References
- [1] Barker, M.J., Colclough, M.S. (1997). A two-dimensional capacitive position transducer with rotation output. Review of Scientific Instruments, 68 (8), 3238-3240.
- [2] Yu, H., Zhang, L., Shen, M. (2015). Novel capacitive displacement sensor based on interlocking stator electrodes with sequential commutating excitation. Sensors and Actuators A - Physical, 230, 94-101.
- [3] Ahn, H.J. (2006). A cylindrical capacitive sensor (CCS) for both radial and axial motion measurements. Measurement Science and Technology, 17 (7), 2027-2034.
- [4] Kuijpers, A.A., Krijnen, G.J.M., Wiegerink, R.J., Lammerink, T.S.J., Elwenspoek, M. (2006). A micromachined capacitive incremental position sensor: Part 1. Analysis and simulations. Journal of Micromechanics and Microengineering, 16 (6), S116-S124.
- [5] Kim, M., Moon, W., Yoon, E., Lee, K.R. (2006). A new capacitive displacement sensor with high accuracy and long-range. Sensors and Actuators A - Physical, 130, 135-141.
- [6] Huang, X.H., Lee, J.I., Ramakrishnan, N., Bedillion, M., Chu, P. (2010). Nano-positioning of an electromagnetic scanner with a MEMS capacitive sensor. Mechatronics, 20 (1), 27-34.
- [7] Benedek, P., Silvester, P. (1972). Capacitance of parallel rectangular plates separated by a dielectric sheet. IEEE Transactions on Microwave Theory and Techniques, MTT-20 (8), 504-510.
- [8] Wolff, I., Knoppik, N. (1974). Rectangular and circular microstrip disk capacitors and resonators. IEEE Transactions on Microwave Theory and Techniques, MTT-22 (10), 857-864.
- [9] Ahn, H-J., Jeon, S. (2012). Error analysis of a new cylindrical capacitive sensor (CCS) for measuring five-dimensional motions of a rotor. Mechanical Systems and Signal Processing, 29, 148-163.
- [10] Heydemann, P.L.M. (1981). Determination and correction of quadrature fringe measurement errors in interferometers. Applied Optics, 20 (19), 3382-3384.
- [11] Tan, K.K., Zhou, H.X.X., Lee, T.H. (2002). New interpolation method for quadrature encoder signals. IEEE Transactions on Instrumentation and Measurement, 51 (5), 1073-1079.
- [12] Hu, H.J., Qiu, X.Q., Wang, J., Ju, A.S., Zhang, Y.B. (2009). Subdivision and direction recognition of lambda/16 of orthogonal fringes for nanometric measurement. Applied Optics, 48 (33), 6479-6484.
- [13] Benammar, M., Ben-Brahim, L., Alhamadi, M.A., Al-Naemi, M. (2008). A novel method for estimating the angle from analog co-sinusoidal quadrature signals. Sensors and Actuators A - Physical, 142 (1), 225-231.
- [14] Ryabko, M., Koptyaev, S., Shcherbakov, A., Lantsov, A. (2014). Interferometer-based technology for optical nanoscale inspection. Measurement Science Review, 14 (1), 25-28.
- [15] Sysoev, E., Kulikov, R., Vykhristyuk, I., Chugui, Y. (2015). Correction of scanning steps to improve accuracy in interferometric profilometer. Measurement Science Review, 15 (1), 9-12.
- [16] Yu, J.P., Wang, W., Lu, K.Q., Mei, D.Q., Chen, Z.C. (2013). A planar capacitive sensor for 2D long-range displacement measurement. Journal of Zhejiang University SCIENCE C, 14 (4), 252-257.