Skip to main content
Have a personal or library account? Click to login
Morphological, Mechanical and Physio-chemical Performance of ortho-Cresol Epoxy Novolac Based Vinyl Ester Resin Cover

Morphological, Mechanical and Physio-chemical Performance of ortho-Cresol Epoxy Novolac Based Vinyl Ester Resin

By:  and    
Open Access
|Sep 2015

References

  1. 1. Suresha, B., Kumar, K.S., Seetharamu, S. & Kumaran, P.S. (2010). Friction and dry sliding wear behavior of carbon and glass fabric reinforced vinyl ester composites. Tribol. Int. 43, 602–609. DOI: 10.1016/j.triboint.2009.09.009.
  2. 2. Kumar, S., Satapathy, B.K. & Patnaik, A. (2012). Thermomechanical correlations to erosion performance of short glass/carbon fiber reinforced vinyl ester resin hybrid composites. Comput. Mater. Sci. 60, 250–260. DOI: 10.1016/j.commatsci.2012.03.021.
  3. 3. Shahedefar, V. & Rezadoust, A.M. (2013). Thermal and mechanical behavior of cotton/vinylester composites: Effects of some flame retardants and fibre treatment. J. Reinf. Plast. Compos. 32, 681. DOI: 10.1177/0731684413475911.
  4. 4. Stankiewicz, A., Szczygiel, I. & Szczygiel, B. (2013). Self-healing coating in anti-corrosion applications. J. Mater. Sci. 48, 8041–8051. DOI: 10.1007/s10853-013-7616-y.
  5. 5. Yabuki. A. & Okumura, K. (2012). Self healing coatings using superabsorbent polymers for corrosion inhibition in carbon steel. Corros. Sci. 59, 258–262. DOI: 10.1016/j.corsci.2012.03.007.
  6. 6. Ehsani, M., Khonakdar, H.A. & Ghadami, A. (2013). Assessment of morphological, thermal and viscoelastic properties of epoxy vinyl ester coating of glass flake and mixing method. Prog. Org. Coat. 76, 238–243. DOI: 10.1016/j.porgcoat.2012.09.010.
  7. 7. Ambrogi, V., Carfagna, C., Giamberini, M., Amendola, E. & Douglas, E.P. (2002). Liquid crystalline vinyl ester resins for structural adhesives. J. Adhes. Sci. Technol. 16, 15–32. DOI: 10.1163/15685610252771130.
  8. 8. Launikitis, M.B. (1982). Vinyl Ester Resins, In Handbook of Composites, Luben, G. Ed; Van Nostrand, Reinhold Co.: New York, 38–49.
  9. 9. Young, R.E. (1976). In Unsaturated Polyester Technology, Bruins, P.F. Ed.; Gordon and Breach: New York, 315–342.
  10. 10. Jaswal, S. & Gaur, B. (2014). New trends in vinyl ester resins. Rev. Chem. Engg. 30(6), DOI: 10.1515/revce-2014-0012
  11. 11. Gaur, B. & Rai, J.S.P. (1993). Rheological and thermal behavior of vinyl ester resin. Eur. Polym. J. 29, 1149–1153. DOI: 10.1016/0014-3057(93)90324-9.
  12. 12. Varma, I.K., Rao, B.S., Choudhry, M.S., Choudhry, V. & Varma, D.S. (1985). Effect of styrene on properties of vinyl ester resins, I. Angew. Makromol. Chem. 130, 191–199. DOI: 10.1002/apmc.1985.051300116.
  13. 13. Choudhary, M.S. & Varma, I.K. (1993). Vinyl ester resins, 3. Effect of ethyl methacrylate on thermal and mechanical properties. Angew. Makromol. Chem. 209, 33–39. DOI: 10.1002/apmc.1993.052090104.
  14. 14. Gaur, B. & Rai, J.S.P. (1992). Curing and decomposition behavior of vinyl ester resins. Polym. 33, 4210. DOI: 10.1016/0032-3861(92)90631-6.
  15. 15. Malik, M., Choudhary, V. & Varma, I.K. (2001). Effect of oxirane groups on curing behavior and thermal stability of vinyl ester resins. J. Appl. Polym. Sci. 82, 416–423. DOI: 10.1002/app.1866.
  16. 16. Bhatnagar, R. & Varma, I.K. (1989). Effect of α-methylstyrene of the curing behavior of vinyl ester resins. J. Therm. Anal. 35, 1241–1249. DOI: 10.1007/BF01913044.
  17. 17. Lem, K.W. & Han, C.D. (1984). Thermokinetics of Un-saturated Polyester and Vinyl Ester Resins. Polym. Eng. Sci. 24, 175. DOI: 10.1002/pen.760240304.
  18. 18. Jaswal, S. & Gaur, B. (2013). Curing and decomposition behavior of cresol novolac based vinyl ester resins. Chem. Engine. Trans. 32, 1591–1596. DOI: 10.3303/CET1332266.
  19. 19. Knoll, D.W., Nelson, D.H. & Keheres, P.W. (1958). Pap., 134th Am. Chem. Soc. Meet, Chicago, Division of Paint, Plastics and Printing Ink Chemistry, Paper No: 5, p. 20.
