References
- 1. Hong-Liang, D.; Hao-Jie, J.; Ting, D.; Wei-Li, X.; Ai-Hiu, L. Investigation on the influence of damage to springback of U-shape HSLA steel plates. Journal of Alloys and Compounds 2017, 708, 575-586.
- 2. Mohrbacher, H. Green and Sustainable Manufacturing of Advanced Material, Chapter 6 - High-Performance Steels for Sustainable Manufacturing of Vehicles, pp. 135-163. Schilde (in Belgium), 2016. ISBN: 978-0-12-411497-5.
- 3. Zhenyu, L.; Raymundo, O., O.; Yinkai, L.; Calixto, I., G.; Guofeg, W. Microstructural characterization and recrystallization kinetics modeling of annealing cold-rolled vanadium microalloyed HSLA steel. Journal of Alloys and Compounds 2016, 679, 293-301.
- 4. Gao, C., Y.; Lu, W., R.; Zhang, L., C.; Yan, H., Y. A constitutive description of the thermo-viscoplastic behavior of body-centered cubic metals. Materials and Design 2012, 36, 671-678.
- 5. Xizhang, Ch.; Yuming, H. Hot deformation behavior of HSLA steel Q690 and phase transformation during compression. Jorunal of Alloys and Compounds 2015, 619, 564-571.
- 6. Xizhang, Ch.; Yuming, H.; Yucheng, L. Microstructure and properties of 700 MPa grade HSLA steel during high temperature deformation. Journal of Alloys and Compounds 2015, 631, 225-231.
- 7. Neslušan, M.; Mičieta, B.; Mičietová, A.; Čiliková, M.; Mrkvica, I. Detection of tool breakage during hard turning through acoustic emission at low removal rates. Measurement 2015, 70, 1-13.
- 8. Mhaede, M.; Pastorek, F.; Hadzima, B. Influence of shot peening on corrosion properties of biocompatible magnesium alloy AZ31 coated by dicalcium phosphate dihydrate (DCPD). Materials Science and Engineering C 2014, 39, 330-335.
- 9. Trško, L.; Guagliano, M.; Bokůvka, O.; Nový, F. Fatigue life of AW 7075 Aluminium Alloy after severe shote peening treatment with different intensities. Procedia Engineering 2014, 74, 246-252.
- 10. Trško, L.; Bokůvka, O.; Nový, F.; Guagliano, M. Effect of severe shot peening on ultra-high-cycle fatigue of a lowalloy steel. Mareials and Design 2014, 57, 103-113.
- 11. Miková, K.; Bagherifard, S.; Bokůvka, O.; Guagliano, M.; Trško, L. Fatigue behavior of X70 microalloyed steel after severe shot peening. International Journal of Fagitue 2013, 55, 33-42.10.1016/j.ijfatigue.2013.04.021
- 12. Banczek, E., P.; Rodrigues, P., R., P.; Costa, I. The effects ofniobium and nickel on the corrosion resistance of the zinc phosphate layers. Surface and Coatings Technology 2008, 202 (10), 2008-2014.
- 13. Díaz, B.; Freire, L.; Mojío, M.; Nóvoa, X., R. Optimization of conversion coatings based on zinc phosphate on high strength steels, with enhanced barrier properties. Journal of Electroanalytical Chemistry 2015, 737, 174-183.
- 14. Galvan-Reyes, C.; Salinas-Rodríguez, A.; Fuentes-Aceituno, J., C. Degradation and crystalline reorganization of hurealite crystals during the manganese phosphating of a high strength steel. Surface and Coatings Technology 2015, 275, 10-20.
- 15. Wang, Ch.; Liau, H.; Tsai, W. Effects of temperature and applied potential on the microstructure and electrochemical behavior of manganese phosphate coating. Surface and Coatings Technology 2006, 201 (6), 2994-3001.
- 16. Wang, Ch.; Liau, H.; Tsai, W. Effect of heat treatment on the microstructure and electrochemical behavior of manganese phospate coating. Materials Chemistry and Physics 2007, 102 (2-3), 207-213.10.1016/j.matchemphys.2006.12.012
- 17. Bogi, J.; Macmillan, R. Phosphate conversion coatings on steel. Journal of Materials Science 1977, 12 (11) 2235-2240.
- 18. Werner, R. Phosphating of Metals. Finishing Publications Ltd & ASM International; 2nd edition. 1990. ISBN 978-0904477115.
- 19. Jegannathan, S.; Sankara Narayanan, T., S., N.; Ravichandran, K.; Rajeswari S. Preformance of zinc phosphate coatings obtained by cathodic electrochemical treatment in accelerated corrosion tests. Electrochemica Acta 2005, 51 (2), 247-256.
- 20. Kozlowski, A. Dry friction of manganese phosphate coatings on steel and cast iron. Electrodeposition and Surface Treatment 1974, 2 (2), 109-122.
- 21. Perry, J.; Eyre, S., T. The effect of phosphating on the friction and wear properties of grey cast iron. Wear 1977, 43 (2), 185-197.10.1016/0043-1648(77)90113-2
- 22. Galvan-Reyes, C.; Salinas-Rodríguez, A.; Fuentes-Aceituno, J., C. The role of alkalizing agent on the manganese phosphating of a high strength steel part 1: The individual effect of NaOH and NH4OH. Surface and Coatings Technology 2016, 291, 179-188.
- 23. Galvan-Reyes, C.; Salinas-Rodríguez, A.; Fuentes-Aceituno, J., C. The role of alkalizing agent on the manganese phosphating of a high strength steel part 2: The combined effect of NaOH and the amino group (NH4OH, monoethanolamine and NH4NO3) on the degradation stage of the phosphating mechanism. Surface and Coatings Technology 2016, 299, 113-122.
- 24. Ghali, I., E.; Potvin, A., J., R. The mechanism of phosphating of steel. Corrosion Science 1972, 12 (7), 583-594.10.1016/S0010-938X(72)90118-7
- 25. Pastorek, F.; Borko, K.; Dundeková, S.; Fintová, S.; Hadzima, B.: Elektrochemické korózne charakteristiky fosfátovanej ocele S355J2 v prostredí síranov - Electrochemical corrosion characteristics of phosphated S355J2 steel in sulfate environment. Koroze a ochrana materiálu 2016, 60 (4), 107-113.
- 26. Borko, K.; Pastorek, F.; Hadzima B.: Elektrochemické korózne charakteristiky vysokopevnej ocele Domex 700 po mechanických úpravách v prostredí chloridov - Electrochemical corrosion characteristics of high strength low alloy Domex 700 steel after mechanical surface treatment in chloride environment. Koroze a a materiálu 2017, 61 (5), 162-168.