Influence of the adhesive type and metal substrate on adhesion of bonded joints after salt spray test
By: Klara Machalická, P. Pokorný and M. Vokáč
Abstract
This article was focused on the evaluation of neutral salt spray test effect (according to ISO 9124), procedure E4, on mechanical properties of load-bearing adhesive joints. The study also comprises the influence of substrate material (mild steel, aluminum alloys) and substrate surface roughness (verified by optical confocal microscopy). The experimental program contained acrylate-based adhesive and hybrid silicone polyurethane based adhesive which were applied in double lap joints loaded by shear.
Language: English
Page range: 54 - 64
Published on: Jun 12, 2018
Published by: Association of Czech and Slovak Corrosion Engineers
In partnership with: Paradigm Publishing Services
Publication frequency: Volume open
Related subjects:
© 2018 Klara Machalická, P. Pokorný, M. Vokáč, published by Association of Czech and Slovak Corrosion Engineers
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.