Have a personal or library account? Click to login
Identification and Adjustment of Guide Rail Geometric Errors Based on BP Neural Network Cover

Identification and Adjustment of Guide Rail Geometric Errors Based on BP Neural Network

Measurement Science Review
Volume 17 (2017): Issue 3 (June 2017)
By: Gaiyun He,  Can Huang,  Longzhen Guo,  Guangming Sun and  Dawei Zhang  
Open Access
|Jun 2017

References

  1. [1] Okafor, A.C., Ertekin, Y.M. (2000). Derivation of machine tool error models and error compensation procedure for three axes vertical machining center using rigid body kinematics. International Journal of Machine Tools & Manufacture, 40 (8), 1199-1213.10.1016/S0890-6955(99)00105-4
    Search in Google ScholarBack to article
  2. [2] Tian, W., Gao, W., Zhang, D., Huang, T. (2014). A general approach for error modeling of machine tools. International Journal of Machine Tools & Manufacture, 79 (4), 17-23.10.1016/j.ijmachtools.2014.01.003
    Search in Google ScholarBack to article
  3. [3] Ohta, H., Tanaka, K. (2010). Vertical stiffnesses of preloaded linear guideway type ball bearings incorporating the flexibility of the carriage and rail. Journal of Tribology, 132 (1), 547-548.10.1115/1.4000277
    Search in Google ScholarBack to article
  4. [4] Rahmani, M., Bleicher, F. (2016). Experimental and numerical studies of the influence of geometric deviations in the performance of machine tools linear guides. Procedia CIRP, 41, 818-823.10.1016/j.procir.2015.08.089
    Search in Google ScholarBack to article
  5. [5] Shamoto, E., Park, C.H., Moriwaki, T. (2001). Analysis and improvement of motion accuracy of hydrostatic feed table. CIRP Annals - Manufacturing Technology, 50 (1), 285-290.10.1016/S0007-8506(07)62123-4
    Search in Google ScholarBack to article
  6. [6] Khim, G., Park, C.H., Shamoto, E., Kim, S.W. (2011). Prediction and compensation of motion accuracy in a linear motion bearing table. Precision Engineering, 35 (3), 393-399.10.1016/j.precisioneng.2010.12.006
    Search in Google ScholarBack to article
  7. [7] Khim, G., Oh, J.S., Park, C.H. (2014). Analysis of 5-DOF motion errors influenced by the guide rails of an aerostatic linear motion stage. International Journal of Precision Engineering and Manufacturing, 15 (2), 283-290.10.1007/s12541-014-0336-7
    Search in Google ScholarBack to article
  8. [8] Kim, G.H., Han, J.A., Lee, S.K. (2014). Motion error estimation of slide table on the consideration of guide parallelism and pad deflection. International Journal of Precision Engineering and Manufacturing, 15 (9), 1935-1946.10.1007/s12541-014-0548-x
    Search in Google ScholarBack to article
  9. [9] Li, J., Mao, K., Chen, Q., Nie, Y. (2015). Experimental research of large components of machine tools assembly stress distribution under different assembly process. Machine Tool & Hydraulics, 43 (21), 118-122.
    Search in Google ScholarBack to article
  10. [10] Bosetti, P., Bruschi, S. (2012). Enhancing positioning accuracy of CNC machine tools by means of direct measurement of deformation. The International Journal of Advanced Manufacturing Technology, 58 (5), 651-662.10.1007/s00170-011-3411-6
    Search in Google ScholarBack to article
  11. [11] Liu, Y., Liu, M., Yi, C., Chen, M. (2014). Measurement of the deformation field for machine tool based on optical fiber Bragg grating sensors. In International Conference on Innovative Design and Manufacturing, 13-15 August 2014. IEEE, Vol. 971-973, 222-226.10.1109/IDAM.2014.6912698
    Search in Google ScholarBack to article
  12. [12] Chlebus, E., Dybala, B. (1999). Modelling and calculation of properties of sliding guideways. International Journal of Machine Tools & Manufacture, 39 (12), 1823-1839.10.1016/S0890-6955(99)00041-3
    Search in Google ScholarBack to article
