Mechanical and thermal properties of tungsten carbide – graphite nanoparticles nanocomposites

Kornaus, Kamil; Gubernat, Agnieszka; Zientara, Dariusz; Rutkowski, Paweł; Stobierski, Ludosław

doi:10.1515/pjct-2016-0033

Abstract

Previous studies concerning pure tungsten carbide polycrystalline materials revealed that nanolayers of graphite located between WC grains improve its thermal properties. What is more, pressure-induced orientation of graphene nano platelets (GNP) in hot pressed silicon nitride-graphene composites results in anisotropy of thermal conductivity. Aim of this study was to investigate if addition of GNP to WC will improve its thermal properties. For this purpose, tungsten carbide with 0.5–6 wt.% of GNP(12)-additive underwent hot pressing. The microstructure observations performed by SEM microscopy. The anisotropy was determined via ultrasonic measurements. The following mechanical properties were evaluated: Vickers hardness, bending strength, fracture toughness KIc. The influence of GNP(12) addition on oxidation resistance and thermal conductivity was examined. It was possible to manufacture hot-pressed WC-graphene composites with oriented GNP(12) particles, however, the addition of graphene decreased both thermal and mechanical properties of the material.

References

1. Toth, LE. Transition metal carbides and nitrides. New York: Academic Press; 1971.
Search in Google Scholar
2. Gubernat, A. & Stobierski, L. (2009). Węgliki metalopodobne Cz. I. Badania nad spiekaniem. Cer. Mat. 61(2), 113–118 from PTCer database on the World Wide Web: http://ptcer.pl/mccm/pl/szczegoly-artykulu/61/2/139
Search in Google Scholar
3. Cha, S.I. & Hong, S.H. (2003). Microstructures of binderless tungsten carbides sintered by spark plasma sintering process. Mater. Sci. Eng. A 356(1), 381–389. DOI: 10.1016/S0921-5093(03)00151-5.10.1016/S0921-5093(03)00151-5
Search in Google Scholar
4. Zhao, J., Holland, T., Unuvar, C. & Munir, Z.A. (2009). Sparking plasma sintering of nanometric tungsten carbide. Int. J. Refract. Met. Hard Mater. 27(1), 130–139. DOI: 10.1016/j.ijrmhm.2008.06.004.10.1016/j.ijrmhm.2008.06.004
Search in Google Scholar
5. Zhu, Y., Murali, S., Cai, W., Li, X., Suk, J.W., Potts, J.R. & Ruoff, R.S. (2010). Graphene and graphene oxide: synthesis, properties, and applications. Adv. Mater. 22(35), 3906–3924. DOI: 10.3144/expresspolymlett.2011.79.10.3144/expresspolymlett.2011.79
Search in Google Scholar
6. Ramirez, C., Figueiredo, F.M., Miranzo, P., Poza, P. & Osendi, M.I. (2012). Graphene nanoplatelet/silicon nitride composites with high electrical conductivity. Carbon 50(10), 36073615. DOI:10.1016/j.carbon.2012.03.031.10.1016/j.carbon.2012.03.031
Search in Google Scholar
7. Rutkowski, P., Klimczyk, P., Jaworska, L., Stobierski, L. & Dubiel, A. (2015) Thermal properties of pressure sintered alumina–graphene composites. J. Therm. Anal. Calorim. 1–10 DOI: 10.1007/s10973-015-4694-x.10.1007/s10973-015-4694-x
Search in Google Scholar
8. Rutkowski, P., Stobierski, L. & Górny, G. (2014). Thermal stability and conductivity of hot-pressed Si₃N₄–graphene composites. J. Therm. Anal. Calorim. 116(1), 321–328. DOI: 10.1007/s10973-013-3565-6.10.1007/s10973-013-3565-6
Search in Google Scholar
9. Ramírez, C., Vega-Diaz, S.M., Morelos-Gomez, A., Figueiredo, F.M., Terrones, M., Osendi, M.I. & Miranzo, P. (2013). Synthesis of conducting graphene/Si₃N₄ composites by spark plasma sintering. Carbon 57, 425–432. DOI: 10.1016/j.carbon.2013.02.015.10.1016/j.carbon.2013.02.015
Search in Google Scholar
10. Fan, Y., Estili, M., Igarashi, G., Jiang, W. & Kawasaki, A. (2014). The effect of homogeneously dispersed few-layer graphene on microstructure and mechanical properties of Al₂O₃ nanocomposites. J. Eur. Soc. Ceram. 34(2), 443–451. DOI: 10.1016/j.jeurceramsoc.2013.08.035.10.1016/j.jeurceramsoc.2013.08.035
Search in Google Scholar
