References
- [1] M. S. Vijava, Piezoelectric Materials and Devices-Applications Engineering and Medical Sciences, London, CRC Press Taylor&Francis Group, 2013.
- [2] D. Croft, D. Shedd and S. Devasia, “Creep Hysteresis, and Vibration Compensation for Piezoactuators: Atomic Force Microscopy Application”, Journal of Dynamic Systems, Measurement, and Control, vol. 123, no.1, pp. 35-43, November 2001.
- [3] Q. Zou, K. Leang, E. Sadoun, M. Reed and S. Devasia, “Control Issues High-Speed AFM for Biological Applications: Collagen Imaging Example”, Asian Journal of Control, vol. 6, no.2, pp. 164-178, June 2004.
- [4] G. Stöppler and S. Douglas, “Adaptronic Gantry Machine Tool with Piezoelectric Actuator for Active Error Compensation of Structural Oscillations at the Tool Centre Point”, Mechatronics, vol. 18, no.8, pp. 426-433, Oct 2008.10.1016/j.mechatronics.2008.03.002
- [5] W. Yang, S. Y. Lee and B. J. You, “A Piezoelectric Actuator with a Motion-Decoupling Amplifier for Optical Disk Drives”, Smart Material Structure, vol. 19, no.6, 10pp. 065027, May 2010.
- [6] J. J. Wei, Z. C. Qiu, J. D. Han and Y. C. Wang, “Experimental Comparison Research on Active Vibration Control for Flexible Piezoelectric Manipulator Using Fuzzy Controller”, Journal of Intelligent and Robotic System, vol. 59, no.1, pp. 31-56, July 2010.
- [7] D. E. Brehl and T. A. Dow, “Review of vibration-assisted machining”, Precision Engineering, vol. 32, no.3, pp. 153-172, July 2008.
- [8] S. R. Anton and H. A. Sodano, “A review of power harvesting using piezoelectric materials”, Smart Materials and Structures, vol. 16, no.3, pp. R1-R21, May 2007.
- [9] P. Norman, M. Backström, M. Rantatalo, A. Svoboda and A. Kaplan, “A sophisticated platform for characterization, monitoring and control of machining”, Measurement Science and Technology, vol. 17, no.4, pp. 847-854, March 2006.10.1088/0957-0233/17/4/032
- [10] X. D. Wang, N. Li, M. W. Lin and L. D. Wang, “Dynamic characteristic testing for MEMS micro-devices with base excitation”, Measurement Science and Technology, vol. 18, no.6, pp. 1740-1747, May 2007.
- [11] S. Zhen, B. Chen, L. Yuan, M. Li, J. Liang and B. Yu, “A novel interferometric vibration measurement sensor with quadrature detection based on 1/8 wave plate”, Optics and Laser Technology, vol. 42, no.2, pp. 326-365, March 2010.
- [12] S. Park, C. B. Yun, Y. Roh and J. J. Lee, “Health monitoring of steel structures using impedance of thickness modes at PZT patches”, Smart Structures and Systems, vol. 1, no.4, pp. 339-353, Oct 2005.
- [13] S. Prasad, “Two-Port Electroacoustic Model of Piezoelectric Composite Circular Plate”, Master’s Thesis, University of Florida, Gainesville, FL, USA, 2002.
- [14] Q. Gallas, R. Holman, T. Nishida, B. Carroll, M. Sheplak and L. Cattafesta, “Lumped Element Modeling of Piezoelectric-Driven Synthetic Jet Actuators”, AIAA Journal, vol. 41, no.2, pp. 240-247, February 2003.
- [15] S. Prasad, Q. Gallas, S. Horowitz, B. Homeijer, B. Sankar, L. Cattafesta and M. Sheplak, “Analytical Electroacoustic Model of a Piezoelectric Composite Circular Plate”, AIAA Journal, vol. 44, no.10, pp. 2311-2318, Oct 2006.
- [16] M. Chiatto, F. Capuano, G. Coppola and L. Luca, “LEM Characterization of Synthetic Jet Actuators Driven by Piezoelectric Element: A Review”, Sensors, vol. 17, no.6, 31pp. 1216, May 2017.
- [17] L. Sui, X. Xiong and G. Shi, “Piezoelectric Actuator Design and Application on Active Vibration Control”, Physics Procedia, vol. 25, pp. 1388-1396, 2012.
- [18] C. Ru, L. Chen, B. Shao, W. Rong and L. Sun, “A hysteresis compensation method of piezoelectric actuator: Model, identification and control”, Control Engineering Practice, vol. 17, no.9, pp. 1107-1114, September 2009.
- [19] J. Peng and X. Chen, “A Survey of Modeling and Control of Piezoelectric Actuators”, Modern Mechanical Engineering, vol. 3, pp. 1-20, February 2013.10.4236/mme.2013.31001
- [20] L. Parali and A. Sari, “Vibration Modelling of Piezoelectric Actuator (PEA) using Simulink Software”, ICEEE Electrical and Electronic Engineering, 2017 4th International Conference, pp. 153-157, April 2017.
- [21] W. Qingming, Z. Qiang, Z. Chi and C. Gang, “Vibration Control of Block Forming Machine Based on an Artificial Neural Network”, 4th International Symposium on Neural Networks, Nanjing, China, June 2007.
- [22] X. Yang, W. Li, G. Ye and X. Su, “Hysteresis Modeling of Piezo Actuator Using Neural Networks”, IEEE International Conference on Robotics and Biomimetics (ROBIO 2008), Bangkok, Thailand, February 2009.
- [23] K. G. Ahn, H. J. Pahk and M. Y. Jung, “A hybrid-type active vibration isolation system using neural networks”, Journal of Sound and Vibrations, vol. 192, no.4, pp. 793-805, May 1996.
- [24] “Murata Manufacturing Co., Ltd. Piezoelectric Sound Components”, [Online] http://www.murata.com/en-global/products/sound.
- [25] “LK-G3000 series High-speed, High-accuracy CCD Laser Displacement Sensor”, [Online] http://www.keyence.eu/products/measure/laser-1d/lk-g3000/index.jsp.
- [26] L. Parali, J. Pechousek, I. Sabikoglu, P. Novak, J. Navarik and M. Vujtek, “A digital measurement system based on laser displacement sensor for piezoelectric ceramic discs vibration characterization”, Optik - International Journal for Light and Electron Optics, vol. 127, no.1, pp. 84-89, January 2016.
- [27] Y. C. Lin and C. C. Ma, “Experimental Measurement and Numerical Analysis on Resonant Characteristics of Piezoelectric Disks with Partial Electrode Designs”, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 51, no.8, pp. 937-947, August 2004.
- [28] J. Han, M. Kamber and J. Pei, Data mining: concepts and techniques, 3rd edition, Morgan Kaufmann Publishers, 2001.
- [29] S. Wu, F. Crestani and Y. Bi, Evaluating score normalization methods data fusion, 3th Asia Information Retrieval Technology (AIRS’06), Beijing, China, December 2006.
- [30] I. Witten and E. Frank, Data mining: practical machine learning tools and techniques, 2nd edition, Morgan Kaufmann series data management systems, 2005.
- [31] E. L. Lehman and G. Casella, Theory of Point Estimation, New York, Springer, 2003.