References
- [1] Schena, E., Massaroni, C., Saccomandi, P., Cecchini, S. (2015). Flow measurement in mechanical ventilation: A review. Medical Engineering & Physics, 37 (3), 257-264.
- [2] Thorn, R., Johansen, G.A., Hjertaker, B.T. (2013). Three-phase flow measurement in the petroleum industry. Measurement Science and Technology, 24 (1), 12003-12019.
- [3] Jiang, W., Zhang T., Xu, Y., et al. (2016). The effects of fluid viscosity on the orifice rotameter. Measurement Science Review, 16 (2), 87-95.
- [4] Fincham, A.M., Spedding, G.R. (1997). Low cost, high resolution DPIV for measurement of turbulent fluid flow. Experiments in Fluids, 23 (6), 449-462.
- [5] Santi, P.M. (2014). Precision and accuracy in debrisflow volume measurement. Environmental & Engineering Geoscience, 20 (4), 349-359.
- [6] Daev, Z.A. (2015). A comparative analysis of the discharge coefficients of variable pressure-drop flowmeters. Measurement Techniques, 58 (3), 323-326.
- [7] Nukui, K., Komiya, K., Kagawa, T. (2009). Effect of temperature sensor position on differential pressure measurement in orifice type flowmeter. Journal of Clinical Psychopharmacology, 38 (3), 233-238.
- [8] Xu, L., Zhou, W., Li, X., et al. (2011). Wet-gas flow modeling for the straight section of throat-extended Venturi meter. IEEE Transactions on Instrumentation and Measurement, 60 (6), 2080-2087.
- [9] Nithin, T., Jain, N., Hiriyannaiah, A. (2012). Optimization of Venturi flow meter model for the angle of divergence with minimal pressure drop by computational fluid dynamics method. In International Conference on Challenges and Opportunities in Mechanical Engineering, Industrial Engineering and Management Studies (ICCOMIM 2012), July 11-13, 2012, 658-670.
- [10] Wei, C., Tan, Ch., Dong, F. (2011). Numerical simulation and optimal design for cone flowmeter. Journal of Engineering Thermophysics, 32 (7), 1165-1168.
- [11] Daev, Zh.A. (2015). A comparative analysis of the discharge coefficients of variable pressure-drop flowmeters. Measurement Techniques, 58 (3), 323-326.
- [12] Guo, S., Sun, L., Zhang, T., Yang, W., Yang, Z. (2013). Analysis of viscosity effect on turbine flowmeter performance based on experiments and CFD simulations. Flow Measurement & Instrumentation, 34 (5), 42-52.
- [13] Sleigh, A. (2009). Real fluids - Pressure loss during laminar flow in a pipe. University of Leeds, UK, http://www.efm.leeds.ac.uk/CIVE/CIVE1400/Section4/laminar_turbulent.htm.
- [14] Mihailovic, D.T., Gualtieri, C. (Editors) (2010). Advances in Environmental Fluid Mechanics. World Scientific Publishing Company, ISBN 978-981-4465-97-7.
- [15] Thorel, L., Gaudin, C., Rault, G., Garnier, J., Favraud, C. (2007). A cone pressuremeter for soil characterisation in the centrifuge. International Journal of Physical Modelling in Geotechnics, 7 (1), 25-32.
- [16] Xu, Y., Chen, W., Zhang, T., Liu, W. (2015). Study on applicability of turbulence model for V-cone flowmeter with double support. Chinese Journal of Scientific Instrument, 36 (2), 459-465.