References
- 1. Kozak J., Górski Z., Fatigue strength determination of ship structural joints, Polish Maritime Research 2(69) Vol 18, 2011.
- 2. PN-EN 1993-1-9, Eurokod 3: Designing steel structures. Part 1-9: Fatigue, 2007 (in Polish).
- 3. Kocak M., et al.,. FITNET Fitness-for-Service PROCEDURE - FINAL DRAFT MK7. tom I: FITNET FFS Procedure. European Fitness-for-Service Thematic Network - FITNET, 2006.
- 4. Hobbacher A.F., The new IIW guidelines for fatigue assessment of welded joints and components- A comprehensive code recently updated. International Journal of Fatigue, Vol. 31, Is. 1, January 2009.
- 5. Hobbacher A, et al. Guidelines for fatigue design of welded joints and components, IIW document IIW-1823-07ex XIII-2151r4-07/XV-1254r4-07;2008.
- 6. ASTM E 739-91, Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (S-N) Fatigue Data, 2004.
- 7. Data Sheet on Fatigue Properties of Rail Steel by Alternating Axial Loading Life Test. [online]. Meiji University Academic Frontier. [access: 07 August 2012]. World Wide Web: <http://www.isc.meiji.ac.jp/~shinrai/ H12/H12%20 Alternating%20Axial%20(Rail%20Steel2).pdf>.
- 8. Tomaszewski T., Sempruch J., Analysis of size effect in highcycle fatigue for EN AW-6063, Solid State Phenomena, Vol. 224, 2015.
- 9. PN-EN 3987, Aviation and astronautics - Methods to test metal materials - High-cycle fatigue tests with constant amplitude of controlled load, 2010 (in Polish).
- 10. PN-H 04325, Fatigue tests of metals - Basic terms and general guidelines on preparation of specimens and testing procedure,1976 (in Polish).
- 11. ISO 12107, Metallic materials - fatigue testing - statistical planning and analysis of data, 2003.
- 12. Skibicki D., Sempruch J., Pejkowski L., Steel X2CrNiMo17-12-2 testing for uniaxial, proportional and non-proportional loads as delivered and in the annealed condition, Material Science Forum, Vol. 726, 2012.
- 13. Sempruch J., Strzelecki P., Error of fatigue life determined according to the Fitnet method, 17th International Conference on Engineering Mechanics, Svratka, Czech Republic, May 2011.
- 14. Strzelecki P., Sempruch J., Experimental verification of analytical method for determining the S-N curve for alloy steel, Key Engineering Materials, Vol. 598, 2014.
- 15. Strzelecki P., Analytical method to determine high-cycle fatigue properties of materials and construction elements (in Polish), Ph.D. thesis, 2014.
- 16. Kenan G., Mehmet D., Mustafa U., Effect of cathodic polarisation on corrosion fatigue behaviour of ion nitrided AISI 4140 steel. International Journal of Fatigue, Vol. 24 Is. 5, May 2002.
- 17. Data Sheet on Fatigue Properties of SUJ2 Steel by Rotating Bending Test (HRC30),[online], Meiji University Academic Frontier, [access: 07 August 2012], World Wide Web: http:// www.isc.meiji.ac.jp/~shinrai/H01/H01%20Rotating%20Bending%20%28SUJ-HRC30%29.pdf.
- 18. Strzelecki P., Sempruch J., Analysing slope coefficient of the Wöhler curve within finite life range (in Polish). XXV Conference on Fatigue and Fracture Mechanics, Bydgoszcz- Fojutowo 2012.
- 19. Strzelecki P., Sempruch J., Hybrid method for determining fatigue characteristic in high cycle life. 20th International Conference Engineering Mechanics 2014, Svratka, Czech Republic, May 2014.
- 20. Strzelecki P., Sempruch J., Experimental verification of the analytical method for the estimated S-N curve for limited fatigue life. Materials Science Forum, Fatigue Failure and Fracture Mechanics, Vol. 726, August 2012.
- 21. Sonsino S.M., 2007. Course of SN-curves especially in the high-cycle fatigue regime with regard to component design and safety. International Journal of Fatigue. Vol. 29, Is.12, December 2007.