References
- [1] “International Technology Roadmap for Semiconductors”, [On- line] http://www.itrs2.net.
- [2] Y. Shouli and E. Sanchez-Sinencio, “Low Voltage Analog Cir- cuit Design Techniques: A Tutorial”, IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, vol. 83, no. 2, pp. 179-196, 2000.
- [3] P. Hasler, T. S. Le, “Overview of Floating-Gate Devices, Circits, and Systems”, IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, vol. 48, pp. 1-3, 2001.
- [4] K. J. Baek, J. M. Gim, H. S. Kim, K. Y. Na, N. S. Kim and Y. S. Kim, “Analogue Circuit Design Methodology using Self-Cascode Structures”, Electronics Letters, vol. 49, no. 9, pp. 591-592, April 2013.
- [5] J. F. Duque-Carrillo; J. L. Ausin; G. Torelli, G. M. Valverde and M. A. Deminquez, “1-V rail-to-rail operational amplifiers stan- dard CMOS technology”, IEEE Journal of Solid-State Circuits, vol. 35, no. 1, pp. 33-44, 2000.
- [6] A. Chandrakasan, A. W. B. H. C. Sub-Threshold Design for Ultra Low-Power Systems, Springer, 2006.
- [7] F. Khateb, D. Biolek, N. Khatib and J. Vavra, “Utilizing the Bulk-Driven Technique Analog Circuit Design”, IEEE 13th In- ternational Symposium on Design and Diagnostics of Electronic Circuits and Systems (DDECS), pp. 16-19, 2010.
- [8] F. Assaderaghi, D. Sinitsky, S. A. Parke, J. Bokor, P. K. Ko and C. Hu, “Dynamic Threshold-Voltage MOSFET (DTMOS) for Ultra-Low Voltage VLSI”, IEEE Transactions on Electron Devices, vol. 44, no.3, pp. 414-422, Mar 1997.
- [9] L. Zuo, Low-Voltage Bulk Driven Amplifier Design and its Ap- plication Inplantable Biomedical Sensors, University of Ten- nessee, Knoxville, April 2012.
- [10] P. E. Allen and D. R. Holberg, CMOS Analog Circuit Design, Oxford: Oxford University Press, 2002.
- [11] B. Razavi, Design of Analog CMOS Integrated Circuits, New: McGraw-Hill, Inc., 2001.
- [12] J. Koomen, “An integrated low power hirhly linear 2.4GHz CMOS Receiver Front/End based on Current Amplification and Mixing”, Solid-State Electronics, vol. 16, no. 7, pp. 801-810, June 1973.
- [13] E. Vittoz and J. Fellrah, “CMOS Analog Integrated Cir- cuits based on Weak Inversion Operations”, IEEE Journal of Solid-State Circuits, vol. 12, no. 3, pp. 224-231, 1977.
- [14] A. Anderou, K. Boahen, P. Pouliquen, A. Pavasovic, R. Jenkins and K. Strohbehn, “Current-Mode Subthreshold MOS Circuits for Analog VLSI Neural Systems”, IEEE Transactions on Neural Networks, vol. 2, no. 2, pp. 205-213, Mar 1991.
- [15] F. Maloberti, F. Francesconi, P. Malcovati and O. Nys, “Design Considerations on Low-Voltage Low-Power Data Converters”, IEEE Transactions on Circuits and Systems I, vol. 42, no. 11, pp. 853-863, November 1995.
- [16] F. Silveira, D. Flandre and A. Jespers, “A gm/ID based Methodology for the Design of CMOS Analog Circuits and its Application to the Synthesis of a Silicon-on-Insulator Microp- ower OTA”, IEEE Journal of Solid-State Circuits, vol. 31, no. 9, pp. 1314-1319, April 1996.
- [17] A. I. A. Cunha, M. C. Schneider and C. Galup-Montoro, “An MOS Transistor Model for Analog Circuit Design”, IEEE Jour- nal of Solid-State Circuits, vol. 33, no. 10, pp. 1510-1519, Oct.1998.
- [18] D. M. Binkley, Tradeoffs and Optimization Analog CMOS De- sign, Cambridge, UK: Cambridge University Press, 2010.
- [19] A. Guzinski, M. Bialko and J. C. Matheau, “Bodydriven Dif- ferential Amplifier for Application Continuousime Active-C Fil- ter”, ECCTD ’87: European Conference of Circuit Theory and Design, 1987.
- [20] B. J. Blalock, P. E. Allen and G. A. Rincon-Mora, “A 1 v CMOS op amp using Bulk-Driven MOSFETs”, IEEE Interna- tional Solid-State Circuits Conference, 1995.
- [21] D. Kontos, K. Domanski, R. Gauthier, K. Chatty, M. Muham- mad, C. Seguin, R. Halbach, C. Russ and D. Alvarez, “Investi- gation of External Latchup Robustness of Dual and Triple Well Designs 65 nm Bulk CMOS Technology”, IEEE International Reliability Physics Symposium Proceedings, pp. 145-150, 2006.
- [22] A. Shrivastava, A. P. Gangwar, R. Kuman and R. Dhiman, “A 60 dB Bulk-Driven Rail-to-Rail Input/Output OTA”, 2016 IEEE International Symposium on Nanoelectronic and Informa- tion Systems (iNIS), Gwalior, 2016.
- [23] D. Arbet, V. Stopjakov´a, M. Kov´aˇc, L. Nagy, M. Rak´us and M. Sovˇc´ık , “130 nm CMOS Bulk-Driven Variable Gain Amplifier for Low-Voltage Applications”, Journal of Circuits, Systems and Computers, vol. 26, no. 8, p. 1740003, 2017.
- [24] A. S. Sedra and, K. C. Smith, Microelectronic Circuits, Oxford, UK: Oxford University Press, 2011.
- [25] M. Rakús, V. Stopjakov´a and D. Arbet, “Comparison of Gate-Driven and Bulk-Driven Current Mirror Topologies”, IEEE 19th International Symposium on Design and Diagnostics of Elec- tronic Circuits Systems (DDECS), Koˇsice, Slovakia, April 2016.
- [26] M. Rakús, V. Stopjakov´a and D. Arbet, “Analysis of Bulk-Driven and Dynamic-Threshold Current Mirrors for Low-Volt- age Applications”, Design and Diagnostics of Electronic Circuits and Systems (DDECS), Dresden, Germany, April 2017.