References
- 1. International Atomic Energy Agency. (2001). Mitigation of hydrogen hazards in water cooled power reactors. Vienna: IAEA. (IAEA-TECDOC-1196).
- 2. International Atomic Energy Agency. (2011). Mitigation of hydrogen hazards in severe accidents in nuclear power plants. Vienna: IAEA. (IAEA-TECDOC-1661).
- 3. Reinecke, E. A., Bentaib, A., Kelm, S., Jahn, W., Meynet, N., & Caroli, C. (2010). Open issues in the applicability of recombiner experiments and modelling to reactor simulations. Prog. Nucl. Energy, 52, 136–147.
- 4. Fineschi, F., Bazzichi, M., & Carcassi, M. (1996). A study of the hydrogen recombination rates of catalytic recombiners and deliberate ignition. Nucl. Eng. Des., 166, 481–494.
- 5. Heitsch, M. (2000). Fluid dynamic analysis of a catalytic recombiner to remove hydrogen. Nucl. Eng. Des., 201, 1–10.
- 6. Gera, B., Sharma, P. K., & Singh, R. K. (2010). Numerical study of passive catalytic recombiner for hydrogen mitigation. CFD Letters, 2, 123–136.
- 7. Prabhudharwadkar, D. M., & Iyer, K. N. (2011). Simulations of hydrogen mitigation in catalytic recombiner: Formulation of a CFD model. Nucl. Eng. Des., 241, 1758–1767.
- 8. Meynet, N., Bentaib, A., & Giovangigli, V. (2014). Impact of oxygen starvation on operation and potential gas-phase ignition of passive auto-catalytic recombiners. Combust. Flame, 161, 2192–2202.
- 9. Klauck, M., Reinecke, E.-A., Kelm, S., Meynet, N., & Bentaib, A., & Allelein, H.-J. (2014). Passive autocatalytic recombiners operations in the presence of hydrogen and carbon monoxide: Experimental study and model development. Nucl. Eng. Des., 266, 137–147.
- 10. Poling, B. E., Prausnitz, J. M., & O'Connell, J. P. (2001). The properties of gases and liquids. Boston, USA: McGraw-Hill Co.
- 11. Drinovac, P. (2006). Experimental studies on catalytic hydrogen recombiners for light water reactors. PhD Thesis, RWTH Aachen University, Germany.
- 12. The European Stainless Steel Association, Tables of technical properties of stainless steels. Retrieved in August 2014, from http://www.euro-inox.org/technical_tables/.
- 13. Churchill, S. W., & Chu, H. H. S. (1975). Correlating equations for laminar and turbulent free convection from a vertical plate. Int. J. Heat Mass Transfer, 18, 1323–1329.
- 14. Rohsenow, W. M., Hartnett, J. P., & Cho, Y. I. (1998). Handbook of heat transfer. New York, USA: McGraw-Hill Co.
- 15. Monarch Instrument. (2014). Table of total emissivity. Metals. Retrieved in August 2014, from http://www.monarchserver.com/TableofEmissivity.pdf.
- 16. Friedel, E., Rosen, A., & Kasemo, B. (1994). A laser induced fluorescence study on OH desorption from Pt in H2O/O2 and H2O/H2 mixtures. Langmuir, 10, 699–708.
- 17. Prabhudharwadkar, D. M., Aghalayam, P. A., & Iyer, K. N. (2011). Simulations of hydrogen mitigation in catalytic recombiner: Surface chemistry modelling. Nucl. Eng. Des., 241, 1746–1757.
- 18. Schefer, R. W. (1982). Catalyzed combustion of H2/air mixtures in a flat plate boundary layer: Numerical model. Combust. Flame, 45, 171–190.
- 19. SAS IP, Inc. (2012). Ansys Release 14.5 Theory Guide. Canonsburg, USA.
- 20. SAS IP, Inc. (2012). Ansys Release 14.5 User Guide. Canonsburg, USA.