References
- [1] Sharke, P. (2003). Measuring across space and time: Large-scale metrology moves GPS in out of the rain. Mechanical Engineering, 125 (1), 48.
- [2] Lin, J., Zhu, J., Guo, Y., Guo, T., Ye, S. (2012). Establishment of precise three-dimensional coordinate control network in field large-space. Chinese Journal of Mechanical Engineering, 48 (4), 6-11.
- [3] Hughes, B., Forbes, A., Lewis, A., Sun, W., Veal, D., Nasr, K. (2011). Laser tracker error determination using a network measurement. Measurement Science and Technology, 22, 1-12.
- [4] Hughes, E.B., Wilson, A., Peggs, G.N. (2000). Design of a high-accuracy CMM based on multilateration techniques. CIRP Annals - Manufacturing Technology, 49 (1), 391-394.
- [5] Takatsuji, T., Goto, M., Kirita, A. (2000). The relationship between the measurement error and the arrangement of laser trackers in laser trilateration. Measurement Science and Technology, 11 (5), 477-483.
- [6] Zhang, D., Rolt, S., Maropoulos, P.G. (2005). Modeling and optimization of novel laser multilateration schemes for high-precision applications. Measurement Science and Technology, 16, 2541-2547.
- [7] Wang, J., Guo, J. (2011). Method of geometric error identification for numerical control machine tool based on laser tracker. Chinese Journal of Mechanical Engineering, 14, 13-19.
- [8] Wang, J., Guo, J. (2013). Algorithm for detecting volumetric geometric accuracy of NC machine tool by laser tracker. Chinese Journal of Mechanical Engineering, 26, 166-175.
- [9] Wang, J., Guo, J., Zhang, G. (2012). The technical method of geometric error measurement for multi-axis NC machine tool by laser tracker. Measurement Science and Technology, 23, 1-11.
- [10] Umetsu, K., Furutani, R., Takatsuji, T., Osawa, S., Kurosawa, T. (2003). Calibration of a CMM using a laser tracking system. In XVII IMEKO World Congress, June 22-27, 2003, Dubrovnik, Croatia. TC14, 1860-1863.
- [11] Muralikrishnan, B., Sawyer, D., Blackburn, C., Phillips, S. (2009). ASME B89.4.19 performance evaluation tests and geometric misalignments in laser trackers. Journal of Research of the National Institute of Standards and Technology, 114, 21-35.
- [12] Schwenke, H., Schmitt, R., Jatzkowski, P., Warmann, C. (2009). On-the-fly calibration of linear and rotary axes of machine tools and CMMs using a tracking interferometer. CIRP Annals - Manufacturing Technology, 58, 477-480.
- [13] Schwenke, H., Frank, M., Hannaford, J. (2005). Error mapping of CMMs and machine tools by a single tracking interferometer. CIRP Annals - Manufacturing Technology, 54 (1), 475-478.
- [14] Härtig, F., Keck, C., Kniel, K., Schwenke, H. (2003). Improvement of measurement accuracy by combined evaluation of CMM and tracking interferometer measurement. In XVII IMEKO World Congress, June 22-27, 2003, Dubrovnik, Croatia. TC7, 1172-1175.