Scholar Back to article
24. Partyka M. A.: The Quine- Mc Cluskey minimization algorithm of individual multiple- valued partial functions for digital control systems. - 3rd Inter. Confer. Syst. Engin., Wright State University, Dayton, USA, 1984
Search in Google Scholar Back to article
25. Partyka M.A.: Algorytm Quine’a-Mc Cluskeya minimalizacji indywidualnych cząstkowych wielowartościowych funkcji logicznych, Studia i Monografie Nr 109, Politechnika Opolska - Oficyna Wydawnicza, Opole, 1999.
Search in Google Scholar Back to article
26. Rudnicki J.: The evaluation of the vibration measurement usability of electronic indicator LEMAG „PREMET C”. Journal of Polish CIMAC, Vol. 7, 2, pp. 167-172, 2012
Search in Google Scholar Back to article
27. Shwnoy P.P.: Game trees for decision analysis. Theory and decision, 44(2), April, pp.149-171, 199810.1023/A:1004982328196
Search in Google Scholar Back to article
28. Shiue Y.R., Guh. R.S.: The optimization of attribute selection in decision tree-based production control systems. The International Journal of Advanced Manufacturing Technology, 28, pp.737-746, 200610.1007/s00170-004-2430-y
Search in Google Scholar Back to article
29. Stryczek J., Stryczek S.: Gear pumps - a brief history (in Polish), Part 1. SINH. Sterowanie i Napęd Hydrauliczny, 1994
Search in Google Scholar Back to article
30. Stryczek S.: Hydrostatic Drives (in Polish), Vol. I, II. WNT, Warsaw., 1995
Search in Google Scholar Back to article
31. Stryczek S.: Two hundred years of hydrostatic drive , In: Drives and control hydraulic ‘96 . Scientific-Technical Conference, Szklarska Poreba (in Polish), June 1996, Wroclaw University of Technology Publishing House, 1996
Search in Google Scholar Back to article
32. Śliwiński P.: Flow of liquid in flat gaps of the satellite motor working mechanism, Polish Maritime Research 2(82) 2014 Vol 21; pp. 50-5710.2478/pomr-2014-0019
Search in Google Scholar Back to article
33. Śliwiński P.: The basics of design and experimental tests of the commutation unit of a hydraulic satellite motor, Volume 16, Issue 4, September 2016, Pages 634-644 Archives of Civil and Mechanical Engineering, 16, 4, 634-644, 201610.1016/j.acme.2016.04.003
Search in Google Scholar Back to article
34. Quine W. V.: The problem of simplifying truth-functions, American mathematical monthly, 59, pp.521- 531, 195210.1080/00029890.1952.11988183
Search in Google Scholar Back to article

Identification of Influence of Part Tolerances of 3PWR-SE Pump On Its Total Efficiency Taking Into Consideration Multi-Valued Logic Trees

Abstract

Paradigm

My account