  20. 20. Gibson, S.L., Glass, T.E., Shultz, A.R. & Riffle, J.S. (2002). Controlled molecular weight cresol-formaldehyde oligomers. Polym. 43, 2017–2019. DOI: 10.1016/S0032-3861(01)00754-6.
  21. 21. Knop, A. & Pilato, L.A. (1985). Phenolic Resins, Springer-Verlag Berlin Heidelberg, New York Tokyo.
  22. 22. Sultania, M., Rai, J.S.P., Srivastava, D. (2010). Studies on the synthesis and curing of epoxidised novolac vinyl ester resin from renewable resource material. Eur. Polym. J. 46, 2019–2032. DOI: 10.1016/j.eurpolymj.2010.07.014.
  23. 23. Smith, C.A., (1987). Characterization of Polymers Used in Printed Circuit Board Manufacture. Polym. Test. 7, 79–84. DOI: 10.1016/0142-9418(87)90002-X.
  24. 24. Hsu, C.P. & Lee, L.J. (1993). Free-radical crosslinking copolymerization of styrene/unsaturated polyester resins: 1. Phase separation and microgel formation. Polym. 34, 4496–4504. DOI: 10.1016/0032-3861(93)90156-5.
  25. 25. Hsu, C.P. & Lee, L.J. (1993). Free-radical crosslinking copolymerization of styrene/unsaturated polyester resins: 3. Kinetic-gelation mechanism. Polym. 34, 4516–4523. DOI: 10.1016/0032-3861(93)90158-7.
  26. 26. Yang, Y.S.C. & Suspense, L. (1991). Curing of unsaturated polyester resins: Viscosity studies and simulations in pre-gel state. Polym. Engg. Sci. 31, 321–332. DOI: 10.1002/pen.760310505.
  27. 27. Chen, J.S. & Yu, T.L. (1998). Microgelation of unsaturated polyester resins by static and dynamic light scattering. J. Appl. Polym. Sci. 69, 871–878. DOI: 10.1002/(SICI)1097-4628(19980801)69:5<871::AID-APP5>3.0.CO;2-J.
  28. 28. Chiu, Y.Y. & Lee, L.J. (1995). Microgel formation in the free radical crosslinking polymerization of ethylene glycol dimethacrylate (EGDMA). I. Experimental. J. Polym. Sci., Part A: Polym. Chem. 33, 257–267. DOI: 10.1002/pola.1005.080330208.
  29. 29. Yang, Y.S. & Lee, L.J. (1988). Microstructure formation in the cure of unsaturated polyester resins. Polym. 29, 1793–1800. DOI: 10.1016/0032-3861(88)90393-X.
  30. 30. Han, C.D. & Lem, K.W. (1984). Chemorheology of thermosetting resins. IV. The chemorheology and curing kinetics of vinyl ester resin. J. Appl. Polym. Sci. 29, 1879–1902. DOI: 10.1002/app.1984.070290538.
  31. 31. Dusek, K. & Spevacek, J. (1980). Cyclization in vinyl- divinyl copolymerization. Polym. 21, 750–756. DOI: 10.1016/0032-3861(80)90290-6.
  32. 32. Ziaee, S. & Palmese, G.R. (1999). Effect of temperature on cure kinetics and mechanical properties of vinyl-ester resins. J. Polym. Sci., Part B: Polym. Phys. 37, 725–744. DOI: 10.1002/(SICI)1099-0488(19990401)37:7<725::AID-POLB23>3.0.CO;2-E.
  33. 33. Dua, S., Mccullough, R.L. & Palmese, G.R. (1999). Copolymerization kinetics of styrene/vinyl ester systems: low temperature reactions. Polym. Compos. 20, 379–391. DOI: 10.1002/pc.10364.
  34. 34. Ganem, N., Mortaigne, B., Bellenger, V. & Verdu, J. (1993). Influence of styrene ratio on copolymerization kinetics of dimethacrylate of diglycidylether of bisphenol A vinyl ester resin crosslinked with styrene. J. Macromol. Sci., Pure Appl. Chem. 30, 829–848. DOI: 10.1080/10601329308009592.
  35. 35. Ganem, M., Lafontaine, E., Mortaigne, B., Bellenger, V. & Verdu, J. (1994). Structure of vinyl ester networks: a rubber elasticity study. J. Macromol. Sci. Phys. 33, 155–172. DOI: 10.1080/00222349408248085.
DOI: https://doi.org/10.1515/pjct-2015-0041 | Journal eISSN: 3072-0389 (formerly 1899-4741) | Journal ISSN: 1509-8117
Language: English
Page range: 1 - 7
Published on: Sep 19, 2015
Published by: West Pomeranian University of Technology, Szczecin
In partnership with: Paradigm Publishing Services
Publication frequency: Volume open

© 2015 Shipra Jaswal, Bharti Gaur, published by West Pomeranian University of Technology, Szczecin
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.