11. Liu, J., Yan, H., Reece, M.J. & Jiang, K. (2012). Toughening of zirconia/alumina composites by the addition of graphene platelets. J. Eur. Soc. Ceram. 32(16), 4185–4193. DOI: 10.1016/j.jeurceramsoc.2012.07.007.10.1016/j.jeurceramsoc.2012.07.007
Search in Google Scholar
12. Kvetková, L., Duszová, A., Kašiarová, M., Dorčáková, F., Dusza, J. & Balázsi, C. (2013). Influence of processing on fracture toughness of Si₃N₄+ graphene platelet composites. J. Eur. Soc. Ceram. 33(12), 2299–2304. DOI: 10.1016/j.jeurceramsoc.2013.01.025.10.1016/j.jeurceramsoc.2013.01.025
Search in Google Scholar
13. Dusza, J., Morgiel, J., Duszová, A., Kvetková, L., Nosko, M., Kun, P. & Balázsi, C. (2012). Microstructure and fracture toughness of Si₃N₄+ graphene platelet composites. J. Eur. Soc. Ceram. 32(12), 3389–3397. DOI: 10.1016/j.jeurceramsoc.2012.04.022.10.1016/j.jeurceramsoc.2012.04.022
Search in Google Scholar
14. Kvetková, L., Duszová, A., Hvizdoš, P., Dusza, J., Kun, P. & Balázsi, C. (2012). Fracture toughness and toughening mechanisms in graphene platelet reinforced Si 3 N 4 composites. Scr. Mat. 66(10), 793–796. DOI: 10.1016/j.scriptamat.2012.02.009.10.1016/j.scriptamat.2012.02.009
Search in Google Scholar
15. Yazdani, B., Xia, Y., Ahmad, I. & Zhu, Y. (2015). Graphene and carbon nanotube (GNT)-reinforced alumina nanocomposites. J. Eur. Soc. Ceram. 35(1), 179–186. DOI: 10.1016/j.jeurceramsoc.2014.08.043.10.1016/j.jeurceramsoc.2014.08.043
Search in Google Scholar
16. Ramirez, C., Miranzo, P., Belmonte, M., Osendi, M.I., Poza, P., Vega-Diaz, S.M. & Terrones, M. (2014). Extraordinary toughening enhancement and flexural strength in Si₃N₄ composites using graphene sheets. J. Eur. Soc. Ceram. 34(2), 161–169. DOI: 10.1016/j.jeurceramsoc.2013.08.039.10.1016/j.jeurceramsoc.2013.08.039
Search in Google Scholar
17. Ramirez, C. & Osendi, M.I. (2014). Toughening in ceramics containing graphene fillers. Cer. Int. 40(7), 11187–11192. DOI: 10.1016/j.ceramint.2014.03.150.10.1016/j.ceramint.2014.03.150
Search in Google Scholar
18. Nieto, A. Lahiri, D. & Agarwal, A. (2013). Graphene NanoPlatelets reinforced tantalum carbide consolidated by spark plasma sintering. Mater. Sci. Eng. A, 582, 338–346. DOI: 10.1016/j.msea.2013.06.006.10.1016/j.msea.2013.06.006
Search in Google Scholar
19. Rutkowski, P., Stobierski, L., Zientara, D., Jaworska, L., Klimczyk, P. & Urbanik, M. (2015). The influence of the graphene additive on mechanical properties and wear of hotpressed Si₃N₄ matrix composites. J. Eur. Soc. Ceram. 35(1), 87–94. DOI: 10.1016/j.jeurceramsoc.2014.08.004.10.1016/j.jeurceramsoc.2014.08.004
Search in Google Scholar
20. Hvizdoš, P., Dusza, J. & Balázsi, C. (2013). Tribological properties of Si₃N₄–graphene nanocomposites. J. Eur. Soc. Ceram. 33(12), 2359–2364. DOI: 10.1016/j.jeurceramsoc.2013.03.035.10.1016/j.jeurceramsoc.2013.03.035
Search in Google Scholar
21. Tuinstra, F. & Koenig, J.L. (1970). Raman spectrum of graphite. J. Chem. Phys. 53,1126–1130. DOI: 10.1063/1.1674108.10.1063/1.1674108
Search in Google Scholar
22. Ramirez, C., & Osendi, M.I. (2013). Characterization of graphene nanoplatelets-Si 3 N 4 composites by Raman spectroscopy. J. Eur. Soc. Ceram. 33(3), 471–477. DOI: 10.1016/j.jeurceramsoc.2012.09.014.10.1016/j.jeurceramsoc.2012.09.014
Search in Google Scholar
23. Zheng, Yan & Andrew, R. Barron, Characterization of Graphene by Raman Spectroscopy, retrived 17 September, 2015. from: http://cnx.org/contents/f06226c5-c2a4-4798-9c75-b016acea73cd@2/Characterization-of-Graphene-b
Search in Google Scholar
24. Gubernat, A., Rutkowski, P., Grabowski, G. & Zientara, D. (2014). Hot pressing of tungsten carbide with and without sintering additives. Int. J. Refract. Met. Hard Mater. 43, 193–199. DOI: 10.1016/j.ijrmhm.2013.12.002.10.1016/j.ijrmhm.2013.12.002
Search in Google Scholar

Mechanical and thermal properties of tungsten carbide – graphite nanoparticles nanocomposites

Abstract

Paradigm

My account