Possibility of Using Microstructures in Buildings’ Ventilation and Heating Systems

Majewski, Grzegorz; Orman, Łukasz J.

doi:10.1515/cee-2017-0008

Abstract

The paper discusses the issue of using microstructures as the heat enhancement technique that can be applied in ventilation and heating systems. The possibilities of usage are given and the experimental test results are presented. They prove that the application of microstructures may significantly improve the heat flux value exchanged during boiling of distilled water.

References

[1] MARTO, P.J. - WANNIARACHCHI, A.S. - POLIDO, R.J.: Augmenting the nucleate pool-boiling characteristics of Gewa-T finned tubes in R-113, Augmentation of Heat Transfer in Energy Systems, ASME-HTD, Vol. 52, pp. 67 – 73, 1985.
Search in Google Scholar Back to article
[2] MERTZ, R. - GROLL, M. - VASILIEV, L.L. - KHROLENOK, V.V. - KHALATOV, A.A. - KOVALENKO, G.V. - GELETUHA, G.: Pool boiling from enhanced tubular heat transfer surfaces, Proc. of 11th Int. Heat Transfer Conf, Kyongju, Korea, Vol. 2, pp. 455 – 460, 1998.
Search in Google Scholar Back to article
[3] GOTTZMANN, C.F. - WULF, J.B. - O’NEILL, P.: Theory and application of high performance boiling surfaces to components of absorption cycle air conditioners, Proc. Conf. Natural Gas. Res. and Techn., Chicago, 1971, pp. 1 – 14.
Search in Google Scholar Back to article
[4] THOME, J.R.: Engineering Data Book III, Wolverine Tube, 2004.
Search in Google Scholar Back to article
[5] SILVERSTEIN, C.C.: Design and technology of heat pipes for cooling and heat exchange, Washington, 1992.
Search in Google Scholar Back to article
[6] OCHTERBECK, J.M.: Heat Pipes, in Heat Transfer Handbook, Bejan A., Kraus A.D. (ed), Wilay John & Sons Inc., 2003.10.1201/9781420039870.ch57
Search in Google Scholar Back to article
[7] ABD EL-BAKY, M.A. - MOHAMED, M.M.: Heat pipe heat exchanger for heat recovery in air conditioning, Applied Thermal Engineering, Vol. 27, 2007, pp. 795 – 801.10.1016/j.applthermaleng.2006.10.020
Search in Google Scholar Back to article
[8] ASAKAVIČJUS, I.P. - ŽUKAUSKAS, A.A. - GAJGALIS, V.A. - EVA, V.K.: Teplootdača freona-113, etilovogo spirta i vody v setčatych fitiljach, Lietuvos TSR Moksly akademijos darbai, B serija, I (104), 1978, pp. 87 – 93.
Search in Google Scholar Back to article
[9] ORMAN, Ł. J.: Boiling heat transfer on meshed surfaces of different aperture, Proceedings of Conference, “The Application of Experimental and Numerical Methods in Fluid Mechanics and Energetics 2014”, Liptovski Jan, Slovakia, 2014, pp. 177 – 180.10.1063/1.4892728
Search in Google Scholar Back to article
[10] NISHIKAWA, K. - ITO, T. - TANAKA, K.: Enhanced heat transfer by nucleate boiling on a sintered metal layer, Heat transfer – Japanese Research, Vol. 8, 1979, pp. 65 – 81.
Search in Google Scholar Back to article
[11] RANNENBERG, M. - BEER, H.: Heat transfer by evaporation in capillary porous wire mesh structures, Letters in Heat and Mass Transfer, Vol. 7, 1980, pp. 425 – 436.10.1016/0094-4548(80)90019-3
Search in Google Scholar Back to article
[12] XIN, M.D. - CHAO, Y.D.: Analysis and experiment of boiling heat transfer on T-shaped finned surfaces, Chem. Eng, Comm., Vol. 50, 1987, pp. 185 – 199.10.1080/00986448708911825
Search in Google Scholar Back to article

Possibility of Using Microstructures in Buildings’ Ventilation and Heating Systems

Abstract

Paradigm

My account