  13. [13] Majda, P. (2012). Relation between kinematic straightness errors and angular errors of machine tool. Advances in Manufacturing Science & Technology, 36, 47-53.
    Search in Google ScholarBack to article
  14. [14] Majda, P. (2012). Modeling of geometric errors of linear guideway and their influence on joint kinematic error in machine tools. Precision Engineering, 36 (3), 369-378.10.1016/j.precisioneng.2012.02.001
    Search in Google ScholarBack to article
  15. [15] Shi, Y., Zhao, X., Zhang, H., Nie, Y., Zhang, D. (2016). A new top-down design method for the stiffness of precision machine tools. The International Journal of Advanced Manufacturing Technology, 83 (9), 1887-1904.10.1007/s00170-015-7705-y
    Search in Google ScholarBack to article
  16. [16] Zhupanska, O.I. (2011). Contact problem for elastic spheres: Applicability of the Hertz theory to non-small contact areas. International Journal of Engineering Science, 49 (7), 576-588.10.1016/j.ijengsci.2011.02.003
    Search in Google ScholarBack to article
  17. [17] THK Co., Ltd. (2008). THK Linear Motion System Catalog.
    Search in Google ScholarBack to article
  18. [18] Kowalik, M., Rucki, M., Paszta, P., Gołębski, R. (2016). Plastic deformations of measured object surface in contact with undeformable surface of measuring tool. Measurement Science Review, 16 (5), 254-259.10.1515/msr-2016-0031
    Search in Google ScholarBack to article
  19. [19] Gawedzki, W., Tarnowski, J. (2015). Design and testing of the strain transducer for measuring deformations of pipelines operating in the mining-deformable ground environment. Measurement Science Review, 15 (5), 256-262.10.1515/msr-2015-0035
    Search in Google ScholarBack to article
  20. [20] Fuh, K.H., Wang, S.B. (1997). Force modeling and forecasting in creep feed grinding using improved BP neural network. International Journal of Machine Tools & Manufacture, 37 (8), 1167-1178.10.1016/S0890-6955(96)00012-0
    Search in Google ScholarBack to article
  21. [21] Basheer, I.A., Hajmeer, M. (2000). Artificial neural networks: Fundamentals, computing, design, and application. Journal of Microbiological Methods, 43 (1), 3-31.10.1016/S0167-7012(00)00201-3
    Search in Google ScholarBack to article
  22. [22] Rafiq, M.Y., Bugmann, G., Easterbrook, D.J. (2001). Neural network design for engineering applications. Computers & Structures, 79 (17), 1541-1552.10.1016/S0045-7949(01)00039-6
    Search in Google ScholarBack to article
  23. [23] Tsui, K. (2007). Strategies for planning experiments using orthogonal arrays and confounding tables. Quality & Reliability Engineering, 4 (2), 113-122.
    Search in Google ScholarBack to article
  24. [24] Ekinci, T.O., Mayer, J.R.R. (2007). Relationships between straightness and angular kinematic errors in machines. International Journal of Machine Tools & Manufacture, 47 (12-13), 1997-2004.10.1016/j.ijmachtools.2007.02.002
    Search in Google ScholarBack to article
DOI: https://doi.org/10.1515/msr-2017-0017 | Journal eISSN: 1335-8871
Journal RSS Feed
Language: English
Page range: 135 - 144
Submitted on: Feb 2, 2017
|
Accepted on: May 18, 2017
|
Published on: Jun 15, 2017
Published by: Slovak Academy of Sciences, Institute of Measurement Science
In partnership with: Paradigm Publishing Services
Publication frequency: Volume open
Keywords:
Guide rail geometric error,
stress,
the test plate,
finite element model,
BP neural network
Related subjects:
Engineering,
Electrical engineering,
Control engineering, metrology and testing

© 2017 Gaiyun He, Can Huang, Longzhen Guo, Guangming Sun, Dawei Zhang, published by Slovak Academy of Sciences, Institute of Measurement Science
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Previous articleVolume 17 (2017): Issue 3 (June 2017)Next article