References
- 1. PRS Regulations, Principles for Welding Procedure Qualification Tests, Publication no. 74/p, 2007 (in Polish).
- 2. PRS Regulations, pt II Hull, 2014 (in Polish).
- 3. Wierzbicka : Overview and verification of formulas used to estimate angular distortions in a T-joint. Diploma thesis, Gdansk University of Technology, Faculty of Ocean Engineering and Ship Technology, 2014 (in Polish).
- 4. K. Ferenc, J. Ferenc: Welded structures - Joint design, Wydawnictwo Naukowo-Techniczne, Warsaw 2000 (in Polish).
- 5. Czajkowski H., Jakubiec M., Lesiński K., Technology of welded structures, Warsaw 1987 (in Polish).
- 6. Sędek P., Welding stresses and distortions, [in:] Engineer’s guidebook, Welding, t. I, ed. J. Pilarczyk, Warsaw 2003, pp. 559 -597 (in Polish).
- 7. Gourd L.M., Principles of welding technologies, transl. by N. Gawroniak, Warsaw 1997 (in Polish).
- 8. Predictive formulae for weld distortion - a critical review, Abington Publishing, 1999, ISBN 185573 444 3.
- 9. http://www.simufact.de/en/solutions/sol_weld.html (05.04.2014).
- 10. G. Jung, Plasticity-Based Distortion Analysis For Fillet Welded Thin Plate T-Joints, Dissertation, The Ohio State University 2003.
- 11. Ye Zhou, Analysis of Welding Distortions using Qualitative and Semi-quantitative Techniques, The University of British Columbia, 1998.
- 12. R.W.O’Brien, Predicting weld distortion in the design of automotive components, Durham theses, Durham University (2007). Available at Durham E-Theses Online: http://etheses.dur.ac.uk/2462/.
- 13. Kozak, J.Kowalski, Problems of Determination of Welding Angular Distortions of T-fillet Joints in Ship Hull Structures, Polish Maritime Research, ISSN: 1233-2585, 2015, vol.22, No2(86), 79-85
- 14. Czajkowski H., Jakubiec M., Lesiński K., Technology of welded structures, Warsaw 1987 (in Polish).
- 15. Engineer’s guidebook: welding. T. 1., Wydawnictwa Naukowo-Techniczne, Warsaw 2003 (in Polish).