References
- 1. Vanheusden, K., Warren, W.L., Seager, C.H., Tallant, D.R., Voigt, J.A. & Gnade, B.E. (1996). Mechanisms behind green photoluminescence in ZnO phosphor powders. J. Appl. Phys. 79, 7983. DOI: http://dx.doi.org/10.1063/1.362349
- 2. Takai, O., Futsuhara, M., Shimizu, G., Lungu, C.P. & Nozue, J. (1998). Nanostructure of ZnO thin fi lms prepared by reactive rf magnetron sputtering. Thin Sol. Films. 318 (1-2), 117-119. DOI: 10.1016/S0040-6090(97)01148-6.
- 3. Xiong, M., Gu, G., You, B. & Wu, L. (2003). Preparation and characterization of poly (styrene butylacrylate) latex/ nano ZnO nanocomposites. J. Appl. Polym. 90, 1923-1930. DOI: 10.1002/app.12869.
- 4. El-Sawy, N.M., El-Arnaouty, M.B. & Abdel Ghaffar, A.M. (2010). γ-Irradiation effect on the non-cross-linked and cross- -linked polyvinyl alcohol fi lms. Plast. Technol. Technol. Engine., 49(2), 169-177. DOI: 10.1080/03602550903284248.
- 5. Xueping, Z., Shenglin, L. & Donglin, L. (2009). The effect of additives on the hydrogen storage properties of Na- AlH. Inter. J. Hydro. Energy. 34(6), 2701-2704. DOI: 10.1016/j. ijhydene.2009.01.066.
- 6. Tharanathan, R.N. (2003). Biodegradable fi lms and composite coatings: past, present and future. Trends in Food Science & Technology. 14(3): 71-78. DOI: 10.1016/S0924-2244(02)00280-7.
- 7. Yan, R.X. (1998). Water-soluble Polymers (42). Beijing, China: Chemical industry press.
- 8. Chen, N., Li, L. & Wang, Q. (2007). New technology for thermal processing of poly (vinyl alcohol). Plastics, Rubber and Composites. 36(7-8), 283-290. DOI: http://dx.doi.org/10.1179/174328907X237575.
- 9. Nishino, T., Kani, S., Gotoh, K. & Nakamae, K. (2002). Melt processing of poly (vinyl alcohol) through blending with sugar pendant polymer. Polymer 43(9), 2869-2873. DOI: 10.1016/ S0032-3861(02)00059-9.
- 10. Liu, Z.Q., Feng, Y. & Yi, X.S. (1999). Effects of glycerin and glycerol monostearate on performance of thermoplastic starch. J. Appl. Polym. Sci. 74: 2667-1674. DOI: 10.1023/A:1017589028611.
- 11. Alexy, P., Lacik, I., Simkova, B., Bakos, D., Pronayova, N., Liptaj, T., Hanzelova, S. & Varosova, M. (2004). Effect of melt processing on thermo-mechanical degradation of poly(vinyl alcohol)s. Polym. Degrad. Stab. 85, 823-830. DOI: 10.1016/j. polymdegradstab.2004.02.011.
- 12. Wang, Q., Du, Yumin & Fan Lihong. (2005). Properties of chitosan/poly(vinyl alcohol) fi lms for drug-controlled release. J. Appl. Polym. 98, 774-779. DOI: 10.1002/app.21518.
- 13. Wang, R., Wang, Q. & Li, L. (2003). Evaporation behaviour of water and its plasticizing effect in modifi ed poly (vinyl alcohol) systems. Polym. Int. 52, 1820-1826. DOI: 10.1002/ pi.1385.
- 14. Zidan, H.M. (2003). Structural properties of CrF3 and MnCl2 fi lled poly (vinylalcohol) fi lms. J. Appl. Polym. 88, 516-521. DOI: 10.1002/app.12044.
- 15. Ismail, H. & Zaaba, N.F. (2011). Effect of additives on properties of polyvinyl alcohol (PVA)/tapioca starch biodegradable fi lms. Polymer-Plastics Technology and Engineering, 50, 1214-1219. DOI: 10.1080/03602559.2011.566241.
- 16. Tang, X. & Alavi, S. (2011). Recent advances in starch, polyvinyl alcohol based polymer blends, nanocomposites and their biodegradability. Carbohydr. Polym., 85(1), 7-16. DOI: 10.1016/j.carbpol.2011.01.030.
- 17. Zu, Y., Zhang, Y., Zhao, X., Shan, C., Zu, S., Wang, K. (2012). Preparation and characterization of chitosan-polyvinyl alcohol blend hydrogels for the controlled release of nano- -insulin International. J. Biolog. Macromol. 50(1), 82-87. DOI: 10.1016/j.ijbiomac.2011.10.006.
- 18. Jiang, X.C., Jiang, T., Zhang, X.F., Zhang, X. & Dai, H. (2012). Melt processing of poly (vinyl alcohol) through adding magnesium chloride hexahydrate and ethylene glycol as a complex plasticizer . Polym. Eng. 52, 2245-2252. DOI: 10.1002/ pen.23166.
- 19. Hualiu, Y. & Xingdai, L. (2012). Improvement of Morphology, Structure, and Thermal Properties of Electrospun PVA/RSF Fiber Mats by SiO2. Appl. Mech. Mater. 1017(184-185), 1017-1020. DOI: 10.4028/www.scientifi c.net/ AMM.184-185.1017.
- 20. Jiang, X., Jiang, T., Zhang, X. & Zhang, X. (2013). The plasticizing effect of calcium nitrate on poly (vinyl alcohol). Polym. Engine. & Sci. 52(7), 1565-1570. DOI: 10.1002/pen.23377.
- 21. Jiang, X.C., Jiang, T., Zhang, X.F., Zhang, X. & Dai, H. (2012). The plasticizing mechanism and effect of calcium chloride on starch/poly (vinyl alcohol) fi lms, Carbohyd. Polym. 90, 1677-1684. DOI: 10.1016/j.carbpol.2012.07.050.